|
Title: Static Red light by SSH (Help) Post by: Texnoz on August 27, 2019, 09:43:03 AM Is there a command to put static red light by SSH on Antminer S9/s9i ? I've been struggling to figure out.
Title: Re: Static Red light by SSH (Help) Post by: BitMaxz on August 27, 2019, 09:15:41 PM What do you mean by static red light?
Is it a red light from the hashboard? If you are using 2019 firmware you don't have access on SSH unless if you are using below 2019 firmware. Title: Re: Static Red light by SSH (Help) Post by: Artemis3 on August 27, 2019, 09:41:25 PM Is there a command to put static red light by SSH on Antminer S9/s9i ? I've been struggling to figure out. You can control the LED lights (https://docs.braiins-os.org/#miner-signalization-led) with BraiinsOS (https://braiins-os.org/), or force them to blink or not to identify units. Identifying a miner in a farm The local miner utility can also be used to identify a particular device by enabling aggressive blinking of the red LED: $ miner fault_light on Similarly to disable the LED run: $ miner fault_light off Title: Re: Static Red light by SSH (Help) Post by: Texnoz on August 28, 2019, 12:19:25 PM Yes, ofcourse with access trough SSH - older firmware.
And also without having to install braiins. Static "Fault" Led light is what I was thinking if there was any command for this. |