|
Title: New build and need some help Post by: heyscotttt on February 06, 2021, 04:26:47 PM Hi All, hoping someone can shed some light on this as I'm losing my mind. I am trying to run 4 3070's to mine Eth and just finished new build. When I have 1 GPU connected, after some tweaking I can get it to 55-60 MH/s, but when I connect the other 3 GPU's, I get roughly 10-13 mh/s on each of them.
Here's some screen shots. https://imgur.com/MVVhn9g with 1 gpu connected. https://imgur.com/HRUqO4d with 4 gpus https://imgur.com/0A2tRaa 4 gpu's https://imgur.com/b3CV5Xn 4 gpu's with overclocks. still only 70 mh/s total. https://imgur.com/GZqrwJU 2 gpu's with no over clocks.. Edit: 4 GPU's without overclock was getting about 11-12 mh/s or about 1/4 of a single gpu. Decided to try with 3 cards. Getting about 18ish mh/s without over clocks so essentially 1/3 of the single GPU and 2 gpu's connected is going 27 mh/s without overclocks. Any ideas would be greatly appreciated. Title: Re: New build and need some help Post by: OgNasty on February 06, 2021, 06:29:41 PM You'll have a lot more success finding help if you post this in the altcoin mining section. Beginners won't be able to help you so much and you should get used to posting things in the appropriate section. Good luck!
https://bitcointalk.org/index.php?board=160.0 |