Title: Power supply for canaan 1066 50t Post by: Dega84 on February 22, 2021, 08:01:36 PM Hi guys.
I bought a second hand AvalonMiner 1066 50t. I had known there would be no power supply cable. But I just to Confirm is it OK to buy and IEC C19 UPS / server power lead cable? I've ordered one on amazon: https://www.amazon.co.uk/LINDY-Mains-Plug-Power-Cable/dp/B01E1YRI9Q/. Could anyone kindly let me know if this is OK to use on this miner please. Cheers. Title: Re: Power supply for canaan 1066 50t Post by: NotFuzzyWarm on February 22, 2021, 08:22:43 PM Assuming that is the correct male plug end for your outlet, yes. The C19 end is what plugs into the miner.
Title: Re: Power supply for canaan 1066 50t Post by: MoritzH4T3 on February 23, 2021, 04:14:55 AM That will do the job just fine. How much did you pay for the Canaan 1066 50t if you don't mind me asking.
Title: Re: Power supply for canaan 1066 50t Post by: NotFuzzyWarm on February 24, 2021, 02:53:47 PM On re-read of the link, the only issue you might run into is that the ad says the male plug has a 13A fuse in it.
The A1066 50t is rated to pull 3,192w and assuming 220v that equates to 14.5A. You are going to need a larger fuse... Title: Re: Power supply for canaan 1066 50t Post by: Dega84 on June 21, 2021, 10:02:45 PM Sorry guys for the late reply.
Ended up getting a spark in to do 16a sockets. Which are great, your right the 1066 pulls far to much for a 13a fuse. Ended up burning out fuses, which wasn't good looking back. I think i paid around 1200-1300gbp at that time for a 2nd hand one, which is running perfect. Prices are simular at moment as BTC down, but for a while and in some miner price list they are still very expensive. Cheers guys for the responses Dega |