Title: S17 Pro and S19 Pro Rear Elevation CAD Data Post by: NoKeyboard-BTW on June 26, 2020, 11:33:03 PM Greetings, I'm awaiting the arrival of an S17 Pro but plan to eventually add a S19 Pro down the line. Right now, I'd love to find an owner of both that would be willing (or for a small fee) to whip out the calipers for an accurate rear elevation with dimensions because the goal is to model the rears in CAD for a very nerdy thermal/flow simulation.
What I'd be looking for in sketch form or CAD: - Locations of all screw placements centers. - Overall Width and Height (Not sure I trust the dims on Bitmain's site) - The Width and Height of the APW9 and APW12 power supply. Along with the dimension of the gap between the case and power supply. - Overall perimeter dims. of both power supply air outlet textures. It's a big ask but the info might be beneficial to some that would like to archive the info, mod, or just satisfy our engineering sides. ;D My email is minus.apex@gmail.com if you want to reach out that way Thank You, NKBTW Title: Re: S17 Pro and S19 Pro Rear Elevation CAD Data Post by: philipma1957 on June 26, 2020, 11:57:05 PM My gear is not accessible as it is 65 miles away.
Nice idea I would love to see it when you make it. Title: Re: S17 Pro and S19 Pro Rear Elevation CAD Data Post by: NoKeyboard-BTW on June 27, 2020, 02:00:20 AM My gear is not accessible as it is 65 miles away. Nice idea I would love to see it when you make it. Always thankful Philip, Couldn't think of a better place to ask. They aren't door stops yet so I understand the inconvenience of the whole idea. |