Title: Playing around with a whatsminer m10 Post by: philipma1957 on January 28, 2020, 10:28:25 PM I have a m10 with a dead board.
4352.42kwatt hours at 5:26 pm So I will try to build a quiet m10 space heater. Numbers above show kwatts at 5:26 pm I set miner to low speed to make it quiet and the fans are at 1900 rpm so it passes quiet test. The center board was bad I removed it completely. It is doing about 13,800 gh or 13.8 th I will check power use in an hour at 6:26 pm this still needs 240 volts which is easy for me to provide. I am feeding it 239 volts at the moment. I simply removed the center board completely an set gear to low. zero cost fast and easy to do I am hoping to get 60 watts a th for this unit on low. Title: Re: Playing around with a whatsminer m10 Post by: philipma1957 on January 28, 2020, 10:55:16 PM spacer
4352.46 at 5:26 pm 4352.86 at 5:56 pm doing 14075gh or 14.075th ½ hour reading can be off by a bit. so .4 x 2 = 800 watts draw to do 14.075 th that is 800/14.075 = 56.838 watts a th not bad so 4352.46 5:26 4354.15 7:26 1.69 kwatts in 2 hours or 845 watts an hour 14.072 th so 845/ 14.072= 60.04 watts a th 1 th earns 0.1475 cents a day so this making 2.07 a day to burns 21 kwatts which mean it is about break even at 9.9 cent power 2 boards on low only mod is pull the dead center board. room is warm 85f Title: Re: Playing around with a whatsminer m10 Post by: NotFuzzyWarm on January 29, 2020, 01:47:29 AM Not bad at all! Gives me some ideas for what to do with the one that likes to drop a board - same one every time and yes is the middle one as well - every now and then..
Title: Re: Playing around with a whatsminer m10 Post by: philipma1957 on January 29, 2020, 03:32:04 AM fans are under 3000 say 2000-2500 room is warm 86f
5 hour read 0n mmpool 4356.72 10:26 4352.46 5:26 4.26 kw or 852 watts an hour so 852/14.032 = 60.7 watts a th this was on mmpool.org which is sometimes a lower hash then viabtc pool due to lack of asic boost on mmpool will run on viabtc overnight. 4365.98 kwatts at 9:18am 10 hours later 4358.24 kwatts at 12:18am 4357.40 kwatts at 11:18pm set to viabtc doing 14,239 which is higher then mmpool due to asic boost. that is 840 watts 840/14.238 = 58.99 watts a th. one hour test. 8.48 kwatts in 10 hours so 848/14.080 = 60.27 watts per th about the same as mmpool numbers for 50 hours. room is 87f or 30.5c fans are 3500 and 3600 so some noise but not killer. This will be moving up to Clifton warehouse later today. Hey completely off topic , but 10k a coin by feb 1st! My Fingers are crossed and hoping for this. Edit: we topped 10k on Feb 8th So I guess I was close enough with my Feb 1 guess. I will now predict 11k by March 1 ;) |