Bitcoin Forum

Economy => Computer hardware => Topic started by: fyoung55 on September 24, 2020, 12:08:39 AM



Title: WTB L3+ hashboard
Post by: fyoung55 on September 24, 2020, 12:08:39 AM
hey guys,
My buddy picked up an old L3+ for cheap on ebay, but it 1 dead hashboard.  anyone have a single good hashboard laying around?  The unit only cost $60, so he's not looking to spend anywhere near that.  Let me know what you have.


Title: Re: WTB L3+ hashboard
Post by: philipma1957 on September 24, 2020, 02:01:27 AM
hey guys,
My buddy picked up an old L3+ for cheap on ebay, but it 1 dead hashboard.  anyone have a single good hashboard laying around?  The unit only cost $60, so he's not looking to spend anywhere near that.  Let me know what you have.

I got one let me check. get back to you in the morning.


Title: Re: WTB L3+ hashboard
Post by: TotallyNotaLiar on September 24, 2020, 02:02:51 AM
make sure it's the exact same model of L3+ otherwise you might have difficulties getting the hashboard to \sync.


Title: Re: WTB L3+ hashboard
Post by: fyoung55 on September 24, 2020, 03:44:42 PM
what do you mean by model?  Is there a hashboard number I'm looking for or a model generation?  I figured all l3+ were the same...

Thanks Phil, let me know what you find.


Title: Re: WTB L3+ hashboard
Post by: philipma1957 on September 24, 2020, 10:31:59 PM
what do you mean by model?  Is there a hashboard number I'm looking for or a model generation?  I figured all l3+ were the same...

Thanks Phil, let me know what you find.

 I do not know what he means.  But I am walking out to the shed to grab a unit.  give me an hour ro post a photo.

I will ship in via usa post office zone A flat rate about ten bucks to ship it.

So 10 plus ? = under 25 maybe 23 bucks.


OKAY I thought about this maybe some l3+ have different heat sinks. Some s9's will not fit with other s9's as the heat sinks are

 medium on the back + medium medium on the front.

or

short on the back of the pcb and tall on the front of the pcb

so if the pcb is short+tall you can not slide a medium+medium pcb next to it.

as the medium on the back will hit the tall on the board next to it.

so an s9 needs to be


     (mm)(mm)(mm)
or  (st)(st)(st)

in fact the grooves on a shell are a little different


maybe l3+ are that way.


Title: Re: WTB L3+ hashboard
Post by: fyoung55 on September 24, 2020, 11:58:49 PM
Let me pull mine and measure.  I'll also take a pic.  I think the price point will be closer to $15 plus shipping ($25 total?) since he paid $60 total for the rig and psu.  If that seems too low, I'll talk to him again.  Pics and measurements will be posted shortly.


Title: Re: WTB L3+ hashboard
Post by: fyoung55 on September 25, 2020, 12:30:07 AM
254mm long by 157mm tall OR
10" long by 6 3/16 tall

https://imgur.com/a/ylSuDy4


Title: Re: WTB L3+ hashboard
Post by: philipma1957 on September 25, 2020, 04:22:12 AM
254mm long by 157mm tall OR
10" long by 6 3/16 tall

https://imgur.com/a/ylSuDy4

i will pull one of the boards and check it in the morning.

looks good shoot me a pm please.


Title: Re: WTB L3+ hashboard
Post by: fyoung55 on September 25, 2020, 09:09:23 PM
All set.  Thanks Phil.