|
Title: Help: Innosilicon T2TH+ 37TH Not mining Post by: falconlogs on December 06, 2019, 12:52:18 PM Hello Everyone,
I purchased Innosilicon T2TH+ 37TH but I can't seem to make it work. I can't seem to find logs or any sort of verbose detail than will guide me on troubleshooting. Connecting via SSH seems to not work. Most common passwords of root are not applicable ( blacksheepwall, innot1t2 or t1t2t3a5 ) I tried using slushpool and f2pool. I already read the manual at: https://www.innosilicon.com.cn/download/T2T-32T-BTC-Master-Manual-en.pdf I also upgraded the firmware to: t2th+_soc_20191113_023916 build date: 13th of November 2019 02:39 AM Here are the screenshots: Overview --> https://prnt.sc/q741vg Pool config -->> https://prntscr.com/q7431w Anyone have an advice what do to? Or how to troubleshoot / verify? Thanks. Title: Re: Help: Innosilicon T2TH+ 37TH Not mining Post by: Biffa on December 06, 2019, 01:32:54 PM To see the logs, just append /logs to the IP address of the miner in your web browser.
So for that miner it would be http://172.16.8.152/logs Title: Re: Help: Innosilicon T2TH+ 37TH Not mining Post by: philipma1957 on December 06, 2019, 04:47:57 PM your ip is. 172.16.8.152
your gateway is 172.16.0.10 usually the .8. should match the .0. you are doing. dhcp so i am not sure why you don’t match gateway. Title: Re: Help: Innosilicon T2TH+ 37TH Not mining Post by: falconlogs on December 07, 2019, 10:42:48 AM To see the logs, just append /logs to the IP address of the miner in your web browser. So for that miner it would be http://172.16.8.152/logs Thanks for this. your ip is. 172.16.8.152 your gateway is 172.16.0.10 usually the .8. should match the .0. you are doing. dhcp so i am not sure why you don’t match gateway. Thank you for the reply. So far this can connect to the internet. Perhaps this have 255.255.0.0 subnet. Anyhow, Problem with Innosilicon Miner: screenshot --> https://prntscr.com/q7hjkw Even the default pool can't do the mining. I tried antpool, f2pool and slushpool all the same issues. tried hardware factory reset. software factory reset.. still same issues. It always says Code: Dec 07 10:26:04 InnoMiner cgminer[11714]: Timed out waiting for response in initiate_stratum Anyone have an advice? how to troubleshoot? Thanks. Title: Re: Help: Innosilicon T2TH+ 37TH Not mining Post by: BitMaxz on December 07, 2019, 07:44:36 PM Try to ping the pool server not just ping use the psping to ping the pool with port.
Check this guide below replace the viaBTC with your pool. Here's the guide below. - First download the PSping you can find it from here https://docs.microsoft.com/en-us/sysinternals/downloads/psping - Now, extract the file. - Open CMD - Type this command below. Code: cd "Folder path of psping" Sample below. Code: cd C:\Users\Admin\Downloads\PSTools - Now perform this command below. Code: psping btc.viabtc.com:3333 Now the ping will show something like 213ms this ping is high and for me, it is not recommended ping it will gives me high rejected share. Here's the result of mine. Code: TCP connect to 47.89.133.160:3333: Other viabtc pool servers for BTC below. - stratum+tcp://btc.viabtc.com:25 - stratum+tcp://btc.viabtc.com:443 You can ping them and test the ping. Here's my other result on another pool (sg.kano.is:3333) as a sample. Code: TCP connect to 45.32.116.44:3333: This ping with an average of 80ms is good ping so this one is a good pool server and recommended to use. Try to other pool you can find more pool from this link https://miningpoolstats.stream/bitcoin. If no connection then try to use other pool server. Check these list below. Code: URL: Source: https://blog.f2pool.com/en/mining-tutorial-en/btc_en More from here https://blog.f2pool.com/en/help/faq-en/miner-configuration-en Title: Re: Help: Innosilicon T2TH+ 37TH Not mining Post by: minefarmbuy on December 09, 2019, 04:54:26 AM You can see the unit from your network's UI? Had an issue where my router wasn't assigning IP automatically had to restore factory and assign manually from the unit.
|