|
Title: a new mining setup... Post by: aliitp2 on March 11, 2021, 08:55:29 AM Hi Guys,
am still building my first mining RIG just wondering i got 1 of these currently and ordering some more from DIFFERENT BRAND (gpuminers.com) but my question regarding this: https://www.amazon.ae/gp/product/B08NTLGCVH/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 I think i will run out of PSU cables and ports to power all 5x risers and 3x 3060 Ti(s) + 2x 3070, So is it safe and fine to run this riser with the included sata port coz i got PLENTY of those... what should i do since i got only 8x PCI-E Headers available and i JUST bought this PSU today (silverstone 1200w) and i really like it ;D any advise appreciated... Title: Re: a new mining setup... Post by: XUR_TIP on March 11, 2021, 08:58:37 AM The riser is safe, it's same with what I'm using presently just make sure you don't draw power from the sata cable that come with the riser cos they are bad and can't handle high watt power, it can melt or even start fire
Title: Re: a new mining setup... Post by: skablast on March 11, 2021, 09:18:22 AM To be fair with you:
Isn't pretty but the normal solution is: Hp server PSU 1200 watt ( refurbished)+ 12 PCI Breakout board + cable for the card + a stupid PSU for powering just the risers. We pay electricity more than you do .... but on top its a very clean installation So, I will stop the order of the very nice but not so much pcie - happy psu. The riser is good , btw Title: Re: a new mining setup... Post by: aliitp2 on March 11, 2021, 02:21:50 PM To be fair with you: Isn't pretty but the normal solution is: Hp server PSU 1200 watt ( refurbished)+ 12 PCI Breakout board + cable for the card + a stupid PSU for powering just the risers. We pay electricity more than you do .... but on top its a very clean installation So, I will stop the order of the very nice but not so much pcie - happy psu. The riser is good , btw Am.only a beginner lol :D Thank you though,,, Title: Re: a new mining setup... Post by: aliitp2 on March 11, 2021, 02:23:27 PM To be fair with you: Isn't pretty but the normal solution is: Hp server PSU 1200 watt ( refurbished)+ 12 PCI Breakout board + cable for the card + a stupid PSU for powering just the risers. We pay electricity more than you do .... but on top its a very clean installation So, I will stop the order of the very nice but not so much pcie - happy psu. The riser is good , btw Wow :o :o :o I have another question I already ordered the ones from gpurisers.com they run with molex or 6 pin Can I use the molex coz I have MANY free.molex available... Any advise appreciated... Thanks, Title: Re: a new mining setup... Post by: CrossroadBTC on March 11, 2021, 06:32:54 PM To be fair with you: Isn't pretty but the normal solution is: Hp server PSU 1200 watt ( refurbished)+ 12 PCI Breakout board + cable for the card + a stupid PSU for powering just the risers. We pay electricity more than you do .... but on top its a very clean installation So, I will stop the order of the very nice but not so much pcie - happy psu. The riser is good , btw Wow :o :o :o I have another question I already ordered the ones from gpurisers.com they run with molex or 6 pin Can I use the molex coz I have MANY free.molex available... Any advise appreciated... Thanks, Title: Re: a new mining setup... Post by: aliitp2 on March 12, 2021, 01:13:44 AM To be fair with you: Isn't pretty but the normal solution is: Hp server PSU 1200 watt ( refurbished)+ 12 PCI Breakout board + cable for the card + a stupid PSU for powering just the risers. We pay electricity more than you do .... but on top its a very clean installation So, I will stop the order of the very nice but not so much pcie - happy psu. The riser is good , btw Wow :o :o :o I have another question I already ordered the ones from gpurisers.com they run with molex or 6 pin Can I use the molex coz I have MANY free.molex available... Any advise appreciated... Thanks, I was referring to the normal molex cable 4 pin I believe https://images.app.goo.gl/zQhqujdX6KM5Cr1Y7 Is it safe ? And how to know how much amps it can support ? Thanks, Title: Re: a new mining setup... Post by: joseph32 on March 12, 2021, 01:45:36 AM Here are all the wattages of the 3 cables:
https://www.gpuminingresources.com/p/psu-cables.html Title: Re: a new mining setup... Post by: batsonxl on March 12, 2021, 05:21:17 AM To be fair with you: Isn't pretty but the normal solution is: Hp server PSU 1200 watt ( refurbished)+ 12 PCI Breakout board + cable for the card + a stupid PSU for powering just the risers. We pay electricity more than you do .... but on top its a very clean installation So, I will stop the order of the very nice but not so much pcie - happy psu. The riser is good , btw Wow :o :o :o I have another question I already ordered the ones from gpurisers.com they run with molex or 6 pin Can I use the molex coz I have MANY free.molex available... Any advise appreciated... Thanks, Title: Re: a new mining setup... Post by: fmz89 on March 12, 2021, 01:45:55 PM Hi Guys, am still building my first mining RIG just wondering i got 1 of these currently and ordering some more from DIFFERENT BRAND (gpuminers.com) but my question regarding this: https://www.amazon.ae/gp/product/B08NTLGCVH/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 I think i will run out of PSU cables and ports to power all 5x risers and 3x 3060 Ti(s) + 2x 3070, So is it safe and fine to run this riser with the included sata port coz i got PLENTY of those... what should i do since i got only 8x PCI-E Headers available and i JUST bought this PSU today (silverstone 1200w) and i really like it ;D any advise appreciated... First you need 2 pcie power splitter and the 009s riser is good, they had 2 led indicator 12v and 3.3v, keep in mind power splitter only max for 200w, and put on psu biggest cable, above 200w you got burned the cable, either you splitter or pcie psu Title: Re: a new mining setup... Post by: aliitp2 on March 12, 2021, 07:33:30 PM Here are all the wattages of the 3 cables: https://www.gpuminingresources.com/p/psu-cables.html That's some awesome info, thanks a lot for sharing, I guess a riser needs 75 watts only ? So this mean molex cable is OK to.power up a riser ?... Thanks again.... Title: Re: a new mining setup... Post by: aliitp2 on March 12, 2021, 07:34:18 PM To be fair with you: Isn't pretty but the normal solution is: Hp server PSU 1200 watt ( refurbished)+ 12 PCI Breakout board + cable for the card + a stupid PSU for powering just the risers. We pay electricity more than you do .... but on top its a very clean installation So, I will stop the order of the very nice but not so much pcie - happy psu. The riser is good , btw Wow :o :o :o I have another question I already ordered the ones from gpurisers.com they run with molex or 6 pin Can I use the molex coz I have MANY free.molex available... Any advise appreciated... Thanks, I guess that's fine since I got plenty of these... Title: Re: a new mining setup... Post by: aliitp2 on March 12, 2021, 07:38:07 PM Hi Guys, am still building my first mining RIG just wondering i got 1 of these currently and ordering some more from DIFFERENT BRAND (gpuminers.com) but my question regarding this: https://www.amazon.ae/gp/product/B08NTLGCVH/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 I think i will run out of PSU cables and ports to power all 5x risers and 3x 3060 Ti(s) + 2x 3070, So is it safe and fine to run this riser with the included sata port coz i got PLENTY of those... what should i do since i got only 8x PCI-E Headers available and i JUST bought this PSU today (silverstone 1200w) and i really like it ;D any advise appreciated... First you need 2 pcie power splitter and the 009s riser is good, they had 2 led indicator 12v and 3.3v, keep in mind power splitter only max for 200w, and put on psu biggest cable, above 200w you got burned the cable, either you splitter or pcie psu 200w per splitter only ?!? That means I can only safely use a splitter to power two risers only not a riser and a gpu ???!.... I already ordered these: https://www.amazon.ae/dp/B08YCX59QV/ref=cm_sw_r_cp_apa_i_172EHA8572Z3RPS3PGA3 |