Bitcoin Forum

Bitcoin => Mining support => Topic started by: Miner42069 on January 14, 2020, 05:06:01 PM



Title: INNOSILICON T3-50T BTC Miner Fan Speed
Post by: Miner42069 on January 14, 2020, 05:06:01 PM
I was wondering if anyone knows how to cap the fan speed of the miner because once it gets above 70% it is very loud.


Title: Re: INNOSILICON T3-50T BTC Miner Fan Speed
Post by: philipma1957 on January 14, 2020, 06:21:40 PM
I was wondering if anyone knows how to cap the fan speed of the miner because once it gets above 70% it is very loud.

earplugs.


seriously  though the gear pulls a  lot of power and the fans are loud.

Capping the speed is very difficult and likely to damage the gear.

I only purchased 1 unit  and for the most part it runs the fans at high speeds with loud noise.


Title: Re: INNOSILICON T3-50T BTC Miner Fan Speed
Post by: BitMaxz on January 14, 2020, 09:16:30 PM
If you have access to SSH you can reduce the fan speed but I think for latest innosilicon firmware are all SSH disabled so you can't reduce the fan speed.

I heard that some miners use an adapter called NA-FC1 to reduce the amp flow from the PSU to reduce the speed of the fan but it seems it won't work according to some response from other thread  (https://bitcointalk.org/index.php?topic=5163184.20).

Try to access the SSH with this passwords below
Code:
Innosilicon	root	innot1t2
Innosilicon root t1t2t3a5
Innosilicon root blacksheepwall

Use this command to manually set the fan speed.
Code:
"fanspeed":"80"
"automatic":"manual"

The "80" is the percentage of your fan speed. but if the SSH password above doesn't work better to move on because reducing fan speed will increase temp that can damaged chips as philipma1957  said.