|
Title: Canīt upgrade a conversionn file into the test fixture Post by: amelo2 on November 02, 2020, 03:02:25 AM Hello.
I got a problem uograding a conversion file into my test fixture This the old conversion file name:0x200fc513 Code: AXI fpga dev virtual address is 0xcf99c000 And it is supposed to be this after upgrading: Code: *base_vir_addr = 0xb031 I'm using a SD card of 1 GB to make the upgrading. The indicator light flashes, itīs not upgradind the file, though How can I upgrade this file into the test fixture? Title: Re: Canīt upgrade a conversionn file into the test fixture Post by: BitMaxz on November 02, 2020, 07:25:22 PM It seems he is talking about a test fixture for ASIC miners.
What file you currently have(conversion file)? Is it for s9 or t9+ or for above antminer series? You will need to burn the file with diskimager you can donwload to available firmware from zeusBTC from this link below. - https://www.zeusbtc.com/Repair.asp For the latest firmware that supports the latest antminer is not yet available in public but I think you can request it on Bitmain about this firmware. |