|
Title: (solved) Overclocking Sapphire 5830 Fail. Post by: El Cabron on November 25, 2011, 12:37:23 PM I can not overclock 2 of my Sapphires to 810 from a stock of 800 without it crashing. Anyone ever see anything like this?
I am using afterburner. Edit, If I change anything at all it will crash... Fan speed mem.. whats going on??? Title: Re: Overclocking Sapphire 5830 Fail. Post by: yogi on November 25, 2011, 02:08:50 PM Have you tested these:-
1) Adequate power supply 2) Overheating 3) Bad corrupt driver 4) Conflict with other software/driver Title: Re: Overclocking Sapphire 5830 Fail. Post by: SaintFlow on November 25, 2011, 02:20:21 PM I am no friend of afterburner.
I usded trixx to find a stable level they can run on - for me this is easily 950 mhz gpu 300 mhz ram / i ran as much as 1025 gpu for days but the fan has aged now ... once i know the card can take it i flash it into its bios: edit a bios http://www.techpowerup.com/rbe/ flash it to hardware http://www.techpowerup.com/downloads/1122/Winflash_2.0.1.2.html done - no trixx or afterburner needed ever again Title: Re: Overclocking Sapphire 5830 Fail. Post by: SaintFlow on November 25, 2011, 02:31:18 PM these are exactly the reasons why i finally decided i want to flash it on the cards.
since then i need to make no changes for nothing after a rebooted system Title: Re: Overclocking Sapphire 5830 Fail. Post by: shakaru on November 26, 2011, 12:03:37 AM disable ULPS
Title: Re: Overclocking Sapphire 5830 Fail. Post by: sadpandatech on November 26, 2011, 12:20:49 AM disable ULPS Aye, on that same settings tab make sure to un-check 'Synchronize cards in multi GPU config' as well... And yea, trixx fixed some of the issue affecting multiple cards. If you want undervolting, you need to edit the bios to lower its possible minimum. The techpowerup tools linked to previsouly are what I use. |