|
Title: old ANTMINER D3 problem, no IP, no LEDs Post by: 52edcs10ma on August 20, 2019, 10:50:54 AM
I am trying to bring back to life ANTMINER D3 but it seems to be completely dead :( I see only the lights next to LAN socket. Both leds (red fault and green normal are constantly off. Fans are working. DHCP Server does not give any IP to the machine. Already tested with IP scanner. Already tried to reset to factory setting but totally nothing happened after pressing the reset button. Waited for 5 minutes and than pressed the button for 10 seconds. Also, I performed these steps: https://support.bitmain.com/hc/en-us/articles/360006020594-D3-Control-Board-Program-Recovery but totally nothing changed. [/li][/list] Short video here: https://imgur.com/aRpgYhW Have you got an idea? p.s. The price of X11 algorithm mining coins will grow up soon, so I want to be prepared for the boom. :) :) Thanks Title: Re: old ANTMINER D3 problem, no IP, no LEDs Post by: vincl on August 20, 2019, 03:09:28 PM D3 is a brick, even with booming X11 coins. even with free electricity i would plugin other miners rather the D3.
i wouldnt waste time on the machine Title: Re: old ANTMINER D3 problem, no IP, no LEDs Post by: mihacrypto on August 29, 2019, 07:08:48 PM I wonder what should happen to the boom? if at this time, produce cars at a speed of 660 G h\s. can I know about a few things? you need to repair the control Board miner is likely alive
|
