Title: Chinese Power supply - Can i source a small replacement fan? Post by: Dragonizer on October 06, 2019, 10:50:29 AM Hi All
One of my PSUs has stopped running, turning off after 10 mins due to overtemp. I just checked it and the problem is the fan is not running? It only a small fan built into the input end. Are replacements available for these? What size/rating would i need?? Pics Attached. https://imgur.com/a/wVEUBia https://imgur.com/a/KoNpq1s Cheers Title: Re: Chinese Power supply - Can i source a small replacement fan? Post by: HagssFIN on October 06, 2019, 11:14:52 AM If you carefully disassemble the cooling fan,
you should be able to see it's technical specs sticker. And then you can also take a measurement tape and measure it's dimensions. Title: Re: Chinese Power supply - Can i source a small replacement fan? Post by: Dragonizer on October 06, 2019, 11:39:33 AM If you carefully disassemble the cooling fan, you should be able to see it's technical specs sticker. And then you can also take a measurement tape and measure it's dimensions. Thanks, will have a go later. EDIT, it's a Foxconn 40mmx40mmx28mm Its a 4 wire but only he re and black are used. I presume Ebay would be my best place to look? Title: Re: Chinese Power supply - Can i source a small replacement fan? Post by: DaveF on October 06, 2019, 12:49:20 PM Depends on where you are. And how fast you want it.
In the US NewEgg or Amazon might has them. https://www.amazon.com/Protechnic-Fan-12V-28mm-MGA4012YB-028/dp/B010Q29GRE Microcenter if there is one near you might have something. Other parts of the world will vary. A local PC repair place also might have something. -Dave Title: Re: Chinese Power supply - Can i source a small replacement fan? Post by: Dragonizer on October 06, 2019, 01:04:40 PM I'm based in the UK and have gone for this with a slightly higher CFM.
https://www.ebay.co.uk/itm/1pc-DELTA-FFB0412SHN-40x40x28mm-40mm-4028-DC-12V-0-6A-Cooling-Fan-3pin-Connector/321111399505?hash=item4ac3bb1c51:g:jq4AAMXQQQhRcq4u Luckily i checked here as i was going to bin it. Thanks for the advice. |