|
Title: Redfury Low Hashrate Post by: Amalfion on March 12, 2014, 07:17:49 PM I just receved new BitFury Red Fury - USB Bitcoin - Asic Miner 2.2+ GH/s (2.7gh overclocked) and using it with bfgminer. Everything is OK, no problém with installation (followed some Youtube instructional video) but it gives only 100-120 Mh/s (tried on different pools). Anybody able to advice ?
Title: Re: Redfury Low Hashrate Post by: Fiyasko on March 12, 2014, 07:21:19 PM I just receved new BitFury Red Fury - USB Bitcoin - Asic Miner 2.2+ GH/s (2.7gh overclocked) and using it with bfgminer. Everything is OK, no problém with installation (followed some Youtube instructional video) but it gives only 100-120 Mh/s (tried on different pools). Anybody able to advice ? Hello there!, I own 7 RedFury USB miners (i can't get them to 2.7gh/s but mine run at 2.3-2.56)Are you reading what the Pool is saying that you have? (it will take awhile to get an accurate speed reading from the pool) Use the Third number in BFGminer's hashrate speed to determine how fast the pool sees you hashing at ----Here are 3 of mine--- BPM 0: | 2.56/ 2.56/ 2.40Gh/s | A:24407 R:180+ 8(.76%) HW: 5478/5.3% BPM 1: | 2.31/ 2.31/ 2.20Gh/s | A:22419 R:217+ 4(.98%) HW: 3567/3.8% BPM 2: | 2.45/ 2.44/ 2.32Gh/s | A:23627 R:179+ 7(.78%) HW: 4176/4.2% ---------------------------- You want to look at the emboldend number Goodluck! Title: Re: Redfury Low Hashrate Post by: Amalfion on March 12, 2014, 07:25:05 PM I just receved new BitFury Red Fury - USB Bitcoin - Asic Miner 2.2+ GH/s (2.7gh overclocked) and using it with bfgminer. Everything is OK, no problém with installation (followed some Youtube instructional video) but it gives only 100-120 Mh/s (tried on different pools). Anybody able to advice ? Hello there!, I own 7 RedFury USB miners (i can't get them to 2.7gh/s but mine run at 2.3-2.56)Are you reading what the Pool is saying that you have? (it will take awhile to get an accurate speed reading from the pool) Use the Third number in BFGminer's hashrate speed to determine how fast the pool sees you hashing at ----Here are 3 of mine--- BPM 0: | 2.56/ 2.56/ 2.40Gh/s | A:24407 R:180+ 8(.76%) HW: 5478/5.3% BPM 1: | 2.31/ 2.31/ 2.20Gh/s | A:22419 R:217+ 4(.98%) HW: 3567/3.8% BPM 2: | 2.45/ 2.44/ 2.32Gh/s | A:23627 R:179+ 7(.78%) HW: 4176/4.2% ---------------------------- You want to look at the emboldend number Goodluck! All 3 numbers are similar - about 100-120 MHs... So I need better connectivity ?? Title: Re: Redfury Low Hashrate Post by: Amalfion on March 12, 2014, 07:36:08 PM Do I need better up or download ?
Title: Re: Redfury Low Hashrate Post by: Fiyasko on March 12, 2014, 07:53:21 PM Do I need better up or download ? Uhhm pff.. BFGminer reports that it's only running at 100-120mh/s?! What the heck?It's probobly not your connection, bitcoin uses close to nothing in terms of internet bandwidth usage Have you tried differant versions of BFG miner? Title: Re: Redfury Low Hashrate Post by: Amalfion on March 12, 2014, 08:08:23 PM Using version 3.2.0
OCL 0: 116.5/115.4/121.6Mh/s A:6 R:0+0 HW:0/none Title: Re: Redfury Low Hashrate Post by: Amalfion on March 12, 2014, 08:18:18 PM The same problem with version 3.5.0 ???
Title: Re: Redfury Low Hashrate Post by: Fiyasko on March 13, 2014, 02:12:10 PM "OCL" is OpenComputingLanguage, Thats your GPU not your RedFury miner
Title: Re: Redfury Low Hashrate Post by: Amalfion on March 13, 2014, 02:37:07 PM Ah, OK... But how to "activate" bitfury ? Driver was installed OK, when I try to add new device via M and + nothing is found... :-(
I use this command: bfgminer.exe -S "BF1:all" -o stratum.btcguild.com:3333 -O (myusername) Title: Re: Redfury Low Hashrate Post by: Fiyasko on March 13, 2014, 06:17:03 PM Ah, OK... But how to "activate" bitfury ? Driver was installed OK, when I try to add new device via M and + nothing is found... :-( First, try running BFG miner without any arguments, see if it picks up your device, If you installed the driver correctly, you will see your device popupI use this command: bfgminer.exe -S "BF1:all" -o stratum.btcguild.com:3333 -O (myusername) I use "bfgminer.exe -S opencl:auto" when running my devices and my gpu Title: Re: Redfury Low Hashrate Post by: Amalfion on March 13, 2014, 07:21:48 PM I tried without any arg and it starts to ask about pool server and then only OCL available again... is there any .exe file with bitfury enabled available to download ??
Title: Re: Redfury Low Hashrate Post by: HellDiverUK on March 14, 2014, 03:23:05 PM is there any .exe file with bitfury enabled available to download ?? All of them. I suggest you read the README.ASIC file - I'm confident you'll find the answer you need in there. Title: Re: Redfury Low Hashrate Post by: Amalfion on March 15, 2014, 12:11:00 AM Finally started to work under cgminer 4.1.0 :-)
Title: Re: Redfury Low Hashrate Post by: -ck on March 15, 2014, 12:57:07 AM Finally started to work under cgminer 4.1.0 :-) (-: |