Title: Antminer S9 troubleshooting?
Post by: PNW_Steve on January 11, 2021, 07:23:02 PM
Hello Everyone.
I am just getting my feet wet in the mining process. To get started I snagged a couple of old S9's and built a small GPU rig. Just trying to get educated. Time for some education.....This morning I noticed that one of the S9's had stopped processing. One of the three "chains" was showing zero hash and my NiceHash monitor was showing no work. After a bit of poking around and a couple of reboots I was looking at the kernel log and see what may be an indication of the problem. Hopefully we have an Antminer Guru in the house.... Here is a snipet from the log:
Well...... I have lost my clipboard...... And, the last reboot cleared the log. The machine is running now....
I hate it when issues appear and then mysteriously heal themselves. I would rather find something broken and fix it. That leaves me with at least a little confidence that the problem is actually fixed. My sense of urgency has passed but I would still have someone look over my logs and let me know if anything is amiss. Any volunteers? :) :)
Any input is appreciated.
S.
PS: Gotta love the Antminers this time of year. I can work out here without a heavy jacket now. :)
Title: Re: Antminer S9 troubleshooting?
Post by: philipma1957 on January 11, 2021, 07:31:27 PM
No logs = No guesses
but it could be internet drop out from nicehash and have zero to do with your end.
Title: Re: Antminer S9 troubleshooting?
Post by: PNW_Steve on January 12, 2021, 04:28:29 PM
Thanks for the input. I have two of them connected to the same network switch. Same Internet connection. The failing unit stopped mining again at 2:00am this morning. I can't access it from here but will endeavor to get logs later this morning.
When I arrived and connected to the S9 it appeared to be running(shows hash rate on 3 boards) but the fault light is on and NiceHash shows connected but zero work since around 2:00am. I collected the logs at 10:00am. Any input is appreciated. Well, I was going to attach a txt file to my post but either it is not allowed or I am not smart enough to figure it out. Sorry for the novel. [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884108K/1032192K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 148084K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000292] ps7-ttc #0 at f0006000, irq=43
[ 0.000595] Console: colour dummy device 80x30
[ 0.000631] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040199] pid_max: default: 32768 minimum: 301
[ 0.040411] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040431] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042587] CPU: Testing write buffer coherency: ok
[ 0.042910] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042966] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.043186] L310 cache controller enabled
[ 0.043206] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120987] CPU1: Booted secondary processor
[ 0.210221] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210348] Brought up 2 CPUs
[ 0.210367] SMP: Total of 2 processors activated.
[ 0.210375] CPU: All CPU(s) started in SVC mode.
[ 0.211033] devtmpfs: initialized
[ 0.213452] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214634] regulator-dummy: no parameters
[ 0.221986] NET: Registered protocol family 16
[ 0.224203] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226455] cpuidle: using governor ladder
[ 0.226469] cpuidle: using governor menu
[ 0.233795] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235297] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235311] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235421] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.257037] bio: create slab <bio-0> at 0
[ 0.258393] vgaarb: loaded
[ 0.259086] SCSI subsystem initialized
[ 0.259934] usbcore: registered new interface driver usbfs
[ 0.260117] usbcore: registered new interface driver hub
[ 0.260335] usbcore: registered new device driver usb
[ 0.260888] media: Linux media interface: v0.10
[ 0.261168] Linux video capture interface: v2.00
[ 0.261719] pps_core: LinuxPPS API ver. 1 registered
[ 0.261732] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.261858] PTP clock support registered
[ 0.262213] EDAC MC: Ver: 3.0.0
[ 0.263397] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266110] DMA-API: preallocated 4096 debug entries
[ 0.266123] DMA-API: debugging enabled by kernel config
[ 0.266189] Switched to clocksource arm_global_timer
[ 0.286144] NET: Registered protocol family 2
[ 0.286854] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.286950] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.287108] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.287178] TCP: reno registered
[ 0.287196] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287245] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287502] NET: Registered protocol family 1
[ 0.287850] RPC: Registered named UNIX socket transport module.
[ 0.287862] RPC: Registered udp transport module.
[ 0.287870] RPC: Registered tcp transport module.
[ 0.287878] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.287890] PCI: CLS 0 bytes, default 64
[ 0.288315] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290301] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.291634] bounce pool size: 64 pages
[ 0.292487] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.292693] msgmni has been set to 1486
[ 0.293455] io scheduler noop registered
[ 0.293468] io scheduler deadline registered
[ 0.293507] io scheduler cfq registered (default)
[ 0.305603] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.305623] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.428289] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.000281] console [ttyPS0] enabled
[ 1.004530] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.012179] [drm] Initialized drm 1.1.0 20060810
[ 1.029234] brd: module loaded
[ 1.038589] loop: module loaded
[ 1.048315] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.054063] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.061872] libphy: XEMACPS mii bus: probed
[ 1.066307] ------------- phy_id = 0x3625e62
[ 1.071050] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.079706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.086352] ehci-pci: EHCI PCI platform driver
[ 1.093561] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.100398] usbcore: registered new interface driver usb-storage
[ 1.107245] mousedev: PS/2 mouse device common for all mice
[ 1.113317] i2c /dev entries driver
[ 1.120254] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.125730] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.131654] Xilinx Zynq CpuIdle Driver started
[ 1.136640] sdhci: Secure Digital Host Controller Interface driver
[ 1.142737] sdhci: Copyright(c) Pierre Ossman
[ 1.147097] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.153881] mmc0: no vqmmc regulator found
[ 1.157926] mmc0: no vmmc regulator found
[ 1.196228] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.204896] usbcore: registered new interface driver usbhid
[ 1.210406] usbhid: USB HID core driver
[ 1.215100] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.221389] nand: Micron MT29F2G08ABAEAWP
[ 1.225365] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.231311] Bad block table found at page 131008, version 0x01
[ 1.237540] Bad block table found at page 130944, version 0x01
[ 1.243597] 3 ofpart partitions found on MTD device pl353-nand
[ 1.249375] Creating 3 MTD partitions on "pl353-nand":
[ 1.254478] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.262534] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.269861] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.280588] TCP: cubic registered
[ 1.283826] NET: Registered protocol family 17
[ 1.288517] Registering SWP/SWPB emulation handler
[ 1.294373] regulator-dummy: disabling
[ 1.298664] UBI: attaching mtd1 to ubi0
[ 1.824991] UBI: scanning is finished
[ 1.836629] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.843685] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.850471] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.857157] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.863995] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.870006] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.877116] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 347537888
[ 1.886043] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.895274] UBI: background thread "ubi_bgt0d" started, PID 1084
[ 1.895280] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.899207] ALSA device list:
[ 1.899211] No soundcards found.
[ 1.915545] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[ 1.944675] UBIFS: recovery needed
[ 2.014160] UBIFS: recovery completed
[ 2.017846] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.023769] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.032901] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.042793] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.047858] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 6DB0ADD6-21CD-4224-902F-9EE5F976D1A6, small LPT model
[ 2.059344] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.066765] devtmpfs: mounted
[ 2.069870] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 2.912742] random: dd urandom read with 1 bits of entropy available
[ 3.296231]
[ 3.296231] bcm54xx_config_init
[ 3.906232]
[ 3.906232] bcm54xx_config_init
[ 6.907062] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.913149] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 19.521327] In axi fpga driver!
[ 19.524397] request_mem_region OK!
[ 19.527813] AXI fpga dev virtual address is 0xf0200000
[ 19.532897] *base_vir_addr = 0xc51e
[ 19.548341] In fpga mem driver!
[ 19.551410] request_mem_region OK!
[ 19.554978] fpga mem virtual address is 0xf3000000
[ 20.335608]
[ 20.335608] bcm54xx_config_init
[ 20.965546]
[ 20.965546] bcm54xx_config_init
[ 23.966077] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 23.972094] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 1855.934395] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram: 1039753216
Detect 1GB control board of XILINX
mmap axi_fpga_addr = 0xb6fa0000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5d99000
forceFreq=-1 forceFlag=0
min work minertest[0]:912
DETECT HW version=0000c51e
miner ID : 80280c09207b885c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[5] has core num=1
Chain[6] ASIC[44] has core num=2
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[7] has core num=1
Chain[7] ASIC[10] has core num=4
Chain[7] ASIC[35] has core num=2
Chain[7] ASIC[44] has core num=1
Chain[7] ASIC[46] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=57 on chain[5], value=910
get PIC voltage=6 on chain[6], value=940
get PIC voltage=91 on chain[7], value=890
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1381 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 2104 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=16199 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=16448 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=16469 root 0:00 sh -c ps -ef|grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Wed Dec 5 15:12:44 CST 2018 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80280c09207b885c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[4] speed=5640
get fan[4] speed=5640
get fan[4] speed=5640
get fan[5] speed=6000
get fan[4] speed=5640
get fan[5] speed=6000
get fan[4] speed=5640
get fan[5] speed=6000
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=910
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=57 value=910
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J7] has core num in PIC
Chain[J7] ASIC[5] has core num=1
Chain[J7] ASIC[44] has core num=2
Chain[J8] has core num in PIC
Chain[J8] ASIC[7] has core num=1
Chain[J8] ASIC[10] has core num=4
Chain[J8] ASIC[35] has core num=2
Chain[J8] ASIC[44] has core num=1
Chain[J8] ASIC[46] has core num=2
miner total rate=13450GH/s fixed rate=13000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:5 max freq=606
Chain:5 min freq=606
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:5 max freq=606
Chain:5 min freq=606
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:612 Asic[ 8]:612
Asic[ 9]:612 Asic[10]:612 Asic[11]:612 Asic[12]:612 Asic[13]:612 Asic[14]:612 Asic[15]:612 Asic[16]:612
Asic[17]:612 Asic[18]:612 Asic[19]:612 Asic[20]:612 Asic[21]:612 Asic[22]:612 Asic[23]:612 Asic[24]:612
Asic[25]:612 Asic[26]:612 Asic[27]:612 Asic[28]:612 Asic[29]:612 Asic[30]:612 Asic[31]:612 Asic[32]:612
Asic[33]:612 Asic[34]:612 Asic[35]:612 Asic[36]:612 Asic[37]:612 Asic[38]:612 Asic[39]:612 Asic[40]:612
Asic[41]:612 Asic[42]:612 Asic[43]:612 Asic[44]:612 Asic[45]:612 Asic[46]:612 Asic[47]:612 Asic[48]:612
Asic[49]:612 Asic[50]:612 Asic[51]:612 Asic[52]:612 Asic[53]:612 Asic[54]:612 Asic[55]:612 Asic[56]:612
Asic[57]:612 Asic[58]:612 Asic[59]:612 Asic[60]:612 Asic[61]:612 Asic[62]:612
Chain:6 max freq=612
Chain:6 min freq=606
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:612
Asic[ 1]:612 Asic[ 2]:612 Asic[ 3]:612 Asic[ 4]:612 Asic[ 5]:612 Asic[ 6]:612 Asic[ 7]:612 Asic[ 8]:612
Asic[ 9]:612 Asic[10]:612 Asic[11]:612 Asic[12]:612 Asic[13]:612 Asic[14]:612 Asic[15]:612 Asic[16]:612
Asic[17]:612 Asic[18]:612 Asic[19]:612 Asic[20]:612 Asic[21]:612 Asic[22]:612 Asic[23]:612 Asic[24]:612
Asic[25]:612 Asic[26]:612 Asic[27]:612 Asic[28]:612 Asic[29]:612 Asic[30]:612 Asic[31]:612 Asic[32]:612
Asic[33]:612 Asic[34]:612 Asic[35]:612 Asic[36]:612 Asic[37]:612 Asic[38]:612 Asic[39]:612 Asic[40]:612
Asic[41]:612 Asic[42]:612 Asic[43]:612 Asic[44]:612 Asic[45]:612 Asic[46]:612 Asic[47]:612 Asic[48]:612
Asic[49]:612 Asic[50]:612 Asic[51]:612 Asic[52]:612 Asic[53]:612 Asic[54]:612 Asic[55]:612 Asic[56]:612
Asic[57]:612 Asic[58]:612 Asic[59]:612 Asic[60]:612 Asic[61]:612 Asic[62]:618
Chain:7 max freq=618
Chain:7 min freq=612
max freq = 618
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:29 remote:0 offset:59
Chain[J6] chip[244] get middle temp offset=59 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:28 remote:30 offset:28
Chain[J7] chip[244] get middle temp offset=28 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:28 remote:30 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
single board rate=4352 voltage limit=910 on chain[5]
get PIC voltage=910 on chain[5], check: must be < 910
retryFlag=1 will set the voltage limited on chain[5], change voltage=910
now set pic voltage=57 on chain[5]
single board rate=4388 voltage limit=910 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 910
retryFlag=1 will set the voltage limited on chain[6], change voltage=910
now set pic voltage=57 on chain[6]
single board rate=4389 voltage limit=910 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 910
retryFlag=1 will set the voltage limited on chain[7], change voltage=910
now set pic voltage=57 on chain[7]
Chain[J6] set working voltage=910 [57]
Chain[J7] set working voltage=910 [57]
Chain[J8] set working voltage=910 [57]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=908 asic[01]=908 asic[02]=906 asic[03]=907 asic[04]=907 asic[05]=907 asic[06]=907 asic[07]=907
asic[08]=908 asic[09]=908 asic[10]=908 asic[11]=908 asic[12]=908 asic[13]=908 asic[14]=908 asic[15]=908
asic[16]=908 asic[17]=908 asic[18]=908 asic[19]=908 asic[20]=907 asic[21]=907 asic[22]=908 asic[23]=908
asic[24]=908 asic[25]=907 asic[26]=908 asic[27]=908 asic[28]=908 asic[29]=908 asic[30]=906 asic[31]=906
asic[32]=907 asic[33]=907 asic[34]=907 asic[35]=906 asic[36]=906 asic[37]=906 asic[38]=906 asic[39]=904
asic[40]=906 asic[41]=905 asic[42]=906 asic[43]=905 asic[44]=905 asic[45]=906 asic[46]=906 asic[47]=906
asic[48]=907 asic[49]=907 asic[50]=907 asic[51]=907 asic[52]=907 asic[53]=905 asic[54]=907 asic[55]=907
asic[56]=907 asic[57]=906 asic[58]=907 asic[59]=907 asic[60]=907 asic[61]=907 asic[62]=907
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[00]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[01]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[02]=906
core[042]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[03]=907
core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[04]=907
core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[05]=907
core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[06]=907
core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[07]=907
core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[08]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[09]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[10]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[11]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[12]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[13]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[14]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[15]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[16]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[17]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[18]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[19]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[20]=907
core[024]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[21]=907
core[045]=7 core[046]=7 core[047]=7 core[048]=7 core[097]=7
asic[22]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[23]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[24]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[25]=907
core[024]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[26]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[27]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[28]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[29]=908
core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[30]=906
core[000]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[31]=906
core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7 core[104]=7
asic[32]=907
core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[33]=907
core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[34]=907
core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[35]=906
core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7 core[104]=7
asic[36]=906
core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7 core[060]=7
asic[37]=906
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[38]=906
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[39]=904
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7 core[104]=7 core[105]=7
asic[40]=906
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[41]=905
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7 core[104]=7
asic[42]=906
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[43]=905
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7 core[105]=7
asic[44]=905
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7 core[105]=7
asic[45]=906
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[46]=906
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[47]=906
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[048]=7
asic[48]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[49]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[50]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[51]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[52]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[53]=905
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[104]=7 core[105]=7
asic[54]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[55]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[56]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[57]=906
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7 core[104]=7
asic[58]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[59]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[60]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[61]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
asic[62]=907
core[043]=7 core[044]=7 core[045]=7 core[046]=7 core[047]=7
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57138
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25300
last_nonce_num:238741
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=612
freq[08]=612 freq[09]=612 freq[10]=612 freq[11]=612 freq[12]=612 freq[13]=612 freq[14]=612 freq[15]=612
freq[16]=612 freq[17]=612 freq[18]=612 freq[19]=612 freq[20]=612 freq[21]=612 freq[22]=612 freq[23]=612
freq[24]=612 freq[25]=612 freq[26]=612 freq[27]=612 freq[28]=612 freq[29]=612 freq[30]=612 freq[31]=612
freq[32]=612 freq[33]=612 freq[34]=612 freq[35]=612 freq[36]=612 freq[37]=612 freq[38]=612 freq[39]=612
freq[40]=612 freq[41]=612 freq[42]=612 freq[43]=612 freq[44]=612 freq[45]=612 freq[46]=612 freq[47]=612
freq[48]=612 freq[49]=612 freq[50]=612 freq[51]=612 freq[52]=612 freq[53]=612 freq[54]=612 freq[55]=612
freq[56]=612 freq[57]=612 freq[58]=612 freq[59]=612 freq[60]=612 freq[61]=612 freq[62]=612
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25118
last_nonce_num:59216
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=910 asic[02]=912 asic[03]=911 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=910 asic[11]=911 asic[12]=912 asic[13]=911 asic[14]=911 asic[15]=911
asic[16]=912 asic[17]=910 asic[18]=912 asic[19]=910 asic[20]=911 asic[21]=912 asic[22]=911 asic[23]=911
asic[24]=912 asic[25]=909 asic[26]=912 asic[27]=912 asic[28]=911 asic[29]=912 asic[30]=911 asic[31]=910
asic[32]=910 asic[33]=912 asic[34]=911 asic[35]=912 asic[36]=908 asic[37]=910 asic[38]=911 asic[39]=912
asic[40]=911 asic[41]=911 asic[42]=910 asic[43]=911 asic[44]=910 asic[45]=912 asic[46]=912 asic[47]=910
asic[48]=910 asic[49]=910 asic[50]=912 asic[51]=910 asic[52]=912 asic[53]=911 asic[54]=910 asic[55]=912
asic[56]=910 asic[57]=912 asic[58]=912 asic[59]=910 asic[60]=911 asic[61]=911 asic[62]=910
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[01]=910
core[014]=7 core[042]=7
asic[03]=911
core[066]=7
asic[10]=910
core[019]=7 core[074]=7
asic[11]=911
core[022]=7
asic[13]=911
core[091]=7
asic[14]=911
core[010]=7
asic[15]=911
core[013]=7
asic[17]=910
core[076]=7 core[108]=7
asic[19]=910
core[012]=7 core[064]=7
asic[20]=911
core[094]=7
asic[22]=911
core[104]=7
asic[23]=911
core[092]=7
asic[25]=909
core[006]=7 core[016]=7 core[032]=7
asic[28]=911
core[024]=7
asic[30]=911
core[101]=7
asic[31]=910
core[061]=7 core[111]=7
asic[32]=910
core[008]=7 core[093]=7
asic[34]=911
core[049]=7
asic[36]=908
core[033]=7 core[070]=7 core[100]=7 core[112]=7
asic[37]=910
core[040]=7 core[110]=7
asic[38]=911
core[064]=7
asic[40]=911
core[048]=7
asic[41]=911
core[002]=7
asic[42]=910
core[077]=7 core[100]=7
asic[43]=911
core[077]=7
asic[44]=910
core[017]=7 core[030]=7
asic[47]=910
core[016]=7 core[076]=7
asic[48]=910
core[102]=7 core[108]=7
asic[49]=910
core[010]=7 core[095]=7
asic[51]=910
core[092]=7 core[097]=7
asic[53]=911
core[017]=7
asic[54]=910
core[001]=7 core[055]=7
asic[56]=910
core[049]=7 core[100]=7
asic[59]=910
core[010]=7 core[059]=7
asic[60]=911
core[047]=7
asic[61]=911
core[113]=7
asic[62]=910
core[074]=7 core[088]=7
freq[00]=612 freq[01]=612 freq[02]=612 freq[03]=612 freq[04]=612 freq[05]=612 freq[06]=612 freq[07]=612
freq[08]=612 freq[09]=612 freq[10]=612 freq[11]=612 freq[12]=612 freq[13]=612 freq[14]=612 freq[15]=612
freq[16]=612 freq[17]=612 freq[18]=612 freq[19]=612 freq[20]=612 freq[21]=612 freq[22]=612 freq[23]=612
freq[24]=612 freq[25]=612 freq[26]=612 freq[27]=612 freq[28]=612 freq[29]=612 freq[30]=612 freq[31]=612
freq[32]=612 freq[33]=612 freq[34]=612 freq[35]=612 freq[36]=612 freq[37]=612 freq[38]=612 freq[39]=612
freq[40]=612 freq[41]=612 freq[42]=612 freq[43]=612 freq[44]=612 freq[45]=612 freq[46]=612 freq[47]=612
freq[48]=612 freq[49]=612 freq[50]=612 freq[51]=612 freq[52]=612 freq[53]=612 freq[54]=612 freq[55]=612
freq[56]=612 freq[57]=612 freq[58]=612 freq[59]=612 freq[60]=612 freq[61]=612 freq[62]=618
total valid nonce number:57397
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25116
last_nonce_num:89857
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: FAILED!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=911 asic[22]=912 asic[23]=911
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=911 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[21]=911
core[057]=7
asic[23]=911
core[019]=7
asic[56]=911
core[051]=7
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57453
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:24869
last_nonce_num:243873
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=612
freq[08]=612 freq[09]=612 freq[10]=612 freq[11]=612 freq[12]=612 freq[13]=612 freq[14]=612 freq[15]=612
freq[16]=612 freq[17]=612 freq[18]=612 freq[19]=612 freq[20]=612 freq[21]=612 freq[22]=612 freq[23]=612
freq[24]=612 freq[25]=612 freq[26]=612 freq[27]=612 freq[28]=612 freq[29]=612 freq[30]=612 freq[31]=612
freq[32]=612 freq[33]=612 freq[34]=612 freq[35]=612 freq[36]=612 freq[37]=612 freq[38]=612 freq[39]=612
freq[40]=612 freq[41]=612 freq[42]=612 freq[43]=612 freq[44]=612 freq[45]=612 freq[46]=612 freq[47]=612
freq[48]=612 freq[49]=612 freq[50]=612 freq[51]=612 freq[52]=612 freq[53]=612 freq[54]=612 freq[55]=612
freq[56]=612 freq[57]=612 freq[58]=612 freq[59]=612 freq[60]=612 freq[61]=612 freq[62]=612
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25105
last_nonce_num:154355
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=911 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=911 asic[06]=912 asic[07]=911
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=908 asic[12]=911 asic[13]=911 asic[14]=911 asic[15]=910
asic[16]=911 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=910 asic[21]=910 asic[22]=912 asic[23]=910
asic[24]=912 asic[25]=911 asic[26]=910 asic[27]=912 asic[28]=911 asic[29]=912 asic[30]=911 asic[31]=910
asic[32]=911 asic[33]=909 asic[34]=912 asic[35]=911 asic[36]=911 asic[37]=912 asic[38]=912 asic[39]=909
asic[40]=912 asic[41]=911 asic[42]=910 asic[43]=912 asic[44]=912 asic[45]=911 asic[46]=911 asic[47]=912
asic[48]=911 asic[49]=911 asic[50]=910 asic[51]=912 asic[52]=911 asic[53]=912 asic[54]=911 asic[55]=911
asic[56]=911 asic[57]=910 asic[58]=911 asic[59]=911 asic[60]=912 asic[61]=911 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[01]=911
core[078]=7
asic[05]=911
core[063]=7
asic[07]=911
core[079]=7
asic[11]=908
core[003]=7 core[014]=7 core[026]=7 core[050]=7
asic[12]=911
core[043]=7
asic[13]=911
core[049]=7
asic[14]=911
core[099]=7
asic[15]=910
core[045]=7 core[049]=7
asic[16]=911
core[092]=7
asic[20]=910
core[024]=7 core[096]=7
asic[21]=910
core[019]=7 core[060]=7
asic[23]=910
core[022]=7 core[073]=7
asic[25]=911
core[030]=7
asic[26]=910
core[067]=7 core[080]=7
asic[28]=911
core[014]=7
asic[30]=911
core[026]=7
asic[31]=910
core[045]=7 core[054]=7
asic[32]=911
core[108]=7
asic[33]=909
core[059]=7 core[075]=7 core[076]=7
asic[35]=911
core[055]=7
asic[36]=911
core[004]=7
asic[39]=909
core[029]=7 core[095]=7 core[102]=7
asic[41]=911
core[070]=7
asic[42]=910
core[057]=7 core[087]=7
asic[45]=911
core[083]=7
asic[46]=911
core[076]=7
asic[48]=911
core[070]=7
asic[49]=911
core[091]=7
asic[50]=910
core[002]=7 core[103]=7
asic[52]=911
core[029]=7
asic[54]=911
core[015]=7
asic[55]=911
core[048]=7
asic[56]=911
core[068]=7
asic[57]=910
core[010]=7 core[088]=7
asic[58]=911
core[020]=7
asic[59]=911
core[067]=7
asic[61]=911
core[108]=7
freq[00]=612 freq[01]=612 freq[02]=612 freq[03]=612 freq[04]=612 freq[05]=612 freq[06]=612 freq[07]=612
freq[08]=612 freq[09]=612 freq[10]=612 freq[11]=612 freq[12]=612 freq[13]=612 freq[14]=612 freq[15]=612
freq[16]=612 freq[17]=612 freq[18]=612 freq[19]=612 freq[20]=612 freq[21]=612 freq[22]=612 freq[23]=612
freq[24]=612 freq[25]=612 freq[26]=612 freq[27]=612 freq[28]=612 freq[29]=612 freq[30]=612 freq[31]=612
freq[32]=612 freq[33]=612 freq[34]=612 freq[35]=612 freq[36]=612 freq[37]=612 freq[38]=612 freq[39]=612
freq[40]=612 freq[41]=612 freq[42]=612 freq[43]=612 freq[44]=612 freq[45]=612 freq[46]=612 freq[47]=612
freq[48]=612 freq[49]=612 freq[50]=612 freq[51]=612 freq[52]=612 freq[53]=612 freq[54]=612 freq[55]=612
freq[56]=612 freq[57]=612 freq[58]=612 freq[59]=612 freq[60]=612 freq[61]=612 freq[62]=618
Title: Re: Antminer S9 troubleshooting?
Post by: NotFuzzyWarm on January 12, 2021, 06:16:45 PM
PLEASE learn how to use the Forum correctly...
Use the # code function to put all that into a scrollable format.
Requested mods to fix that wall of text....
edit: don't know if mods or OP did it but fixed ;)
Title: Re: Antminer S9 troubleshooting?
Post by: PNW_Steve on January 12, 2021, 06:20:05 PM
So sorry. I am used to forums with more functionality. I am used to being able to post an attachment. Lacking that I did my best. Just not used to having to manually put code in post. I'll figure it out if I am here for a bit. It looks like the log got truncated. Here is the lower portion: read PIC voltage=910 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:7 max freq=606
Chain:7 min freq=600
Miner fix freq ...
read PIC voltage=910 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=606
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:5 max freq=606
Chain:5 min freq=600
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:6 max freq=606
Chain:6 min freq=600
read PIC voltage=910 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:7 max freq=606
Chain:7 min freq=600
max freq = 606
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:49 remote:49 offset:32
Chain[J6] chip[244] get middle temp offset=32 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:45 remote:46 offset:31
Chain[J7] chip[244] get middle temp offset=31 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:45 remote:46 offset:31
Chain[J8] chip[244] get middle temp offset=31 typeID=55
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Error: check_asic_reg 0x08 timeout
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
PCB temp>60 will set the voltage limited on chain[5], change voltage=910
PCB temp>60 now set pic voltage=57 on chain[5]
PCB temp>60 will set the voltage limited on chain[6], change voltage=910
PCB temp>60 now set pic voltage=57 on chain[6]
PCB temp>60 will set the voltage limited on chain[7], change voltage=910
PCB temp>60 now set pic voltage=57 on chain[7]
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
Chain[J6] has core num in PIC
Chain[J7] has core num in PIC
Chain[J7] ASIC[5] has core num=1
Chain[J7] ASIC[44] has core num=2
Chain[J8] has core num in PIC
Chain[J8] ASIC[7] has core num=1
Chain[J8] ASIC[10] has core num=4
Chain[J8] ASIC[35] has core num=2
Chain[J8] ASIC[44] has core num=1
Chain[J8] ASIC[46] has core num=2
miner total rate=13001GH/s fixed rate=13000GH/s
read PIC voltage=910 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=606
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:5 max freq=606
Chain:5 min freq=600
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:6 max freq=606
Chain:6 min freq=600
read PIC voltage=910 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:7 max freq=606
Chain:7 min freq=600
Miner fix freq ...
read PIC voltage=910 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=606
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:5 max freq=606
Chain:5 min freq=600
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Title: Re: Antminer S9 troubleshooting?
Post by: NotFuzzyWarm on January 12, 2021, 06:50:37 PM
Ja, as I recall there is is a 1k character limit to it. No matter what, far more readable now :)
Title: Re: Antminer S9 troubleshooting?
Post by: mikeywith on January 12, 2021, 11:15:00 PM
far more readable now :)
But missing a ton of important information. :D The only thing that seems strange in the small portion of the kernel log you posted is this Fatal Error: network connection lost!
But then you mentioned this but the fault light is on and NiceHash shows connected but zero work The worst "pool" to be troubleshooting a miner with is Nicehash, I suggest you switch to a proper pool at least until you figure out what is going on with the miner, use Viabtc as it's very stable for the most part, it might not be your taste but should at least give accurate results while you are troubleshooting. If you can't post the complete kernel log, use an external website and just paste the link here, I forgot the website the folks here use, but it's something like "pasteit" or "pastein", just google it.
Title: Re: Antminer S9 troubleshooting?
Post by: NotFuzzyWarm on January 13, 2021, 02:31:01 AM
Um, bulk of the log is here as their post #3 (https://bitcointalk.org/index.php?topic=5308672.msg56080810#msg56080810)
Title: Re: Antminer S9 troubleshooting?
Post by: mikeywith on January 13, 2021, 03:10:27 AM
Um, bulk of the log is here as their post #3 (https://bitcointalk.org/index.php?topic=5308672.msg56080810#msg56080810)
It's not complete either, while this kernel log seems strange ( it has a different structure) which could be the latest locked version which I am not familiar with, but this without a doubt isn't the full log, the kernel log can't stop at tunning or setting frequency/voltage. On a side yet related note, this kernel log puts in so many "extra" details, which means he might need to split it or use an external website to post it, one more thing is that he should leave the miner on for at least 30 minutes before attempting to copy it.
Title: Re: Antminer S9 troubleshooting?
Post by: PNW_Steve on January 17, 2021, 07:36:01 PM
No, it isn't complete.
I broke the log in two and posted the two halves separately. Posted the first half ok. Posted the second half and it disappeared. I posted it a second time and it disappeared again.
Turns out the mods don't want the latter half posted for you all to look at. I don't understand why?
Title: Re: Antminer S9 troubleshooting?
Post by: mikeywith on January 18, 2021, 01:13:59 AM
Turns out the mods don't want the latter half posted for you all to look at. I don't understand why?
Our mod is a bit heavy-handed, I don't think his intention was just for us not to look at your kernel log, he probably found that you were breaking one of the rules which says you can't have two consecutive posts within 24 hours, however, given that you are posting a kernel log, he should have let that slip, but well, just use an external website to post the complete kernel log, I found the website I was talking about in my other post it's https://pastebin.com/. Did you change to another pool?
|