|
Title: Assignment of 18 pin signal cable Post by: NewMiner2021 on January 21, 2021, 07:35:29 PM hello everyone
request for information can someone help me with the pin assignment of the 18 pin signal cable? on which pin which transmission takes place! Thanks in advance for your help! Title: Re: Assignment of 18 pin signal cable Post by: NotFuzzyWarm on January 21, 2021, 07:41:43 PM ::)
What cable and for what kind of miner.... They are all different... Title: Re: Assignment of 18 pin signal cable Post by: NewMiner2021 on January 22, 2021, 06:51:24 PM yes you are right :) so stupid I forgot
Antminer S19pro great do you have information for me? Title: Re: Assignment of 18 pin signal cable Post by: wndsnb on January 22, 2021, 07:25:50 PM Pretty sure it's identical to 17 series since I think the control boards are compatible, which is this:
https://i.imgur.com/Ra2Ixpc.png (https://i.imgur.com/Ra2Ixpc.png) Title: Re: Assignment of 18 pin signal cable Post by: NewMiner2021 on January 25, 2021, 12:45:39 PM great thank you that's great! do you also have information where which information is transmitted but most of the names are known, for example, pins A1, A2, A0 .... thank you and have a nice day. nobody can tell me the pin assignment where temperature, hash and other data are transferred? :( Title: Re: Assignment of 18 pin signal cable Post by: wndsnb on January 25, 2021, 01:50:26 PM RST, RXD, and TXD make up the serial connection to the ASIC chips.
SCL and SDA is the I2C interface to the PIC microcontroller, eeprom, and temperature sensors. It looks like A0, A1, and A2 are used to set the address of the eeprom and PIC on the I2C bus. |
