|
Title: M31S+ 80T - Need measurements Post by: Texnoz on September 21, 2020, 07:11:24 AM Alright so I'm currently looking for some confirmation on Whatsminer M31S+ 80T Length + Width + Height, and the type of PSU, I will attach 2 pictures. There's a lot of mixed feelings because NON of the pictures online really tell the physical look of the miner - and I can't seem to find any youtube videos about this particular miner.
Picture 1 - shows a miner with PSU covering all the way to exhaust fan: https://i.imgur.com/Awe04Zb.png Picture 2 - shows a miner with PSU not going all the way to exhaust fan: https://i.imgur.com/bsUUhD4.png Does anyone own or have a whatsminer m31s+ 80T, physically? Could you please take a picture and show me if it's picture 1 or 2 which is the official model. Title: Re: M31S+ 80T - Need measurements Post by: philipma1957 on September 21, 2020, 03:51:13 PM I went to MicroBT.com
they have 2 psu's https://www.microbt.com/ https://qiniu.microbt.com/uploading/2019-12-24/1014_11:45:07_377c39cc6c6501ac989d5d7193709d2c.jpg The difference between M30S-88T and M20S-68T is that the power supply is replaced with a flat style, which reduces the height of the whole machine by 15mm, and the weight of the whole machine is 0.9kg lighter than the M20S-68T. https://qiniu.microbt.com/uploading/2019-12-24/1014_11:52:45_5029946ea49127a50debad582292b221.jpg flat psu with middle jack for power https://qiniu.microbt.com/uploading/2019-12-24/1014_11:56:16_2171be799e71b6ff0505cb8049cab0f7.jpg everyone shows the long flatter psu with power jack in the middle. https://www.whatsminer.com/mall/BTmall.html?locale=en So I think. you will get that one. But knowing asic builders you won't know until you get it. and some will get the taller shorter psu with the power jack to the upper left. |