|
Title: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 08, 2019, 08:51:12 PM Hi all.
Bringing some S9s back online and noticed the Bitmain site has a Antminer-S9-all-201704270135-autofreq-user-Update2UBI-NF.tar.gz firmware release posted. Google seems to be failing me on any commentary however, and its been over a month. I'm coming from the 1117 release and was curious what peoples experience has been like. Is it recommended? Website claims the reboot problem has been fixed, which would be nice. See there is a newish "Low power enhanced mode" (came out in December firmware) that really seems to underclock the box. Only one review online that I've found so far though. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: mikeywith on April 08, 2019, 09:39:02 PM https://i.imgur.com/d0SJrQM.png (https://i.imgur.com/d0SJrQM.png)
being running on some of my gears and everything seems great so far. temps wise = better stable no random restart The Enhanced mode comes with it by default so you have to disable it if you don't want it https://i.imgur.com/BdqxsKR.png (https://i.imgur.com/BdqxsKR.png) it brought the hashrate down to 9th to 9.7th but temps were super low. i didn't measure power consumption but assuming the temps drop so i think power wise there should be a bit of improvements. TL;DR ; I find the March 2019 firmware to be good and stable overall. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 08, 2019, 11:19:22 PM ok, ran tests on (5) different known good 14TH S9s. Low Power Mode with Low Power Enhanced Mode provides about an 11% improvement in J/Th, although at a huge drop in performance.
https://puu.sh/DbY9k/b19af925ff.png (https://puu.sh/DbY9k/b19af925ff.png) That said, for folks like me with a lot of S9s powered off, its a big win. I can handle a ~32% performance hit, I'll just plug 32% more miners in! Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: mikeywith on April 09, 2019, 12:57:29 AM these results look great for guys who have a problem with power cost, have you tried disabling "Low Power Mode" while keeping "Low Power Enhanced Mode" ? i tried and nothing changed for me, so was wondering if that's the same case for everyone, i tried on 1 miner only tho just for fun.
Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 09, 2019, 01:47:28 AM Think I read on the Bitcoin Support page that Low Power Enhanced mode implies Low Power Mode. Having a bit of a problem with a few machines that previously were back leveled and set with fixed frequencies. Those don't work well with the new system. ok, updated about 90 machines, most went without issue. ONE is running at a fixed frequency, 600 MHz, and I can't seem to get it to down speed even though Low Power Enhanced Mode is toggled. Any suggestions? Should I just manually downclock it via minerAdvanced.cgi? Have another one that I can't SSH into. The web interface works, but SSH does not. Any suggestions? Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: PassThePopcorn on April 09, 2019, 01:52:11 AM This isn't any suggestion but more of a question on the other S9's. Does ssh work on the others?
Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 09, 2019, 02:40:34 AM This isn't any suggestion but more of a question on the other S9's. Does ssh work one the others? Yes, its works on all but two, so (88) Yes. (2) No. This prevents Awesome Miner from having configuration access btw. And since I can't SSH in, I can't manually add access. Update: This morning all the upgraded machines are refusing SSH access, which means I have no way to remotely poweroff, and tools like Awesome Miner can't change pools. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: euhctcyn on April 09, 2019, 09:03:00 AM Been running this fw in 21 miners for 1 month and no issues so far, I recommend it :)
Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 09, 2019, 01:20:45 PM Been running this fw in 21 miners for 1 month and no issues so far, I recommend it :) Any problems SSHing into your boxes? Other than 2/~90 I had problems with last night, all allowed it yesterday, but this morning, they are all blocking it. This is hobbling Awesome Miner. Based on 12 hours of running, I'm happy to confirm the need to reboot is gone. I'm not seeing ANY dip in performance over that time period. However, the disabling of SSH functionality, and apparently the ability to downgrade, even through the web app, is rather concerning. The Bitmain page indicates this release: Quote from: Bitmain 2.Add security firmware feature, enhance antminer security ability I suppose this is what they mean by that. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: euhctcyn on April 09, 2019, 02:44:05 PM Any problems SSHing into your boxes? Other than 2/~90 I had problems with last night, all allowed it yesterday, but this morning, they are all blocking it. This is hobbling Awesome Miner. I now have all S9s working at a friend's place and unfortunately have no direct access to them, so can't test it out, but I don't remember testing SSH after the firmware upgrade since I don't really need it :-\ Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: PassThePopcorn on April 09, 2019, 03:39:36 PM So for a few hours you were able to SSH and then it went away?
Are you not able to revert firmware? or did they just remove the previous firmware from the site so you no longer have it? If you reboot does SSH come back, as in is it a time lock? The S15 that I tested didn't have the capability to SSH in the released firmware, the code and programs to SSH were there just not enabled. Since we had no access to the systems we didn't go forward with more S15's and since the T15's were so similar never even thought of getting those. If this is the case it's possible they are trying to reduce the control users have over their own systems. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 09, 2019, 03:50:13 PM Hmmm, have to think about this. I actually changed the default pools (which requires SSH) PRIOR to upgrading the firmware, so perhaps not. Most of these machine have been unplugged since last November and had old pool choices. Knowing the machines would be rebooted when I changed firmware, I elected for change the pools first. So its possible SSH has been disabled since upgrading.
Rebooted does NOT enable SSH. Reverting via the web interface also fails after a few moments with a "Cannot find signature" error, at least with the 1117 and prior versions. It will let me reflash the current version. I've notified Patrik over at Awesome Miner, since this seriously cripples his software with S9s. Hoping he has come across this and has a work around (like they switched SSH ports or something). Hmmm, a portscan of a miner could prove interesting. Back with those results later. Update: Only 3 ports now open: 80 - HTTP web interface 4028 - Standard API port for monitoring 6060 ??? Bitmain ticket opened. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: BitMaxz on April 09, 2019, 10:13:37 PM Have you tried to factory reset the miner? If not try to reset it first it might enable the ssh back.
You can follow the "3 ways to factory reset the miner (https://support.bitmain.com/hc/en-us/articles/115003595387-How-to-reset-miner-to-factory-settings-)" Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 09, 2019, 11:09:15 PM Have you tried to factory reset the miner? If not try to reset it first it might enable the ssh back. You can follow the "3 ways to factory reset the miner (https://support.bitmain.com/hc/en-us/articles/115003595387-How-to-reset-miner-to-factory-settings-)" Yes, all three fail. All three do, however, reset the mining pools back to Bitmain defaults (which isn't a bad way to know what one ties did take). I have a ticket into Bitmain requesting a procedure to allow me to backlevel to the November release. Think I'll try just going back to December and see if it allows that. Update: Nope, the 1218 firmware results in the same "Cannot find signature" error that other previous releases I've tried die with. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: mikeywith on April 10, 2019, 12:59:42 AM Update: Nope, the 1218 firmware results in the same "Cannot find signature" error that other previous releases I've tried die with. There is a simple yet effective way to by pass that stupid signature thing , you can follow my thread here > https://bitcointalk.org/index.php?topic=5090664.msg48938476#msg48938476 in case that does not work, copy the code in this file upgrade.cgi post it here and i will alter the code so that it it will allow you to downgrade to any firmware you want. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: PassThePopcorn on April 10, 2019, 02:47:54 PM There is a simple yet effective way to by pass that stupid signature thing , you can follow my thread here > https://bitcointalk.org/index.php?topic=5090664.msg48938476#msg48938476 in case that does not work, copy the code in this file upgrade.cgi post it here and i will alter the code so that it it will allow you to downgrade to any firmware you want. This would be useful, but they also limited ssh ability so there is no way to ssh in to edit the file. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 10, 2019, 03:31:05 PM So far, this is the only thing I have not tried that shows promise as a downgrade approach. Note it requires disassembly of your S9 to gain access to the control board jumpers. I'll likely try this later this week. Only good side: since you will have your hash cards out, its a fine time to clean them!
https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: mikeywith on April 10, 2019, 07:05:15 PM can you try this method > https://bitcointalk.org/index.php?topic=5128618.msg50519867#msg50519867
i had a batch that did not allow me to change the firmware, it also refused ssh connection , it's not exactly the same issue, but give it a shot. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 12, 2019, 04:10:19 PM Tried the "do it quickly after IP Button" approach using Chrome (Windows 7 though) without luck, but thanks for the reference. Trying the SD-Slot now. Been running for a few days now. Firmware seems to be reliable on 13.5TH and 14TH machines, but having problems with most of my 13TH boxes. This is typical: https://puu.sh/DdG80/3d228c9db0.png (https://puu.sh/DdG80/3d228c9db0.png) Any clues on what might be happening or how to get their hashrates back up? 7 of my 10 13TH boxes are doing this, 3 appear fine. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: Artemis3 on April 12, 2019, 04:35:09 PM Been running for a few days now. Firmware seems to be reliable on 13.5TH and 14TH machines, but having problems with most of my 13TH boxes. This is typical: https://puu.sh/DdG80/3d228c9db0.png Any clues on what might be happening or how to get their hashrates back up? 7 of my 10 13TH boxes are doing this, 3 appear fine. For testing purposes, try disabling LPM and ELPM and see if it makes a difference. Do they have something else in common? Same controller/PSU model vs the other 3 that are fine? Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 12, 2019, 09:27:09 PM Here is the same machine without LPM and LPEM enabled.
https://puu.sh/DdNkw/952e6a0432.png (https://puu.sh/DdNkw/952e6a0432.png) Short form: It behaves fine. Tried just enabling LPM mode, and the unit works fine. Been watching it since it rebooted with both LPM and LPEM enabled. Hashrate started out at a respectable 9TH, but within 15 minutes was down to 5TH and dropping. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: Artemis3 on April 12, 2019, 10:37:38 PM Here is the same machine without LPM and LPEM enabled. https://puu.sh/DdNkw/952e6a0432.png Short form: It behaves fine. Tried just enabling LPM mode, and the unit works fine. Been watching it since it rebooted with both LPM and LPEM enabled. Hashrate started out at a respectable 9TH, but within 15 minutes was down to 5TH and dropping. Well then i suggest you leave ELPM disabled with LPM enabled and keep them that way. I'm not very sure if this is pool or controller related, you could try different pools but its probably not worth it. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 13, 2019, 12:40:48 AM Its not pool related - I have over 70 other 13.5TH and 14TH S9s mining against the same pool without issue.
Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: PassThePopcorn on April 13, 2019, 03:46:56 PM Are the controllers different models? If it doesn't like LPEM there might be a setting in enhanced mode that controller / sub model doesn't like.
Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: Artemis3 on April 13, 2019, 07:23:54 PM I'm sorry i didn't catch this earlier. DO NOT upgrade to Bitmain's firmware from 2019, it removes SSH access!!!
Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 14, 2019, 01:02:31 AM I'm sorry i didn't catch this earlier. DO NOT upgrade to Bitmain's firmware from 2019, it removes SSH access!!! Ah... Yeah... Going through the rather time consuming process of resetting via SD-Card now. At least it gives me an excuse to clean each machine. Have all the troubled 13TH Antminers working again. Key was to boost the voltage up a bit per card. Didn't have to do that with the 13.5s or 14s, but it was a regular event on the 13s. Oh, for what its worth: while I had my workbench setup for recovery, I grabbed a stack of "broken" S9 controllers. Wanted to see if they would respond to being reset via the sdhc card. Of (6) tried, all reset without problem. I now have (2) of them running 14TH S9 that burned up their controllers during a snow storm last November. (2) of the others had real problems: one wouldn't bring up the ethernet adapter, the other would not recognize a fan as existing (fan we running, but I'm guessing it couldn't sense the speed. Fan is working fine with another controller.) But still, managed to at least rescue 2, and the other two are maybes. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: Artemis3 on April 17, 2019, 04:57:07 PM This is good to hear, and i have read people "rescuing" boards with failed sensors that otherwise work fine, by using BraiinsOS which has an option to ignore sensors or even fans. Normally you would need to spend more money by getting replacement boards (or repair them), but now you have this choice, as long as you keep away from 2019 firmware that would lock you out from your own miner.
Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: mikeywith on April 17, 2019, 09:48:27 PM Here is an update regarding the S9 March 2019 firmware.
as far as the firmware goes, all of my gears have been running smoothly without an issue, temps are fine, hashrate reported by the pool is good, nothing really to complain about. but as far as the downgrading of the firmware, i have tried every possible solution at my disposal with no luck, not that i "need" to flash another firmware, but i don't like that fact that i have to be stuck with this firmware. it is really annoying. I have contacted Bitmain, they were pretty straight forward and said there is nothing they would about it, in other orders they said "you have to live with it". Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 18, 2019, 01:30:28 AM Here is an update regarding the S9 March 2019 firmware. as far as the firmware goes, all of my gears have been running smoothly without an issue, temps are fine, hashrate reported by the pool is good, nothing really to complain about. but as far as the downgrading of the firmware, i have tried every possible solution at my disposal with no luck, not that i "need" to flash another firmware, but i don't like that fact that i have to be stuck with this firmware. it is really annoying. I have contacted Bitmain, they were pretty straight forward and said there is nothing they would about it, in other orders they said "you have to live with it". Which is not true. You can downgrade via the sdhc card as outlined at the Bitmain site. We have down well over 20 downgrades without a hitch, more almost every day. https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: mikeywith on April 18, 2019, 04:25:34 AM well, they obviously have not offered me that as an "option" , i am aware of this this method, but noway on earth i will waste all that time to flash every s9 , not when the current firmware is running just fine, also given the fact that i have recently disassembled all my gears and cleaned them (in the preparation of summer where temps can go above 40 degrees celsius / 104f ) so i am not going to have to deal with them again now, maybe till winter.
i am also still trying to figure out another method that could be applied on a software level instead, here is the first attempt by @thierry4wd >https://bitcointalk.org/index.php?topic=5131840.0 , no success so far, but let's hope one of us work something out. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: Artemis3 on April 18, 2019, 12:09:53 PM well, they obviously have not offered me that as an "option" , i am aware of this this method, but noway on earth i will waste all that time to flash every s9 , not when the current firmware is running just fine, also given the fact that i have recently disassembled all my gears and cleaned them (in the preparation of summer where temps can go above 40 degrees celsius / 104f ) so i am not going to have to deal with them again now, maybe till winter. i am also still trying to figure out another method that could be applied on a software level instead, here is the first attempt by @thierry4wd >https://bitcointalk.org/index.php?topic=5131840.0 , no success so far, but let's hope one of us work something out. At some point you should be seriously scheduling this. I got an independent report from a miner that reached 78t/w on S9s using BraiinsOS. You have a serious profit incentive to do so... And the longer you take, the more you lose. It is smart not to jump when anything "new" comes, especially if you are committed to so many units. You should have waited patiently for reports from others. When i first heard that S15s did this, i got the feeling they might be tempted to "port back" the same garbage to their older units, and indeed they have... So with 100 S9s how much do you think 78t/w would consume? Why, 1.3PH @ 1014KW of course. I bet you currently are using around 1170KW, does saving 156KW sound good enough for you? Besides if you go BraiinsOS you can downclock and aim to 10T per unit at 800ish W and much lower temperatures, not as nice as 78t/w but a decent 80t/w. How much are you consuming with this 2019 firmware right now? Ok, you can always wait if someone can break it via software alone, or perhaps give them financial incentive to do so (post a bounty in services?) Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: mikeywith on April 18, 2019, 01:14:35 PM @Artemis3
Non of the above factors matters to me as i have totally free power for all my gears, the reason why i never went with BraiinsOS in the first place was the extra time needed to flash all the gears, i also don't know much exactly each s9s consumes with this 2019 firmware, but by looking at the voltage regulators that are installed for some of them its something between 1250w and 1300w more or less. So technically i have no problem with the 2019 firmware (yet), but as far as the "bounty" goes i would be willing to make a good donation to the first person who break this firmware, tho i am not a big fan when it comes to bounties in such cases, as most of us here provide all kind of information and tools for free, but still if you or anyone else for that matter wants a bounty for it - i will be the first to reward them. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: philipma1957 on April 18, 2019, 02:22:42 PM Well s-9's are dirt cheap.
if you do 100 at 13.5 th and use 1250 watts to be a total of 125000 watts or 125 kwatts getting 1350 th on the software you have it may seem good to you. but 150 s9's at 10 th using 810 watts = 1500 th using 121500 watts so you have an extra 150 th which is 0.176 btc a month or 916 usd a month of course you are running 50 more pieces of gear which may have been 150 each with psu or 7500 / 916 or 8.18 month to pay. but you so have 3500 less watts used and that is 1 m20 so you can argue what is best. it is pretty close. I am not sure I want to run 150 s9's vs 100 s9's to earn 916 extra. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 18, 2019, 03:26:39 PM At some point you should be seriously scheduling this. I got an independent report from a miner that reached 78t/w on S9s using BraiinsOS. You have a serious profit incentive to do so... And the longer you take, the more you lose. I've come close to that number three times using the firmware-that-shall-not-be-named (or my post will get deleted, which it likely will anyhow): 550MHz at 8.0V yielded 11,486GH/sec using 905 Watts at the wall for 78.8 J/TH 475MHz at 8.2V yielded 10,300GH/sec using 800 Watts at the wall for 77.7 J/Th 475Mhz at 8.1V yielded 10,100GH/sec using 775 Watts at the wall for 76.7 J/Th - I was shooting for 75J/TH but never made it. Note that only a few of my S9s can pull 550Mhz at 8.0Vs off, most have at least one hash card that simply needs more voltage. 550MHz at 8.2 volts is generally stable on most 14TH machines, with an rare but occasional card needing 8.3V to avoid auto-tuning significant numbers of chips to a lower frequency. 8.3V is pretty commonly needed on my 13.5TH machines, and 8.3-8.5V on my 13TH machines (later batches, not the original early batches). Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: Artemis3 on April 18, 2019, 06:57:05 PM @Artemis3 Non of the above factors matters to me as i have totally free power for all my gears, the reason why i never went with BraiinsOS in the first place was the extra time needed to flash all the gears, i also don't know much exactly each s9s consumes with this 2019 firmware, but by looking at the voltage regulators that are installed for some of them its something between 1250w and 1300w more or less. So technically i have no problem with the 2019 firmware (yet), but as far as the "bounty" goes i would be willing to make a good donation to the first person who break this firmware, tho i am not a big fan when it comes to bounties in such cases, as most of us here provide all kind of information and tools for free, but still if you or anyone else for that matter wants a bounty for it - i will be the first to reward them. Hmm too bad you didn't ask in the Braiins OS thread (https://bitcointalk.org/index.php?topic=5036844.0). It is possible to install it to all of them using a python script of theirs. AND you can go the other way, overclocking, if you don't care about spending more per hash. 16T or so is possible using the 1600w PSUs or a bit more with the 1800w ones. I suggest you officially post the bounty offer (Service demand?) in the Services (https://bitcointalk.org/index.php?board=52.0) area to get things moving... Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: mikeywith on April 18, 2019, 08:46:36 PM [...] ya mathematically it does seem like a good "plan"- if i go with 810w instead of 1250w i will do a lot of room to fill in, but that means new wiring,racks etc, right now i have no near future plans for investing more in mining after that last batch of S9s i got. also the next step would be moving to much more efficient gears, T15/S15 is what i am thinking, this all depends on how much will my S9s worth at that time as well as the price for those T15/S15. AND you can go the other way, overclocking, if you don't care about spending more per hash. 16T or so is possible using the 1600w PSUs or a bit more with the 1800w ones. Not a big fan of overclocking. I suggest you officially post the bounty offer (Service demand?) in the Services (https://bitcointalk.org/index.php?board=52.0) area to get things moving.. does not seem like a bad plan, will do that , not that i really need it, but willing to share it with the community. what would be a good title for the topic in the services section? something that can attract potential programmers who may be capable of breaking this firmware security. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: JohnDon87 on April 22, 2019, 01:44:10 AM Which is not true. You can downgrade via the sdhc card as outlined at the Bitmain site. We have down well over 20 downgrades without a hitch, more almost every day. https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery Hey ccgllc, I just mistakenly installed the new 2019 firmware on my antminer S9. I am also pretty sure I blew out a hash board in doing so as well. I installed the T9+ toolkit and moved the 4 jumper to the right position. Miner still isn't booting off the SD card. I am only running 2 hashboards at enhanced lower power now. I am running 110V power from the wall on a 1850W PSU. How can I troubleshoot the hashboard and how did you boot the S9 miner from the SD card? Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 22, 2019, 03:53:57 AM Hey ccgllc, I just mistakenly installed the new 2019 firmware on my antminer S9. I am also pretty sure I blew out a hash board in doing so as well. I installed the T9+ toolkit and moved the 4 jumper to the right position. Miner still isn't booting off the SD card. I am only running 2 hashboards at enhanced lower power now. I am running 110V power from the wall on a 1850W PSU. How can I troubleshoot the hashboard and how did you boot the S9 miner from the SD card? It doesn't "boot" from the sdhc, it resets itself. After a minute or so, both the red and green like should be blinking together. Once that happens, power down, put the jumper back, reassemble, and it should boot back to the original factory firmware. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: JohnDon87 on April 22, 2019, 05:17:34 AM It doesn't "boot" from the sdhc, it resets itself. After a minute or so, both the red and green like should be blinking together. Once that happens, power down, put the jumper back, reassemble, and it should boot back to the original factory firmware. I got it. Although the instructions weren't thoroughly clear on the bitmain page where to switch the jumer. It took alittle working on it but I finally did it. Thank you! Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on April 22, 2019, 01:33:34 PM I got it. Although the instructions weren't thoroughly clear on the bitmain page where to switch the jumer. It took alittle working on it but I finally did it. Thank you! Too say the least. Took me several back-and-forth e-mails with Bitmain tech support to figure it out. But for others, its Jumper 4 - a 3 pin jumper. Simply change it to cover the other two pins. Then switch it back afterwards. Note: we have been using this as an excuse to clean our machines. Once the hard cards are out, there is room to slide the control card out (if you disconnect the front fan). You can boot the sdhc card without any any cards or fans connected. We simply place a block of wood on top of the case, place the control card on that, plug into a space power supply, and clean the hash cards while the sdhc card is doing its thing. Then reassemble. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: tw0rak on June 07, 2019, 02:17:25 PM Hi guyz,
Im asking for help - Im absolutely NOT new in this but I just cant flash S9 board from the SD. Everything tried and checked multiple times - jumper is in the right possition, both leds - red and green are shining SOLID and never start to blink. Doublechecked if there is that IMG uploaded with Diskimager, tripplechecked the jumper is right... After all this (never starts blinking) I have to disconnect it and there is still the same old (well better to say new) firmware. Any help? EDIT: I have many S9s and just tried the same way at another one with very same results...I do not absolutely know how to continue... Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on June 07, 2019, 04:16:39 PM Not sure why. Suggest using a 16GB or small memory card.
We followed the following steps which worked on over 100 controllers (from repetitive memory): 1) Pull controller from chasis 2) Flip jumper 4 (the one on the outside of the jumper block) 3) Attach power cable from standalone PSU 4) Power up PSU 5) Wait for a few minutes 6) Power down PSU 7) Flip jumper 4 back to normal 8) Disconnect power 9) Reinstall controller Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: tw0rak on June 07, 2019, 06:33:59 PM Im probably doing sth wrong with the SD card - as if there is none in the slot, the board act the same.
wait a second... EDIT: Yes - friday evening - thats the problem. I was using file S2S4S5S7-img.img - and now Ive used files for T9+ and... voila it works. Thanks for your patience! Maybe another one: Is it possible to do with the very latest bitmain firmware for S9? As I made it now at 3 miners w/o problem but this one Im not able to downgrade. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: ccgllc on June 07, 2019, 08:29:56 PM Yes... the latest (anything tagged 2019) firmware is the reason one needs to go through the pain of reflashing via the SDHC port.
Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: maxmad on July 24, 2019, 11:18:09 PM Made 4 flashes through SD card using 2 different SD cards.
Still the board has the same 201905311059 latest firmware. No way to downgrade. i want to use an older firmware to test if i can alive a dead hashing board https://bitcointalk.org/index.php?topic=5034849.0 Jumper flipped, both led are flashing after some seconds but the board has still this latest firmware installed! Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: BitMaxz on July 24, 2019, 11:58:15 PM Can you try to flash it to Braiin OS first through SD card after successfully flash it check the miner in the browser if the interface change to Braiins OS.
If successful then you can flash it back to bitmain image. Then check it again if nothing change and the OS still BraiinsOS it means that your image from bitmain you download for SD card is corrupted you need to download the firmware again without using any 3rd party downloader browser should be enough to download the image/firmware for SD card. Or maybe it's not flashing properly because the terminal has full of dirt/corroded. So check the SD card slot and maybe the terminal is corroded/full of rust that is why it's not flashing properly. If you have Laquer flo thinner you can clean them and resolder the terminal may solve your issue. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: Artemis3 on July 25, 2019, 02:28:20 PM Not sure why. Suggest using a 16GB or small memory card. Because SD, SDHC and SDXC each support different max capacities. If the port is SDHC, putting an SDXC card in there isn't going to work. A sure bet is always keep a small SD card (2gb max). But if someone mentioned 16gb it might mean it is SDHC. I never tried with such big capacity cards (wasteful). There is small chance you got a fake one, which are usually printed with large capacities (but are much smaller in reality). Best thing about low capacities is that nobody bothers faking them... To OP: Try booting BraiinsOS, (same jp4 jumper) if it boots, try installing it into the nand using its web ui. Move back jumper and see what happens... If it still boots Bitmain's firmware, then the nand my be damaged. Unlike Bitmain's, you don't have to install Braiins OS into the nand to use it, just leave it with the smallest (cheapest) SD card you can find and let it always boot from sd. I don't think a new controller is worth buying when any cheapo 1gb microsd card fixes it. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: maxmad on July 26, 2019, 12:37:57 AM OK Braiin OS installed to NAND. ( Using 16GB card, with 8GB there was an error "firmware.tar.gz" is missing )
Seems that the missing hashboard appeared and hashing. However in Braiin OS there is no temperature measurement! https://i.ibb.co/qWGfPbL/braiinos.png (https://i.ibb.co/qWGfPbL/braiinos.png) and after a while 2 hashing boards stop hashing Code: Thu Jul 25 19:59:11 2019 daemon.err cgminer[6079]: [2019-07-25 19:59:11.130] Accepted 06cba9a4 Diff 9.64K/4327 BC5 0 Braiin OS seems very powerful firmware but missing temperatures sensors is very dangerous. So i tried to install 201711171757 bitmain firmware from official page with no luck https://i.ibb.co/RNZsXF8/error.png (https://i.ibb.co/RNZsXF8/error.png) Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: Artemis3 on July 29, 2019, 01:31:20 PM OK Braiin OS installed to NAND. ( Using 16GB card, with 8GB there was an error "firmware.tar.gz" is missing ) Seems that the missing hashboard appeared and hashing. However in Braiin OS there is no temperature measurement! ... Braiin OS seems very powerful firmware but missing temperatures sensors is very dangerous. So i tried to install 201711171757 bitmain firmware from official page with no luck Well you can also manually control the fan speeds. If you know it never got to dangerous temperatures with factory, it won't with Braiins OS unless you overclock it. It seems to be unable to detect the sensors but that's not so strange as you may think. It would be fine if you could get temperatures from one of the boards, then put that in the middle (which is the worst position). You can try factory from 2017 and 2018 if you think it makes a difference. But yes, factory loves to disable a board when it can't read its sensors, something bOS can override as you did see. Sensors failing but hash chips actually ok is not rare. If you are somehow still scared with bOS go the other route: Downclock. Something resembling 8.1v 500mhz does wonders. You could try 8.5v 600mhz or so, just make sure actual and ideal clock speed match or are very close, then keep lowering that voltage and when the values differ too much go back to the previous value. Downclocking is never dangerous, chips run cooler. And don't mind the suggested values, lower those voltages always until you find the sweet spot. I mean a downclocked board is better than no board, but its your choice... Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: maxmad on July 29, 2019, 06:30:03 PM This is a good thought.
However, if something will block the airflow, ie dust or even a fan failure, this will be catastrophic. The strange part is that bOS detects the sensors: Code: Mon Jul 29 15:17:37 2019 daemon.err cgminer[6644]: [2019-07-29 15:17:37.036] AUTOMATIC fan control, target temperature 75 degrees (hot is 90 deg, dangerous is 95 deg) To bypass the error while trying to flash to factory, i used the SD recovery method. This time the flash was successful to NAND and S9 boot to factory OS. Then i installed the 201711171757 and all three boards were working again! Seems that 201711171757 is really a saver. I tested to flash to latest 2018 firmware 201812051512 with success and all boards properly worked. Including of temp sensors! https://i.ibb.co/4J4VVq3/temp-ok-2017.png (https://i.ibb.co/4J4VVq3/temp-ok-2017.png) Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: Artemis3 on July 30, 2019, 01:38:40 AM To bypass the error while trying to flash to factory, i used the SD recovery method. This time the flash was successful to NAND and S9 boot to factory OS. Then i installed the 201711171757 and all three boards were working again! Seems that 201711171757 is really a saver. I tested to flash to latest 2018 firmware 201812051512 with success and all boards properly worked. Including of temp sensors! I suggest you stay there then, that's asicboost enabled while still not locking you out of your miner. Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: AlecMe on September 19, 2019, 08:22:43 AM Hi all,
Anyone knows what could be the problem that can cause this: "Chain[5] Chip[62] junction temperature=136" Everything else at the end of the log seem to look ok: "Done check_asic_reg Chain[5] Chip[244] pcb temperature=62 Chain[5] Chip[62] junction temperature=136 Special fix Chain[5] Chip[62] middle Temp = 77 Done read temp on Chain[5] Chain[6] Chip[244] pcb temperature=65 Chain[6] Chip[62] junction temperature=71 Special fix Chain[6] Chip[62] middle Temp = 80 Done read temp on Chain[6] Chain[7] Chip[244] pcb temperature=62 Chain[7] Chip[62] junction temperature=66 Special fix Chain[7] Chip[62] middle Temp = 77 Done read temp on Chain[7] Max pcb temp : 65 Set fixed fan speed=80 FAN PWM: 80 read_temp_func Done! CRC error counter=0" Title: Re: Antminer S9 March 4th, 2019 firmware experience? Post by: mettalmag on October 16, 2019, 09:31:06 PM can you try this method > https://bitcointalk.org/index.php?topic=5128618.msg50519867#msg50519867 4 out of 35 machines are at 0 hashratei had a batch that did not allow me to change the firmware, it also refused ssh connection , it's not exactly the same issue, but give it a shot. I have no physical access right now but I will try that method and also thinking to try third party OS maybe |
