|
Title: Powering the Z11 with two PSU's Post by: kozarecpeter on August 02, 2019, 12:53:49 PM Hello,
I have Antminer Z11 powered by apw3+, I bought an apw7 and would like to use both to power the Z11. Is it possible to do this? I thought of something like powering two boards with an apw7 and one with apw3+ for example, but I m not sure about that. I know that the apw3+ alone is suitable, but i would like to overclock the Z11. Thanks. Title: Re: Powering the Z11 with two PSU's Post by: badbart on August 03, 2019, 02:59:41 AM Hello, I have Antminer Z11 powered by apw3+, I bought an apw7 and would like to use both to power the Z11. Is it possible to do this? I thought of something like powering two boards with an apw7 and one with apw3+ for example, but I m not sure about that. I know that the apw3+ alone is suitable, but i would like to overclock the Z11. Thanks. Just do not power the same boards with the two different psus. I run my z11s around 140 anything higher they shut off, I assume I need more power to over clock higher. I'm running it on 240 so its pulling over 1,600 watts. I think if you run it very high it uses a lot more juice per hash. |