Title: Cannot build OpenCL program for GPU 0 Post by: Aghilbuddy on May 30, 2019, 06:19:36 PM HI
I have a Dell inspiron with Core I7 and AMD Radeon R7 M440. I have set the virtual device memory to 16 GB. What else i can do to solve the issue. ╔════════════════════════════════════════════════════════════════╗ ║ Claymore's Dual GPU Miner - v14.6 ║ ║ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ║ ║ Supercharged Edition ║ ╚════════════════════════════════════════════════════════════════╝ ETH: 1 pool is specified Main Ethereum pool is asia1.ethpool.org:3333 DCR: 0 pool is specified At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU, "z" to find best -dcri values Press "y" to set Compute Mode and disable CrossFire in AMD drivers for all cards OpenCL initializing... AMD Cards available: 1 GPU #0: Iceland (AMD Radeon R7 M440), 4096 MB available, 6 compute units (pci bus 1:0:0) POOL/SOLO version Cannot build OpenCL program for GPU 0 GPU #0: set -etha as 1 (ETH algo for slow cards) No NVIDIA CUDA GPUs detected. Total cards: 1 ETH: Stratum - connecting to 'asia1.ethpool.org' <172.65.215.159> port 3333 (unsecure) ETH: Stratum - Connected (asia1.ethpool.org:3333) (unsecure) No pool specified for Decred! Ethereum-only mining mode is enabled ETHEREUM-ONLY MINING MODE ENABLED (-mode 1) ETH: eth-proxy stratum mode Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333 ETH: Authorized Setting DAG epoch #262... ETH: 05/30/19-23:45:33 - New job from asia1.ethpool.org:3333 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s Setting DAG epoch #262 for GPU0 Create GPU buffer for GPU0 GPU0, OpenCL error -48 (0) - cannot create DAG on GPU ETH: 05/30/19-23:45:37 - New job from asia1.ethpool.org:3333 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s GPU 0 failed Setting DAG epoch #262 for GPU0 GPU0, OpenCL error -48 (0) - cannot create DAG on GPU ETH: 05/30/19-23:45:41 - New job from asia1.ethpool.org:3333 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s GPU 0 failed ETH: 05/30/19-23:45:42 - New job from asia1.ethpool.org:3333 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s ETH: 05/30/19-23:45:43 - New job from asia1.ethpool.org:3333 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s ETH: 05/30/19-23:45:44 - New job from asia1.ethpool.org:3333 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s ETH: 05/30/19-23:45:49 - New job from asia1.ethpool.org:3333 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s ETH: 05/30/19-23:45:50 - New job from asia1.ethpool.org:3333 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s ETH: 05/30/19-23:45:54 - New job from asia1.ethpool.org:3333 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s GPU0 t=0C fan=0% WATCHDOG: GPU error, you need to restart miner :( Restarting OK, exit... Title: Re: Cannot build OpenCL program for GPU 0 Post by: Avirunes on May 30, 2019, 08:10:07 PM I think Beginners & Help section is not right section for this post. I would suggest to move it to https://bitcointalk.org/index.php?board=160.0 (Mining-Altcoins) for quick and accurate answers to your problem.
Discussion about same issue: https://github.com/nanopool/Claymore-Dual-Miner/issues/29 Title: Re: Cannot build OpenCL program for GPU 0 Post by: 0xcosmos on May 31, 2019, 07:03:36 AM nvidia uses opencl
that is why it is failing to build copy and paste your bat file content as it is here Title: Re: Cannot build OpenCL program for GPU 0 Post by: serhanni on May 31, 2019, 09:09:53 PM Make sure you have installed latest amd drivers suitable for your gpu and try with removing
Code: export GPU_FORCE_64BIT_PTR=0 Title: Re: Cannot build OpenCL program for GPU 0 Post by: Aghilbuddy on June 05, 2019, 05:52:36 AM i ran the BAT file removing the code, Still its showing the same error
Title: Re: Cannot build OpenCL program for GPU 0 Post by: Nonpossible on December 03, 2019, 02:53:06 PM A couple of things to try.
1. increase paging file from 16gb to 20gb. The recommended 16Gb almost never works for any of my rigs. Try increasing 4Gb at a time up to 32 and see if any of those values work. 2. You may just need to reinstall and re-patch drivers. This may not be applicable to your specific GPU, but my AMD RX 580s every now and then will need the blockchain drivers reinstalled. |