Title: one hashboard is 91 Degree
Post by: moritezza on December 24, 2020, 09:57:24 PM
Hello. i have a t17e. one hashboard is 91 degree, screenshot below: https://image.prntscr.com/image/-VuinsLYS8aov1m8Gkey1Q.png now i want know if it has any issue? should i do send hashboard to repair? or its normall? how i can check its which hashboard? i mean its Chain[0] or Chain[1] or Chain[2]? log is below: request_mem_region OK! 2020-12-24 21:27:18:driver-btm-api.c:482:check_chain_conf_same: Config are different, min = 1820, max = 1830, will use max one. 2020-12-24 21:27:18:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed voltage_ref = 1830
2020-12-24 21:27:18:thread.c:1523:create_read_nonce_reg_thread: create thread 2020-12-24 21:27:18:driver-btm-api.c:698:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a 2020-12-24 21:27:18:driver-btm-api.c:699:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2020-12-24 21:27:18:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a 2020-12-24 21:27:18:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-12-24 21:27:18:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a 2020-12-24 21:27:18:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-12-24 21:27:25:driver-btm-api.c:2344:bitmain_board_init: Fan check passed. 2020-12-24 21:27:26:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-12-24 21:27:28:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-12-24 21:27:29:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-12-24 21:27:31:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-12-24 21:27:32:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-12-24 21:27:34:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-12-24 21:27:34:thread.c:1518:create_pic_heart_beat_thread: create thread 2020-12-24 21:27:36:power_api.c:241:power_init: power type version: 0x0042 2020-12-24 21:27:37:power_api.c:259:power_init: Power init: 2020-12-24 21:27:37:power_api.c:260:power_init: current_voltage_raw = 1932 2020-12-24 21:27:37:power_api.c:261:power_init: highest_voltage_raw = 2000 2020-12-24 21:27:37:power_api.c:262:power_init: working_voltage_raw = 1800 2020-12-24 21:27:37:power_api.c:263:power_init: higher_voltage_raw = 1850 2020-12-24 21:27:37:power_api.c:264:power_init: check_asic_voltage_raw = 1800 2020-12-24 21:27:37:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish. 2020-12-24 21:28:39:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic: 2020-12-24 21:28:39:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800 2020-12-24 21:28:42:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step. 2020-12-24 21:28:56:uart.c:69:set_baud: set UART baud to 115200 chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2020-12-24 21:29:00:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 78 asic, times 0 chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2020-12-24 21:29:05:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 78 asic, times 0 chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2020-12-24 21:29:09:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 78 asic, times 0 2020-12-24 21:29:09:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic. 2020-12-24 21:29:09:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step. 2020-12-24 21:29:34:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x330003 2020-12-24 21:29:34:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203 2020-12-24 21:29:34:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. chain 0 domain 0: d0 0.391, d1 0.391, d2 0.379, d3 0.387, sum = 1.548706 chain 0 domain 1: d0 0.383, d1 0.388, d2 0.383, d3 0.375, sum = 1.529724 chain 0 domain 2: d0 0.379, d1 0.375, d2 0.388, d3 0.356, sum = 1.497864 chain 0 domain 3: d0 0.374, d1 0.372, d2 0.365, d3 0.376, sum = 1.487610 chain 0 domain 4: d0 0.392, d1 0.390, d2 0.385, d3 0.389, sum = 1.554993 chain 0 domain 5: d0 0.388, d1 0.385, d2 0.397, d3 0.390, sum = 1.560364 chain 0 domain 6: d0 0.389, d1 0.390, d2 0.377, d3 0.366, sum = 1.521973 chain 0 domain 7: d0 0.398, d1 0.392, d2 0.398, d3 0.396, sum = 1.583313 chain 0 domain 8: d0 0.376, d1 0.382, d2 0.383, d3 0.353, sum = 1.494934 chain 0 domain 9: d0 0.389, d1 0.390, d2 0.384, d3 0.387, sum = 1.549988 chain 0 domain 10: d0 0.373, d1 0.380, d2 0.367, d3 0.372, sum = 1.491638 chain 0 domain 11: d0 0.380, d1 0.372, d2 0.386, d3 0.358, sum = 1.494873 chain 0 domain 12: d0 0.360, d1 0.363, d2 0.362, d3 0.361, sum = 1.445984 2020-12-24 21:29:35:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.379, d1 0.389, d2 0.381, d3 0.348, sum = 1.497314 chain 1 domain 1: d0 0.410, d1 0.405, d2 0.388, d3 0.401, sum = 1.604614 chain 1 domain 2: d0 0.395, d1 0.395, d2 0.398, d3 0.396, sum = 1.583618 chain 1 domain 3: d0 0.360, d1 0.373, d2 0.377, d3 0.375, sum = 1.485352 chain 1 domain 4: d0 0.381, d1 0.385, d2 0.398, d3 0.388, sum = 1.551758 chain 1 domain 5: d0 0.377, d1 0.374, d2 0.389, d3 0.371, sum = 1.511902 chain 1 domain 6: d0 0.400, d1 0.400, d2 0.411, d3 0.404, sum = 1.615234 chain 1 domain 7: d0 0.391, d1 0.399, d2 0.384, d3 0.391, sum = 1.564697 chain 1 domain 8: d0 0.362, d1 0.375, d2 0.370, d3 0.381, sum = 1.488220 chain 1 domain 9: d0 0.369, d1 0.380, d2 0.381, d3 0.363, sum = 1.493347 chain 1 domain 10: d0 0.366, d1 0.372, d2 0.389, d3 0.359, sum = 1.484924 chain 1 domain 11: d0 0.372, d1 0.380, d2 0.374, d3 0.369, sum = 1.494629 chain 1 domain 12: d0 0.365, d1 0.371, d2 0.371, d3 0.370, sum = 1.477722 2020-12-24 21:29:35:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.384, d1 0.376, d2 0.395, d3 0.385, sum = 1.540344 chain 2 domain 1: d0 0.390, d1 0.389, d2 0.384, d3 0.387, sum = 1.550110 chain 2 domain 2: d0 0.398, d1 0.402, d2 0.382, d3 0.394, sum = 1.574707 chain 2 domain 3: d0 0.379, d1 0.378, d2 0.390, d3 0.350, sum = 1.496155 chain 2 domain 4: d0 0.391, d1 0.384, d2 0.385, d3 0.387, sum = 1.547668 chain 2 domain 5: d0 0.381, d1 0.384, d2 0.372, d3 0.366, sum = 1.502563 chain 2 domain 6: d0 0.386, d1 0.393, d2 0.373, d3 0.384, sum = 1.535828 chain 2 domain 7: d0 0.364, d1 0.373, d2 0.361, d3 0.374, sum = 1.472229 chain 2 domain 8: d0 0.382, d1 0.389, d2 0.398, d3 0.390, sum = 1.559021 chain 2 domain 9: d0 0.383, d1 0.384, d2 0.366, d3 0.369, sum = 1.502014 chain 2 domain 10: d0 0.375, d1 0.374, d2 0.385, d3 0.358, sum = 1.491516 chain 2 domain 11: d0 0.393, d1 0.387, d2 0.399, d3 0.393, sum = 1.571472 chain 2 domain 12: d0 0.368, d1 0.369, d2 0.369, d3 0.370, sum = 1.476440 2020-12-24 21:29:35:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:29:37:temperature.c:272:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218 2020-12-24 21:29:38:temperature.c:272:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218 2020-12-24 21:29:40:temperature.c:272:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218 2020-12-24 21:29:45:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 8 2020-12-24 21:29:45:uart.c:69:set_baud: set UART baud to 3000000 2020-12-24 21:29:45 voltage[0] = 1830 2020-12-24 21:29:45 voltage[1] = 1820 2020-12-24 21:29:45 voltage[2] = 1830 2020-12-24 21:29:45:driver-btm-api.c:482:check_chain_conf_same: Config are different, min = 1820, max = 1830, will use max one. 2020-12-24 21:29:45:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1830 2020-12-24 21:29:45:thread.c:1538:create_check_miner_status_thread: create thread 2020-12-24 21:29:45:thread.c:1528:create_show_miner_status_thread: create thread 2020-12-24 21:29:45:thread.c:1503:create_temperature_monitor_thread: create thread 2020-12-24 21:29:45:thread.c:1580:create_fan_monitor_thread: create thread 2020-12-24 21:29:45:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 530, is_higher_voltage = true 2020-12-24 21:29:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 14, chip_temp 13 ~ 21, now 6.0s, target 21.0 2020-12-24 21:29:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 15, chip_temp 13 ~ 21, now 7.0s, target 21.2 2020-12-24 21:29:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 15, chip_temp 12 ~ 21, now 8.0s, target 21.3 2020-12-24 21:29:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 8 ~ 15, chip_temp 12 ~ 21, now 9.0s, target 21.5 2020-12-24 21:29:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 16, chip_temp 13 ~ 22, now 10.0s, target 21.7 2020-12-24 21:29:55:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 22 > 21.7 target_temp. 2020-12-24 21:30:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 14, chip_temp 12 ~ 21, now 16.0s, target 22.7 2020-12-24 21:30:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 16, chip_temp 12 ~ 22, now 17.0s, target 22.8 2020-12-24 21:30:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 16, chip_temp 13 ~ 22, now 18.0s, target 23.0 2020-12-24 21:30:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 15, chip_temp 13 ~ 22, now 19.0s, target 23.2 2020-12-24 21:30:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 16, chip_temp 13 ~ 20, now 20.0s, target 23.3 2020-12-24 21:30:05:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 54 2020-12-24 21:30:05:frequency.c:665:inc_freq_with_fixed_vco: set to 54M, get pcb 9 ~ 16, chip_temp 13 ~ 20 2020-12-24 21:30:05:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step. 2020-12-24 21:30:18:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:18:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 54 clock_counter_limit 5, no check, skip. 2020-12-24 21:30:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 16, chip_temp 14 ~ 23, now 40.7s, target 26.8 2020-12-24 21:30:26:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 63 2020-12-24 21:30:26:frequency.c:665:inc_freq_with_fixed_vco: set to 63M, get pcb 9 ~ 16, chip_temp 14 ~ 23 2020-12-24 21:30:26:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:26:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 63 clock_counter_limit 7, no check, skip. 2020-12-24 21:30:34:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 17, chip_temp 14 ~ 25, now 48.8s, target 28.1 2020-12-24 21:30:34:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 73 2020-12-24 21:30:34:frequency.c:665:inc_freq_with_fixed_vco: set to 73M, get pcb 9 ~ 17, chip_temp 14 ~ 25 2020-12-24 21:30:34:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:34:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 73 clock_counter_limit 8, no check, skip. 2020-12-24 21:30:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 17, chip_temp 14 ~ 25, now 56.8s, target 29.5 2020-12-24 21:30:42:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 75 2020-12-24 21:30:42:frequency.c:665:inc_freq_with_fixed_vco: set to 75M, get pcb 10 ~ 17, chip_temp 14 ~ 25 2020-12-24 21:30:42:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:42:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 75 clock_counter_limit 9, no check, skip. 2020-12-24 21:30:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 19, chip_temp 15 ~ 25, now 64.8s, target 30.8 2020-12-24 21:30:50:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 88 2020-12-24 21:30:50:frequency.c:665:inc_freq_with_fixed_vco: set to 88M, get pcb 10 ~ 19, chip_temp 15 ~ 25 2020-12-24 21:30:50:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:50:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 88 clock_counter_limit 11, no check, skip. 2020-12-24 21:30:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 19, chip_temp 15 ~ 26, now 72.8s, target 29.1 2020-12-24 21:30:58:frequency.c:657:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 94 2020-12-24 21:30:58:frequency.c:665:inc_freq_with_fixed_vco: set to 94M, get pcb 9 ~ 19, chip_temp 15 ~ 26 2020-12-24 21:30:58:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:30:58:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 94 clock_counter_limit 12, no check, skip. 2020-12-24 21:31:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 9 ~ 20, chip_temp 15 ~ 28, now 80.8s, target 30.5 2020-12-24 21:31:06:frequency.c:657:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 106 2020-12-24 21:31:06:frequency.c:665:inc_freq_with_fixed_vco: set to 106M, get pcb 9 ~ 20, chip_temp 15 ~ 28 2020-12-24 21:31:06:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:06:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 106 clock_counter_limit 13, no check, skip. 2020-12-24 21:31:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 20, chip_temp 15 ~ 29, now 88.8s, target 31.8 2020-12-24 21:31:14:frequency.c:657:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 110 2020-12-24 21:31:14:frequency.c:665:inc_freq_with_fixed_vco: set to 110M, get pcb 10 ~ 20, chip_temp 15 ~ 29 2020-12-24 21:31:14:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:14:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 110 clock_counter_limit 14, no check, skip. 2020-12-24 21:31:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 20, chip_temp 15 ~ 31, now 96.8s, target 33.1 2020-12-24 21:31:22:frequency.c:657:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 126 2020-12-24 21:31:22:frequency.c:665:inc_freq_with_fixed_vco: set to 126M, get pcb 10 ~ 20, chip_temp 15 ~ 31 2020-12-24 21:31:22:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:22:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 126 clock_counter_limit 17, no check, skip. 2020-12-24 21:31:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 21, chip_temp 16 ~ 32, now 104.8s, target 34.5 2020-12-24 21:31:30:frequency.c:657:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 132 2020-12-24 21:31:30:frequency.c:665:inc_freq_with_fixed_vco: set to 132M, get pcb 10 ~ 21, chip_temp 16 ~ 32 2020-12-24 21:31:30:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:30:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 132 clock_counter_limit 18, no check, skip. 2020-12-24 21:31:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 21, chip_temp 14 ~ 33, now 112.8s, target 35.8 2020-12-24 21:31:38:frequency.c:657:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 147 2020-12-24 21:31:38:frequency.c:665:inc_freq_with_fixed_vco: set to 147M, get pcb 10 ~ 21, chip_temp 14 ~ 33 2020-12-24 21:31:38:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:38:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 147 clock_counter_limit 20, no check, skip. 2020-12-24 21:31:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 23, chip_temp 17 ~ 35, now 120.9s, target 37.1 2020-12-24 21:31:46:frequency.c:657:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 176 2020-12-24 21:31:46:frequency.c:665:inc_freq_with_fixed_vco: set to 176M, get pcb 10 ~ 23, chip_temp 17 ~ 35 2020-12-24 21:31:46:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:46:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 176 clock_counter_limit 25, no check, skip. 2020-12-24 21:31:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 24, chip_temp 17 ~ 37, now 128.9s, target 38.5 2020-12-24 21:31:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 24, chip_temp 17 ~ 38, now 129.9s, target 38.6 2020-12-24 21:31:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 24, chip_temp 17 ~ 37, now 130.9s, target 38.8 2020-12-24 21:31:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 25, chip_temp 16 ~ 37, now 131.9s, target 39.0 2020-12-24 21:31:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 24, chip_temp 16 ~ 37, now 132.9s, target 39.1 2020-12-24 21:31:58:frequency.c:657:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 189 2020-12-24 21:31:58:frequency.c:665:inc_freq_with_fixed_vco: set to 189M, get pcb 10 ~ 24, chip_temp 16 ~ 37 2020-12-24 21:31:58:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:31:58:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 189 clock_counter_limit 27, no check, skip. 2020-12-24 21:32:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 25, chip_temp 18 ~ 41, now 140.9s, target 40.5 2020-12-24 21:32:06:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 41 > 40.5 target_temp. 2020-12-24 21:32:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 10 ~ 27, chip_temp 17 ~ 41, now 146.9s, target 41.5 2020-12-24 21:32:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 26, chip_temp 17 ~ 40, now 147.9s, target 41.6 2020-12-24 21:32:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 27, chip_temp 18 ~ 41, now 148.9s, target 41.8 2020-12-24 21:32:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 27, chip_temp 18 ~ 43, now 149.9s, target 42.0 2020-12-24 21:32:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 43 > 42.0 target_temp. 2020-12-24 21:32:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 27, chip_temp 18 ~ 42, now 155.9s, target 43.0 2020-12-24 21:32:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 28, chip_temp 18 ~ 42, now 156.9s, target 43.2 2020-12-24 21:32:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 28, chip_temp 17 ~ 42, now 157.9s, target 43.3 2020-12-24 21:32:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 28, chip_temp 17 ~ 43, now 158.9s, target 43.5 2020-12-24 21:32:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 27, chip_temp 18 ~ 43, now 159.9s, target 43.7 2020-12-24 21:32:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 28, chip_temp 18 ~ 43, now 160.9s, target 43.8 2020-12-24 21:32:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 29, chip_temp 17 ~ 42, now 161.9s, target 44.0 2020-12-24 21:32:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 28, chip_temp 18 ~ 43, now 162.9s, target 44.2 2020-12-24 21:32:29:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 29, chip_temp 18 ~ 42, now 163.9s, target 44.3 2020-12-24 21:32:29:frequency.c:657:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 220 2020-12-24 21:32:29:frequency.c:665:inc_freq_with_fixed_vco: set to 220M, get pcb 11 ~ 29, chip_temp 18 ~ 42 2020-12-24 21:32:29:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:32:29:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 220 clock_counter_limit 32, no check, skip. 2020-12-24 21:32:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 30, chip_temp 19 ~ 46, now 172.0s, target 45.7 2020-12-24 21:32:37:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 46 > 45.7 target_temp. 2020-12-24 21:32:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 31, chip_temp 18 ~ 46, now 178.0s, target 46.7 2020-12-24 21:32:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 31, chip_temp 19 ~ 47, now 179.0s, target 46.8 2020-12-24 21:32:44:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 47 > 46.8 target_temp. 2020-12-24 21:32:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 31, chip_temp 19 ~ 47, now 185.0s, target 47.8 2020-12-24 21:32:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 31, chip_temp 19 ~ 47, now 186.0s, target 48.0 2020-12-24 21:32:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 31, chip_temp 19 ~ 48, now 187.0s, target 48.2 2020-12-24 21:32:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 31, chip_temp 19 ~ 48, now 188.0s, target 48.3 2020-12-24 21:32:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 32, chip_temp 19 ~ 47, now 189.0s, target 48.5 2020-12-24 21:32:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 31, chip_temp 19 ~ 47, now 190.0s, target 48.7 2020-12-24 21:32:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 32, chip_temp 19 ~ 48, now 191.0s, target 48.8 2020-12-24 21:32:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 32, chip_temp 18 ~ 49, now 192.0s, target 49.0 2020-12-24 21:32:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 49 > 49.0 target_temp. 2020-12-24 21:33:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 33, chip_temp 19 ~ 48, now 198.0s, target 50.0 2020-12-24 21:33:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 33, chip_temp 19 ~ 48, now 199.0s, target 50.2 2020-12-24 21:33:04:frequency.c:657:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 265 2020-12-24 21:33:04:frequency.c:665:inc_freq_with_fixed_vco: set to 265M, get pcb 11 ~ 33, chip_temp 19 ~ 48 2020-12-24 21:33:04:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:33:04:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 265 clock_counter_limit 39, no check, skip. 2020-12-24 21:33:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 11 ~ 33, chip_temp 19 ~ 52, now 207.0s, target 51.5 2020-12-24 21:33:12:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 52 > 51.5 target_temp. 2020-12-24 21:33:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 33, chip_temp 19 ~ 52, now 213.0s, target 52.5 2020-12-24 21:33:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 33, chip_temp 20 ~ 52, now 214.0s, target 52.7 2020-12-24 21:33:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 34, chip_temp 20 ~ 53, now 215.0s, target 52.8 2020-12-24 21:33:20:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 53 > 52.8 target_temp. 2020-12-24 21:33:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 36, chip_temp 20 ~ 54, now 221.0s, target 53.8 2020-12-24 21:33:26:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 54 > 53.8 target_temp. 2020-12-24 21:33:32:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 20 ~ 54, now 227.0s, target 54.8 2020-12-24 21:33:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 36, chip_temp 20 ~ 54, now 228.0s, target 55.0 2020-12-24 21:33:34:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 20 ~ 54, now 229.0s, target 55.2 2020-12-24 21:33:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 20 ~ 56, now 230.0s, target 55.3 2020-12-24 21:33:35:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 56 > 55.3 target_temp. 2020-12-24 21:33:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 21 ~ 55, now 236.0s, target 56.3 2020-12-24 21:33:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 21 ~ 56, now 237.0s, target 56.5 2020-12-24 21:33:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 37, chip_temp 20 ~ 56, now 238.0s, target 56.7 2020-12-24 21:33:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 38, chip_temp 20 ~ 56, now 239.0s, target 56.8 2020-12-24 21:33:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 38, chip_temp 21 ~ 57, now 240.0s, target 57.0 2020-12-24 21:33:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 38, chip_temp 21 ~ 56, now 241.0s, target 57.2 2020-12-24 21:33:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 38, chip_temp 20 ~ 55, now 242.0s, target 57.3 2020-12-24 21:33:47:frequency.c:657:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 378 2020-12-24 21:33:47:frequency.c:665:inc_freq_with_fixed_vco: set to 378M, get pcb 13 ~ 38, chip_temp 20 ~ 55 2020-12-24 21:33:47:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:33:47:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 378 clock_counter_limit 57, no check, skip. 2020-12-24 21:33:50:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. chain 0 domain 0: d0 0.406, d1 0.410, d2 0.402, d3 0.406, sum = 1.623291 chain 0 domain 1: d0 0.403, d1 0.391, d2 0.416, d3 0.403, sum = 1.613464 chain 0 domain 2: d0 0.401, d1 0.395, d2 0.402, d3 0.399, sum = 1.598083 chain 0 domain 3: d0 0.405, d1 0.383, d2 0.406, d3 0.398, sum = 1.593323 chain 0 domain 4: d0 0.405, d1 0.393, d2 0.426, d3 0.408, sum = 1.631836 chain 0 domain 5: d0 0.397, d1 0.401, d2 0.393, d3 0.397, sum = 1.588257 chain 0 domain 6: d0 0.397, d1 0.397, d2 0.419, d3 0.404, sum = 1.618042 chain 0 domain 7: d0 0.406, d1 0.392, d2 0.423, d3 0.407, sum = 1.628296 chain 0 domain 8: d0 0.398, d1 0.394, d2 0.418, d3 0.403, sum = 1.613403 chain 0 domain 9: d0 0.402, d1 0.411, d2 0.402, d3 0.405, sum = 1.619934 chain 0 domain 10: d0 0.399, d1 0.392, d2 0.417, d3 0.402, sum = 1.610413 chain 0 domain 11: d0 0.402, d1 0.392, d2 0.392, d3 0.395, sum = 1.580811 chain 0 domain 12: d0 0.388, d1 0.387, d2 0.386, d3 0.387, sum = 1.549011 2020-12-24 21:33:50:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 12: d0 0.392, d1 0.391, d2 0.390, d3 0.391, sum = 1.563049 2020-12-24 21:33:51:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.404, d1 0.399, d2 0.396, d3 0.399, sum = 1.598328 chain 2 domain 1: d0 0.409, d1 0.404, d2 0.377, d3 0.397, sum = 1.587036 chain 2 domain 2: d0 0.402, d1 0.397, d2 0.404, d3 0.401, sum = 1.603882 chain 2 domain 3: d0 0.405, d1 0.406, d2 0.391, d3 0.401, sum = 1.603333 chain 2 domain 4: d0 0.403, d1 0.396, d2 0.426, d3 0.408, sum = 1.632141 chain 2 domain 5: d0 0.403, d1 0.395, d2 0.417, d3 0.405, sum = 1.619141 chain 2 domain 6: d0 0.396, d1 0.397, d2 0.393, d3 0.395, sum = 1.581421 chain 2 domain 7: d0 0.391, d1 0.386, d2 0.411, d3 0.396, sum = 1.583679 chain 2 domain 8: d0 0.400, d1 0.409, d2 0.398, d3 0.402, sum = 1.609741 chain 2 domain 9: d0 0.398, d1 0.404, d2 0.381, d3 0.394, sum = 1.578003 chain 2 domain 10: d0 0.398, d1 0.406, d2 0.405, d3 0.403, sum = 1.611206 chain 2 domain 11: d0 0.406, d1 0.401, d2 0.405, d3 0.404, sum = 1.614929 chain 2 domain 12: d0 0.391, d1 0.388, d2 0.388, d3 0.389, sum = 1.555481 2020-12-24 21:33:51:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:33:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 40, chip_temp 24 ~ 64, now 251.6s, target 58.9 2020-12-24 21:33:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 64 > 58.9 target_temp. 2020-12-24 21:34:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 12 ~ 40, chip_temp 24 ~ 68, now 257.6s, target 59.9 2020-12-24 21:34:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 68 > 59.9 target_temp. 2020-12-24 21:34:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 42, chip_temp 22 ~ 69, now 263.6s, target 60.9 2020-12-24 21:34:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 69 > 60.9 target_temp. 2020-12-24 21:34:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 43, chip_temp 24 ~ 73, now 269.6s, target 61.9 2020-12-24 21:34:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 73 > 61.9 target_temp. 2020-12-24 21:34:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 45, chip_temp 24 ~ 72, now 275.6s, target 62.9 2020-12-24 21:34:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 72 > 62.9 target_temp. 2020-12-24 21:34:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 48, chip_temp 24 ~ 74, now 281.6s, target 63.9 2020-12-24 21:34:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 74 > 63.9 target_temp. 2020-12-24 21:34:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 48, chip_temp 25 ~ 76, now 287.6s, target 64.9 2020-12-24 21:34:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 76 > 64.9 target_temp. 2020-12-24 21:34:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 49, chip_temp 24 ~ 75, now 293.6s, target 65.9 2020-12-24 21:34:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 75 > 65.9 target_temp. 2020-12-24 21:34:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 50, chip_temp 24 ~ 77, now 299.7s, target 66.9 2020-12-24 21:34:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 77 > 66.9 target_temp. 2020-12-24 21:34:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 51, chip_temp 24 ~ 78, now 305.7s, target 67.9 2020-12-24 21:34:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 78 > 67.9 target_temp. 2020-12-24 21:34:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 53, chip_temp 24 ~ 79, now 311.7s, target 68.9 2020-12-24 21:34:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 79 > 68.9 target_temp. 2020-12-24 21:35:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 53, chip_temp 25 ~ 78, now 317.7s, target 69.9 2020-12-24 21:35:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 78 > 69.9 target_temp. 2020-12-24 21:35:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 52, chip_temp 24 ~ 79, now 323.7s, target 70.9 2020-12-24 21:35:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 79 > 70.9 target_temp. 2020-12-24 21:35:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 53, chip_temp 24 ~ 80, now 329.7s, target 71.9 2020-12-24 21:35:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 71.9 target_temp. 2020-12-24 21:35:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 54, chip_temp 24 ~ 80, now 335.7s, target 72.9 2020-12-24 21:35:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 72.9 target_temp. 2020-12-24 21:35:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 53, chip_temp 25 ~ 80, now 341.7s, target 73.9 2020-12-24 21:35:27:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 73.9 target_temp. 2020-12-24 21:35:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 55, chip_temp 24 ~ 80, now 347.7s, target 74.9 2020-12-24 21:35:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 80 > 74.9 target_temp. 2020-12-24 21:35:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 54, chip_temp 25 ~ 82, now 353.7s, target 75.9 2020-12-24 21:35:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 82 > 75.9 target_temp. 2020-12-24 21:35:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 54, chip_temp 25 ~ 81, now 359.7s, target 76.9 2020-12-24 21:35:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 76.9 target_temp. 2020-12-24 21:35:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 56, chip_temp 25 ~ 81, now 365.7s, target 77.9 2020-12-24 21:35:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 77.9 target_temp. 2020-12-24 21:35:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 55, chip_temp 24 ~ 81, now 371.7s, target 78.9 2020-12-24 21:35:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 78.9 target_temp. 2020-12-24 21:36:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 13 ~ 56, chip_temp 23 ~ 81, now 377.7s, target 79.9 2020-12-24 21:36:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 81 > 79.9 target_temp. 2020-12-24 21:36:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 54, chip_temp 24 ~ 83, now 383.7s, target 80.9 2020-12-24 21:36:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 83 > 80.9 target_temp. 2020-12-24 21:36:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 56, chip_temp 25 ~ 82, now 389.7s, target 81.9 2020-12-24 21:36:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 82 > 81.9 target_temp. 2020-12-24 21:36:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 56, chip_temp 24 ~ 81, now 395.7s, target 83.0 2020-12-24 21:36:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 55, chip_temp 25 ~ 82, now 396.7s, target 83.1 2020-12-24 21:36:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 55, chip_temp 24 ~ 80, now 397.7s, target 83.3 2020-12-24 21:36:23:frequency.c:657:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 441 2020-12-24 21:36:23:frequency.c:665:inc_freq_with_fixed_vco: set to 441M, get pcb 14 ~ 55, chip_temp 24 ~ 80 2020-12-24 21:36:23:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:36:23:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 441 clock_counter_limit 67, no check, skip. 2020-12-24 21:36:25:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. chain 0 domain 0: d0 0.403, d1 0.411, d2 0.385, d3 0.400, sum = 1.598816 chain 0 domain 1: d0 0.409, d1 0.393, d2 0.406, d3 0.402, sum = 1.610107 2020-12-24 21:36:26:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.408, d1 0.411, d2 0.385, d3 0.401, sum = 1.606323 chain 1 domain 12: d0 0.391, d1 0.388, d2 0.389, d3 0.389, sum = 1.557068 2020-12-24 21:36:27:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.406, d1 0.412, d2 0.387, d3 0.402, sum = 1.606995 chain 2 domain 1: d0 0.402, d1 0.398, d2 0.418, d3 0.406, sum = 1.624634 chain 2 domain 2: d0 0.408, d1 0.396, d2 0.400, d3 0.401, sum = 1.605652 chain 2 domain 3: d0 0.402, d1 0.395, d2 0.408, d3 0.401, sum = 1.605103 chain 2 domain 4: d0 0.410, d1 0.394, d2 0.391, d3 0.398, sum = 1.593079 chain 2 domain 5: d0 0.409, d1 0.391, d2 0.419, d3 0.406, sum = 1.625305 chain 2 domain 6: d0 0.402, d1 0.388, d2 0.385, d3 0.392, sum = 1.567383 chain 2 domain 7: d0 0.391, d1 0.377, d2 0.380, d3 0.378, sum = 1.525635 chain 2 domain 8: d0 0.400, d1 0.405, d2 0.374, d3 0.393, sum = 1.571045 chain 2 domain 9: d0 0.405, d1 0.387, d2 0.401, d3 0.398, sum = 1.591003 chain 2 domain 10: d0 0.395, d1 0.399, d2 0.401, d3 0.398, sum = 1.593384 chain 2 domain 11: d0 0.408, d1 0.402, d2 0.401, d3 0.404, sum = 1.614868 chain 2 domain 12: d0 0.392, d1 0.389, d2 0.388, d3 0.390, sum = 1.558594 2020-12-24 21:36:27:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:36:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 57, chip_temp 26 ~ 85, now 407.3s, target 84.9 2020-12-24 21:36:33:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 85 > 84.9 target_temp. 2020-12-24 21:36:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 56, chip_temp 26 ~ 86, now 413.3s, target 85.9 2020-12-24 21:36:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 86 > 85.9 target_temp. 2020-12-24 21:36:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 56, chip_temp 26 ~ 88, now 419.3s, target 86.9 2020-12-24 21:36:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 88 > 86.9 target_temp. 2020-12-24 21:36:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 57, chip_temp 26 ~ 90, now 425.3s, target 87.9 2020-12-24 21:36:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 90 > 87.9 target_temp. 2020-12-24 21:36:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 58, chip_temp 27 ~ 90, now 431.3s, target 88.9 2020-12-24 21:36:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 90 > 88.9 target_temp. 2020-12-24 21:37:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 14 ~ 60, chip_temp 26 ~ 91, now 437.3s, target 89.9 2020-12-24 21:37:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 91 > 89.9 target_temp. 2020-12-24 21:37:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 61, chip_temp 28 ~ 93, now 443.3s, target 90.9 2020-12-24 21:37:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 93 > 90.9 target_temp. 2020-12-24 21:37:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 60, chip_temp 25 ~ 92, now 449.3s, target 91.9 2020-12-24 21:37:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 92 > 91.9 target_temp. 2020-12-24 21:37:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 60, chip_temp 26 ~ 94, now 455.4s, target 92.9 2020-12-24 21:37:21:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 94 > 92.9 target_temp. 2020-12-24 21:37:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 15 ~ 63, chip_temp 26 ~ 92, now 461.4s, target 93.9 2020-12-24 21:37:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 16 ~ 62, chip_temp 27 ~ 92, now 462.4s, target 94.1 2020-12-24 21:37:28:frequency.c:657:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 530 2020-12-24 21:37:28:frequency.c:665:inc_freq_with_fixed_vco: set to 530M, get pcb 16 ~ 62, chip_temp 27 ~ 92 2020-12-24 21:37:28:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2000, step by step. 2020-12-24 21:37:41:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. 2020-12-24 21:37:41:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.387, d1 0.381, d2 0.387, d3 0.379, sum = 1.534546 chain 1 domain 1: d0 0.399, d1 0.398, d2 0.398, d3 0.398, sum = 1.592285 chain 1 domain 2: d0 0.400, d1 0.387, d2 0.395, d3 0.394, sum = 1.576477 chain 1 domain 3: d0 0.384, d1 0.391, d2 0.387, d3 0.363, sum = 1.524963 chain 1 domain 4: d0 0.383, d1 0.380, d2 0.381, d3 0.352, sum = 1.496338 chain 1 domain 5: d0 0.379, d1 0.372, d2 0.374, d3 0.366, sum = 1.490417 chain 1 domain 6: d0 0.380, d1 0.388, d2 0.377, d3 0.351, sum = 1.495239 chain 1 domain 7: d0 0.377, d1 0.370, d2 0.368, d3 0.372, sum = 1.487610 chain 1 domain 8: d0 0.372, d1 0.369, d2 0.384, d3 0.364, sum = 1.488770 chain 1 domain 9: d0 0.379, d1 0.372, d2 0.370, d3 0.371, sum = 1.492126 chain 1 domain 10: d0 0.374, d1 0.371, d2 0.388, d3 0.362, sum = 1.494934 chain 1 domain 11: d0 0.381, d1 0.378, d2 0.373, d3 0.361, sum = 1.492737 chain 1 domain 12: d0 0.372, d1 0.369, d2 0.370, d3 0.371, sum = 1.482605 2020-12-24 21:37:42:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.384, d1 0.380, d2 0.394, d3 0.340, sum = 1.497681 chain 2 domain 1: d0 0.390, d1 0.386, d2 0.366, d3 0.353, sum = 1.494629 chain 2 domain 2: d0 0.388, d1 0.394, d2 0.365, d3 0.382, sum = 1.528442 chain 2 domain 3: d0 0.388, d1 0.386, d2 0.359, d3 0.378, sum = 1.510742 chain 2 domain 4: d0 0.385, d1 0.393, d2 0.369, d3 0.349, sum = 1.496643 chain 2 domain 5: d0 0.382, d1 0.374, d2 0.377, d3 0.376, sum = 1.508118 chain 2 domain 6: d0 0.375, d1 0.382, d2 0.382, d3 0.349, sum = 1.488159 chain 2 domain 7: d0 0.367, d1 0.361, d2 0.369, d3 0.366, sum = 1.463806 chain 2 domain 8: d0 0.372, d1 0.374, d2 0.379, d3 0.363, sum = 1.488708 chain 2 domain 9: d0 0.386, d1 0.377, d2 0.387, d3 0.345, sum = 1.495544 chain 2 domain 10: d0 0.378, d1 0.372, d2 0.374, d3 0.375, sum = 1.499146 chain 2 domain 11: d0 0.389, d1 0.381, d2 0.399, d3 0.390, sum = 1.559998 chain 2 domain 12: d0 0.373, d1 0.371, d2 0.371, d3 0.372, sum = 1.486633 2020-12-24 21:37:42:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:37:42:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2020-12-24 21:37:42:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 530 clock_counter_limit 81, no check, skip. 2020-12-24 21:37:45:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. chain 0 domain 0: d0 0.381, d1 0.386, d2 0.403, d3 0.390, sum = 1.559570 chain 0 domain 1: d0 0.380, d1 0.385, d2 0.366, d3 0.361, sum = 1.491882 chain 0 domain 2: d0 0.385, d1 0.374, d2 0.373, d3 0.364, sum = 1.495483 chain 0 domain 3: d0 0.380, d1 0.371, d2 0.376, d3 0.365, sum = 1.492310 chain 0 domain 4: d0 0.385, d1 0.374, d2 0.379, d3 0.359, sum = 1.496399 chain 0 domain 5: d0 0.378, d1 0.383, d2 0.390, d3 0.346, sum = 1.497620 chain 0 domain 6: d0 0.380, d1 0.372, d2 0.374, d3 0.365, sum = 1.489929 chain 0 domain 7: d0 0.386, d1 0.368, d2 0.367, d3 0.371, sum = 1.491760 chain 0 domain 8: d0 0.377, d1 0.385, d2 0.379, d3 0.353, sum = 1.493591 chain 0 domain 9: d0 0.388, d1 0.376, d2 0.389, d3 0.343, sum = 1.496094 chain 0 domain 10: d0 0.384, d1 0.378, d2 0.362, d3 0.368, sum = 1.490845 chain 0 domain 11: d0 0.380, d1 0.385, d2 0.362, d3 0.366, sum = 1.493591 chain 0 domain 12: d0 0.369, d1 0.368, d2 0.367, d3 0.369, sum = 1.472595 2020-12-24 21:37:45:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.388, d1 0.394, d2 0.368, d3 0.355, sum = 1.504028 chain 1 domain 1: d0 0.398, d1 0.388, d2 0.411, d3 0.399, sum = 1.594849 chain 1 domain 2: d0 0.399, d1 0.387, d2 0.377, d3 0.387, sum = 1.550110 chain 1 domain 3: d0 0.387, d1 0.383, d2 0.370, d3 0.375, sum = 1.514893 chain 1 domain 4: d0 0.383, d1 0.379, d2 0.387, d3 0.355, sum = 1.504761 chain 1 domain 5: d0 0.379, d1 0.372, d2 0.374, d3 0.365, sum = 1.490784 chain 1 domain 6: d0 0.380, d1 0.379, d2 0.395, d3 0.357, sum = 1.511902 chain 1 domain 7: d0 0.378, d1 0.371, d2 0.372, d3 0.366, sum = 1.487000 chain 1 domain 8: d0 0.374, d1 0.372, d2 0.370, d3 0.370, sum = 1.486511 chain 1 domain 9: d0 0.383, d1 0.371, d2 0.384, d3 0.367, sum = 1.506287 chain 1 domain 10: d0 0.380, d1 0.369, d2 0.378, d3 0.362, sum = 1.488892 chain 1 domain 11: d0 0.382, d1 0.377, d2 0.374, d3 0.361, sum = 1.494202 chain 1 domain 12: d0 0.372, d1 0.369, d2 0.370, d3 0.370, sum = 1.481140 2020-12-24 21:37:46:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.385, d1 0.392, d2 0.374, d3 0.360, sum = 1.511475 chain 2 domain 1: d0 0.391, d1 0.376, d2 0.383, d3 0.383, sum = 1.534241 chain 2 domain 2: d0 0.383, d1 0.377, d2 0.389, d3 0.355, sum = 1.504578 chain 2 domain 3: d0 0.382, d1 0.374, d2 0.396, d3 0.384, sum = 1.536682 chain 2 domain 4: d0 0.381, d1 0.384, d2 0.382, d3 0.350, sum = 1.496094 chain 2 domain 5: d0 0.387, d1 0.371, d2 0.399, d3 0.341, sum = 1.497864 chain 2 domain 6: d0 0.376, d1 0.373, d2 0.370, d3 0.372, sum = 1.490417 chain 2 domain 7: d0 0.372, d1 0.360, d2 0.372, d3 0.356, sum = 1.460205 chain 2 domain 8: d0 0.374, d1 0.369, d2 0.384, d3 0.370, sum = 1.496521 chain 2 domain 9: d0 0.381, d1 0.368, d2 0.376, d3 0.366, sum = 1.491089 chain 2 domain 10: d0 0.384, d1 0.381, d2 0.354, d3 0.372, sum = 1.491394 chain 2 domain 11: d0 0.386, d1 0.382, d2 0.396, d3 0.388, sum = 1.551392 chain 2 domain 12: d0 0.372, d1 0.370, d2 0.370, d3 0.371, sum = 1.482605 2020-12-24 21:37:46:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:37:46:frequency.c:717:inc_freq_with_fixed_step: chain = 0, freq_start = 530, freq_end = 540, freq_step = 5, is_higher_voltage = true 2020-12-24 21:37:46:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 535 clock_counter_limit 82, no check, skip. 2020-12-24 21:37:48:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 540 clock_counter_limit 83, no check, skip. 2020-12-24 21:37:50:frequency.c:717:inc_freq_with_fixed_step: chain = 1, freq_start = 530, freq_end = 540, freq_step = 5, is_higher_voltage = true 2020-12-24 21:37:50:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 535 clock_counter_limit 82, no check, skip. 2020-12-24 21:37:52:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 540 clock_counter_limit 83, no check, skip. 2020-12-24 21:37:54:frequency.c:717:inc_freq_with_fixed_step: chain = 0, freq_start = 540, freq_end = 540, freq_step = 5, is_higher_voltage = true 2020-12-24 21:37:54:frequency.c:717:inc_freq_with_fixed_step: chain = 1, freq_start = 540, freq_end = 540, freq_step = 5, is_higher_voltage = true 2020-12-24 21:37:54:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1950, step by step. 2020-12-24 21:38:06:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout. chain 0 domain 0: d0 0.378, d1 0.384, d2 0.353, d3 0.376, sum = 1.490723 chain 0 domain 1: d0 0.376, d1 0.377, d2 0.363, d3 0.375, sum = 1.491699 chain 0 domain 2: d0 0.374, d1 0.381, d2 0.354, d3 0.362, sum = 1.470337 chain 0 domain 3: d0 0.371, d1 0.363, d2 0.363, d3 0.370, sum = 1.465454 chain 0 domain 4: d0 0.373, d1 0.369, d2 0.373, d3 0.368, sum = 1.483276 chain 0 domain 5: d0 0.370, d1 0.365, d2 0.363, d3 0.384, sum = 1.482361 chain 0 domain 6: d0 0.372, d1 0.378, d2 0.359, d3 0.355, sum = 1.462646 chain 0 domain 7: d0 0.374, d1 0.374, d2 0.366, d3 0.349, sum = 1.463135 chain 0 domain 8: d0 0.369, d1 0.363, d2 0.380, d3 0.350, sum = 1.461731 chain 0 domain 9: d0 0.378, d1 0.360, d2 0.371, d3 0.381, sum = 1.489319 chain 0 domain 10: d0 0.369, d1 0.376, d2 0.374, d3 0.351, sum = 1.470337 chain 0 domain 11: d0 0.373, d1 0.378, d2 0.370, d3 0.362, sum = 1.482605 chain 0 domain 12: d0 0.360, d1 0.358, d2 0.357, d3 0.358, sum = 1.434143 2020-12-24 21:38:06:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.383, d1 0.370, d2 0.367, d3 0.378, sum = 1.497375 chain 1 domain 1: d0 0.388, d1 0.381, d2 0.380, d3 0.383, sum = 1.530823 chain 1 domain 2: d0 0.383, d1 0.377, d2 0.383, d3 0.378, sum = 1.520691 chain 1 domain 3: d0 0.371, d1 0.377, d2 0.371, d3 0.355, sum = 1.473389 chain 1 domain 4: d0 0.376, d1 0.378, d2 0.369, d3 0.361, sum = 1.483948 chain 1 domain 5: d0 0.370, d1 0.364, d2 0.363, d3 0.364, sum = 1.460449 chain 1 domain 6: d0 0.370, d1 0.369, d2 0.372, d3 0.361, sum = 1.471741 chain 1 domain 7: d0 0.367, d1 0.362, d2 0.359, d3 0.361, sum = 1.449097 chain 1 domain 8: d0 0.364, d1 0.362, d2 0.362, d3 0.363, sum = 1.451599 chain 1 domain 9: d0 0.369, d1 0.365, d2 0.366, d3 0.368, sum = 1.467834 chain 1 domain 10: d0 0.364, d1 0.362, d2 0.362, d3 0.384, sum = 1.472107 chain 1 domain 11: d0 0.372, d1 0.364, d2 0.367, d3 0.369, sum = 1.472961 chain 1 domain 12: d0 0.363, d1 0.360, d2 0.360, d3 0.362, sum = 1.444519 2020-12-24 21:38:07:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.375, d1 0.383, d2 0.379, d3 0.350, sum = 1.487793 chain 2 domain 1: d0 0.376, d1 0.382, d2 0.358, d3 0.380, sum = 1.496216 chain 2 domain 2: d0 0.375, d1 0.370, d2 0.388, d3 0.355, sum = 1.487549 chain 2 domain 3: d0 0.372, d1 0.365, d2 0.371, d3 0.378, sum = 1.485901 chain 2 domain 4: d0 0.373, d1 0.369, d2 0.370, d3 0.381, sum = 1.492249 chain 2 domain 5: d0 0.372, d1 0.364, d2 0.375, d3 0.360, sum = 1.471802 chain 2 domain 6: d0 0.368, d1 0.362, d2 0.361, d3 0.386, sum = 1.477905 chain 2 domain 7: d0 0.359, d1 0.354, d2 0.350, d3 0.391, sum = 1.454773 chain 2 domain 8: d0 0.365, d1 0.363, d2 0.379, d3 0.349, sum = 1.455872 chain 2 domain 9: d0 0.369, d1 0.376, d2 0.376, d3 0.351, sum = 1.472229 chain 2 domain 10: d0 0.370, d1 0.378, d2 0.360, d3 0.360, sum = 1.467285 chain 2 domain 11: d0 0.378, d1 0.385, d2 0.379, d3 0.348, sum = 1.489929 chain 2 domain 12: d0 0.363, d1 0.361, d2 0.361, d3 0.362, sum = 1.447632 2020-12-24 21:38:07:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2020-12-24 21:38:07:frequency.c:442:inc_asic_diff_freq_by_steps: chain = 0, start = 540, freq_step = 5 2020-12-24 21:38:16:frequency.c:442:inc_asic_diff_freq_by_steps: chain = 1, start = 540, freq_step = 5 2020-12-24 21:38:24:frequency.c:442:inc_asic_diff_freq_by_steps: chain = 2, start = 530, freq_step = 5 2020-12-24 21:38:31:driver-btm-api.c:666:set_timeout: freq = 600, percent = 90, hcn = 707788, timeout = 1178 2020-12-24 21:38:31:frequency.c:1026:check_initial_temperature_status: vol_higher= 1910, vol_limit = 1960 when max freq = 600, bringup temp = 8 2020-12-24 21:38:31:power_api.c:278:set_higher_voltage_raw: higher_voltage_raw = 1910 2020-12-24 21:38:31:power_api.c:370:set_to_higher_voltage_by_steps: Set to voltage raw 1910, step by step. 2020-12-24 21:38:41:thread.c:1533:create_check_system_status_thread: create thread 2020-12-24 21:38:41:thread.c:1508:create_asic_status_monitor_thread: create thread 2020-12-24 21:38:41:driver-btm-api.c:2599:bitmain_soc_init: Init done! 2020-12-24 21:38:46:driver-btm-api.c:247:set_miner_status: STATUS_OKAY 2020-12-24 21:38:47:frequency.c:107:get_ideal_hash_rate_GH: ideal_hash_rate = 51242 2020-12-24 21:38:47:frequency.c:128:get_sale_hash_rate_GH: sale_hash_rate = 50000 2020-12-24 21:38:51:driver-btm-api.c:1634:dhash_chip_send_job: Version num 8 2020-12-24 21:38:51:driver-btm-api.c:1778:dhash_chip_send_job: stime.tv_sec 1608845931, block_ntime 1608845901 2020-12-24 22:09:14:thread.c:234:calc_hashrate_avg: avg rate is 51385.73 in 30 mins 2020-12-24 22:09:14:temperature.c:440:temp_statistics_show: pcb temp 15~67 chip temp 26~90 2020-12-24 22:09:14:thread.c:303:is_temp_reopen_core: current PCB min temperature(15) is too low, <= 15 2020-12-24 22:10:51:thread.c:849:check_temperature: over max temp, pcb temp 68 (max 80), chip temp 99(max 98) 2020-12-24 22:10:51:driver-btm-api.c:247:set_miner_status: ERROR_TEMP_TOO_HIGH 2020-12-24 22:10:51:driver-btm-api.c:176:stop_mining: stop mining: over max temp 2020-12-24 22:10:51:thread.c:1575:cancel_temperature_monitor_thread: cancel thread 2020-12-24 22:10:51:thread.c:1606:cancel_check_system_status_thread: cancel thread 2020-12-24 22:10:51:thread.c:1595:cancel_read_nonce_reg_thread: cancel thread 2020-12-24 22:10:51:thread.c:1616:cancel_asic_status_monitor_thread: cancel thread 2020-12-24 22:10:51:driver-btm-api.c:147:killall_hashboard: ****power off hashboard****
full log: https://paste.ubuntu.com/p/7JxvWyH2TY/
Title: Re: one hashboard is 91 Degree
Post by: BitMaxz on December 24, 2020, 11:03:59 PM
That's abnormal mostly I see around 32 degrees stable and running. And look at the last log it stops mining due to overheating there might be something inside of the miner, the heatsinks may not be attached/glued properly that's why some of the ASICS are showing abnormal temp.
Why not run only 1 hashboard to know which one is a chain[0],[1],[2] you can run them one by one. Get some idea on how to run them one by one from here Test hash board one by one (https://support.bitmain.com/hc/en-us/articles/226142788-Test-hash-board-one-by-one)
Or try to disassemble the unit and the check those heatsinks.
Title: Re: one hashboard is 91 Degree
Post by: Steamtyme on December 25, 2020, 05:44:48 AM
How long have you had it? When was the last time it was cleaned. It's easy enough to pop the fans off a machine and look through with a flashlight for any blockage. Give it a blow through with a can of compressed air if you see any blockages that aren't heatsinks that have fallen off.
If it's heatsinks or a damaged board you're gonna have to weigh your costs and/or decide if you can sort it out yourself. Sort of comes down to what it's going to cost to get it repaired (shipping, labor, parts) and what you expect to earn with that extra board mining. Without it the machine would still run but at reduced earnings and power consumption. If you think in the lifetime of the machine the repair will more than pay for itself, than definitely explore your repair options.
Title: Re: one hashboard is 91 Degree
Post by: mikeywith on December 25, 2020, 07:49:52 PM
It's chain 1, aka the middle chain that is throwing the over temp error, it's usual for the middle board to run slightly warmer, but not as hot as it does in your miner, I also noticed that the variance in temperature based on the sensor location is HUGE, even on the other two chains, your temps are all over the place.
Hot, Cold, Hot, Cold, and the fans are spinning at over 6000rpm which is just about that maximum, I believe that something is blocking the overflow of the bottom part of the miner, the 4 sensors are located near the 4 corners, so you have 2 on the upper side and 2 on the lower side, and since ALL of the 12 sensors show the same readings, it looks like something is keeping the air follow too low on one of the sides.
|