|
Title: Does anyone have a schematic or pinout for the T9+ control board? Post by: SukiKrieg on March 08, 2020, 05:55:44 PM Or know of where I can find it. Used on some Bitcoin miners as well as Bytom and Etherium miners by Bitmain. Please help
Title: Re: Does anyone have a schematic or pinout for the T9+ control board? Post by: BitMaxz on March 08, 2020, 11:25:23 PM I can't find any diagram or schematic for t9+ yet never heard of them(Bitmain is a closed source project).
But if you are looking for Pinouts for RX,TX and ground you can refer on this page below. - https://support.bitmain.com/hc/en-us/articles/360012747014-How-to-set-up-T9-test-jig-manual-for-T9-S9-Hydro-hash-boards - https://bitcointalk.org/index.php?topic=2386296.0 Title: Re: Does anyone have a schematic or pinout for the T9+ control board? Post by: mikeywith on March 09, 2020, 12:19:07 AM Bitmain does not publish this kind of data, however, they have some stuff like this (https://easyupload.io/zp1lon), that has the pinouts and a lot more information, sadly none for T9 neither ETH mining gears, but I can tell you where to get those. ::)
Aliexpress, find a chip seller and ask them for "Repair Manual", they usually provide that if you actually do buy chips or any miner's component from them, that might not be the best solution, but if nobody here has those manuals to share them for free, there is no other place for you to find them, at least none that I know of. |