|
Title: D3 flashing TO L3, L3 BOARD INSIDE D3 Post by: blknminerz on February 07, 2020, 11:38:35 AM Hi guys,
I don't know if you noticed that there is an L3 board inside thf D3 but I just noticed it. IS IT POSSIBLE TO FLASH A D3 Into an L3? Does anybody try it? I'll out right now Title: Re: D3 flashing TO L3, L3 BOARD INSIDE D3 Post by: DaveF on February 07, 2020, 02:31:58 PM According to Bitmain yes it's the same board for the L3,L3+,L3++,D3,A3,X3
https://shop.bitmain.com/product/detail?pid=000201807311735163200cr1JTsS068C So all you would need to do is flash the firmware you need. You may or may not need to use the SD card method depending on the revision of the firmware that is already on it. There are guides on the Bitmain site. -Dave Title: Re: D3 flashing TO L3, L3 BOARD INSIDE D3 Post by: sxemini on February 07, 2020, 03:22:46 PM According to Bitmain yes it's the same board for the L3,L3+,L3++,D3,A3,X3 https://shop.bitmain.com/product/detail?pid=000201807311735163200cr1JTsS068C So all you would need to do is flash the firmware you need. You may or may not need to use the SD card method depending on the revision of the firmware that is already on it. There are guides on the Bitmain site. -Dave ::) oh dude oh dude XD Yes this boards have the same Controller board and thats it. The asic boards are different. Because ASIC, the name say it XD So no you canīt make an D3 to a L3. Title: Re: D3 flashing TO L3, L3 BOARD INSIDE D3 Post by: DaveF on February 07, 2020, 03:45:39 PM According to Bitmain yes it's the same board for the L3,L3+,L3++,D3,A3,X3 https://shop.bitmain.com/product/detail?pid=000201807311735163200cr1JTsS068C So all you would need to do is flash the firmware you need. You may or may not need to use the SD card method depending on the revision of the firmware that is already on it. There are guides on the Bitmain site. -Dave ::) oh dude oh dude XD Yes this boards have the same Controller board and thats it. The asic boards are different. Because ASIC, the name say it XD So no you canīt make an D3 to a L3. You are correct. I misread it. I was thinking he was asking about swapping a dead control board for a good one between units. Something I have had to do a lot on Bitmain gear :( This is what happens when you read & post on mobile while standing on a train. -Dave Title: Re: D3 flashing TO L3, L3 BOARD INSIDE D3 Post by: sxemini on February 08, 2020, 02:22:42 PM According to Bitmain yes it's the same board for the L3,L3+,L3++,D3,A3,X3 https://shop.bitmain.com/product/detail?pid=000201807311735163200cr1JTsS068C So all you would need to do is flash the firmware you need. You may or may not need to use the SD card method depending on the revision of the firmware that is already on it. There are guides on the Bitmain site. -Dave ::) oh dude oh dude XD Yes this boards have the same Controller board and thats it. The asic boards are different. Because ASIC, the name say it XD So no you canīt make an D3 to a L3. You are correct. I misread it. I was thinking he was asking about swapping a dead control board for a good one between units. Something I have had to do a lot on Bitmain gear :( This is what happens when you read & post on mobile while standing on a train. -Dave :D yes thats true Title: Re: D3 flashing TO L3, L3 BOARD INSIDE D3 Post by: dbs00 on June 19, 2021, 04:32:27 PM so its not doable to flash a d3 with l3 firmware?
anyone tried it? |