|
Title: My First Mining Rig Post by: Cosemose on May 14, 2019, 02:40:59 PM Hello fellow miners!
i pretty new to this i have done some research tho! My specs are ASrock H110 Pro BTC+ Intel Celeron G3930 Evga Supernova G2 1300W Msi Geforce GTX 1070 Geforce GTX 970 To my GTX970 i have PCIE Up-Riser and i have a 6pin connected to the riser and its connected to a VGA port in the PSU And the 1070 connected directly to the motherboard. My computer can only connect/recognize one card at the time even if they are both connected I also have one Molex connected to one of the two PCIE slots on the motherboard i dont now if its all connected at the right way therefor i will upload 2 pictures of my rigg. The molex cable connects to the PSU thru the Prefix slot. https://imgur.com/a/pwHtXLg https://imgur.com/a/j0aa0Ji Title: Re: My First Mining Rig Post by: PassThePopcorn on May 14, 2019, 02:49:16 PM Hello fellow miners! This should probably go into this area https://bitcointalk.org/index.php?board=160.0i pretty new to this i have done some research tho! My specs are ASrock H110 Pro BTC+ Intel Celeron G3930 Evga Supernova G2 1300W Msi Geforce GTX 1070 Geforce GTX 970 To my GTX970 i have PCIE Up-Riser and i have a 6pin connected to the riser and its connected to a VGA port in the PSU And the 1070 connected directly to the motherboard. My computer can only connect/recognize one card at the time even if they are both connected I also have one Molex connected to one of the two PCIE slots on the motherboard i dont now if its all connected at the right way therefor i will upload 2 pictures of my rigg. The molex cable connects to the PSU thru the Prefix slot. https://imgur.com/a/pwHtXLg https://imgur.com/a/j0aa0Ji You can use the move button at the bottom left of the screen. As for the question, I'm not 100% sure but aren't there driver compatibility issues with the 9 v 10 series where you can't run both at the same time? Title: Re: My First Mining Rig Post by: Cosemose on May 14, 2019, 02:53:50 PM Hello fellow miners! This should probably go into this area https://bitcointalk.org/index.php?board=160.0i pretty new to this i have done some research tho! My specs are ASrock H110 Pro BTC+ Intel Celeron G3930 Evga Supernova G2 1300W Msi Geforce GTX 1070 Geforce GTX 970 To my GTX970 i have PCIE Up-Riser and i have a 6pin connected to the riser and its connected to a VGA port in the PSU And the 1070 connected directly to the motherboard. My computer can only connect/recognize one card at the time even if they are both connected I also have one Molex connected to one of the two PCIE slots on the motherboard i dont now if its all connected at the right way therefor i will upload 2 pictures of my rigg. The molex cable connects to the PSU thru the Prefix slot. https://imgur.com/a/pwHtXLg https://imgur.com/a/j0aa0Ji You can use the move button at the bottom left of the screen. As for the question, I'm not 100% sure but aren't there driver compatibility issues with the 9 v 10 series where you can't run both at the same time? Okey im trying to install the 970 thru device manager now. :) Title: Re: My First Mining Rig Post by: 0xcosmos on May 22, 2019, 03:30:12 PM in bios set the x16 and pcie link speed to gen1 and then try again
it should detect both of your gpus then Title: Re: My First Mining Rig Post by: Cosemose on May 30, 2019, 08:59:30 AM in bios set the x16 and pcie link speed to gen1 and then try again it should detect both of your gpus then Set the X16 in the bios? :P Title: Re: My First Mining Rig Post by: 0xcosmos on May 30, 2019, 09:54:46 AM in bios set the x16 and pcie link speed to gen1 and then try again it should detect both of your gpus then Set the X16 in the bios? :P yeah don't you have this option in your bios? :P http://i64.tinypic.com/xck5l4.jpg |
