Title: My First ETH Mining Rig Post by: ImThour on March 28, 2021, 08:30:20 PM Hey,
This is my first ETH Mining Rig I ever made. Total 6 Cards (1 in Shipping): 1. GTX 1660 Ti x2 2. GTX 1660 Super x2 3. RX 570 8GB x2 Hashrate: 143 Mh/s (with 5 cards) @ 460 W on PhoenixMiner. https://i.imgur.com/Dk4YGRx.jpg https://i.imgur.com/6W10fB4.jpg Title: Re: My First ETH Mining Rig Post by: tg88 on March 28, 2021, 11:51:39 PM Congratulations is a great start.
You can improve the hashrate of the 1660 ti and super and reach 32 mhs with them without much effort, I will leave here the clocks that I use to reach 32 mhs with the 1660 super: https://i.postimg.cc/5tqx8Fsp/1660s.png Title: Re: My First ETH Mining Rig Post by: ImThour on March 29, 2021, 03:47:48 AM Congratulations is a great start. Thank you so much, I am trying to keep them as stable as possible for now. You can improve the hashrate of the 1660 ti and super and reach 32 mhs with them without much effort, I will leave here the clocks that I use to reach 32 mhs with the 1660 super: https://i.postimg.cc/5tqx8Fsp/1660s.png Whenever I set memory clock to more than 700, it restarts the rig for me. Nice job. Congrats Thanks Tarzan2.Title: Re: My First ETH Mining Rig Post by: 7deadlyBTCIN on March 29, 2021, 06:29:25 AM Your hashrates are way off, you should be getting 156 MH from 4x gtx1660S & Ti (126MH) and a RX580 (30MH ), my 1660supers have hynix memory so you will have to drag down core clock and memory clock to the lowest using msi afterburner, trust me it works
Title: Re: My First ETH Mining Rig Post by: batsonxl on March 29, 2021, 08:44:25 AM Your hashrates are way off, you should be getting 156 MH from 4x gtx1660S & Ti (126MH) and a RX580 (30MH ), my 1660supers have hynix memory so you will have to drag down core clock and memory clock to the lowest using msi afterburner, trust me it works yes for nvidia he is right do it and get more and less power consumption. and for your rx also add commands to undervolt reduce power and also add memory to increase hashrate. Title: Re: My First ETH Mining Rig Post by: ImThour on March 29, 2021, 10:07:35 AM Your hashrates are way off, you should be getting 156 MH from 4x gtx1660S & Ti (126MH) and a RX580 (30MH ), my 1660supers have hynix memory so you will have to drag down core clock and memory clock to the lowest using msi afterburner, trust me it works Hey,I am new and I did some of the settings doing some research. Is it possible if you can help me fine tune my GPUs? Telegram: @imthour yes for nvidia he is right do it and get more and less power consumption. and for your rx also add commands to undervolt reduce power and also add memory to increase hashrate. Not sure where to add the command, I am using PhoenixMiner.My RX Settings: https://i.imgur.com/3TCBc3E.png My NVIDIA Settings: https://i.imgur.com/Ddjuq83.png Title: Re: My First ETH Mining Rig Post by: batsonxl on March 29, 2021, 02:01:00 PM You are using phoenixminer just add in bat file this. -cclock 1150 -cvddc 900 -mclock 2000 -mvddc 950 -rxboost 1
It is most stable clocks you can play with them later until it gets unstable. in your case you have 6 gpus so your command will look like this : -cclock 1150,0,0,1150,0,0 here is gpu 1 and 4 is rx. look what you have press s letter you will see which gpu 1,2,3,4,5,6 make screenshot and show us so we can give you exact command Title: Re: My First ETH Mining Rig Post by: kaya11 on March 29, 2021, 05:08:39 PM You are using phoenixminer just add in bat file this. -cclock 1150 -cvddc 900 -mclock 2000 -mvddc 950 -rxboost 1 It is most stable clocks you can play with them later until it gets unstable. in your case you have 6 gpus so your command will look like this : -cclock 1150,0,0,1150,0,0 here is gpu 1 and 4 is rx. look what you have press s letter you will see which gpu 1,2,3,4,5,6 make screenshot and show us so we can give you exact command I am using nanominer from nanopool, I have here a 3 running rx5600 xt, AMD cards. I don't know how to set this up, current set up is stock and I am waiting for someone to post similar cards but never manage to see one here. So I have leave it for a while, can you somehow send me some tips if I can still improve the hahrrate of each card? I am getting 39 mh/s on each card on eth mining. Title: Re: My First ETH Mining Rig Post by: TheMimic1 on March 29, 2021, 06:11:20 PM You are using phoenixminer just add in bat file this. -cclock 1150 -cvddc 900 -mclock 2000 -mvddc 950 -rxboost 1 It is most stable clocks you can play with them later until it gets unstable. in your case you have 6 gpus so your command will look like this : -cclock 1150,0,0,1150,0,0 here is gpu 1 and 4 is rx. look what you have press s letter you will see which gpu 1,2,3,4,5,6 make screenshot and show us so we can give you exact command I am using nanominer from nanopool, I have here a 3 running rx5600 xt, AMD cards. I don't know how to set this up, current set up is stock and I am waiting for someone to post similar cards but never manage to see one here. So I have leave it for a while, can you somehow send me some tips if I can still improve the hahrrate of each card? I am getting 39 mh/s on each card on eth mining. Title: Re: My First ETH Mining Rig Post by: philipma1957 on March 29, 2021, 09:50:03 PM You are using phoenixminer just add in bat file this. -cclock 1150 -cvddc 900 -mclock 2000 -mvddc 950 -rxboost 1 It is most stable clocks you can play with them later until it gets unstable. in your case you have 6 gpus so your command will look like this : -cclock 1150,0,0,1150,0,0 here is gpu 1 and 4 is rx. look what you have press s letter you will see which gpu 1,2,3,4,5,6 make screenshot and show us so we can give you exact command I am using nanominer from nanopool, I have here a 3 running rx5600 xt, AMD cards. I don't know how to set this up, current set up is stock and I am waiting for someone to post similar cards but never manage to see one here. So I have leave it for a while, can you somehow send me some tips if I can still improve the hahrrate of each card? I am getting 39 mh/s on each card on eth mining. The 5600xt with proper settings can do 38 and 75 watts Smos asus strix give me a minute to show a screen shot it is one of the most efficient amd cards there is see below https://i.imgur.com/xAVdeoI.png Title: Re: My First ETH Mining Rig Post by: mak013 on March 30, 2021, 04:02:04 AM The highest hashrate I can pull out of a RX5600XT is 37MH, if you are getting 39MH well that's even cool don't you think? The gpu just sucks in mining performance, not close to RX5700XT performance, I've seen few getting 40MH on RX5600XT but with power draw of 130watts, that's not worth it My 5600XT gives me 43.2-43.7MH any one, power consumption - 100-110Wt, tested using wattmeter. Don`t touch it for months. Flashed to MSI. It looks not so far from RX5700, isnt it?Title: Re: My First ETH Mining Rig Post by: FP91G on March 30, 2021, 11:47:29 AM RX5600XT Sapphire nitro(Samsung), hash rate 40MH and power consumption 94 watts from the wall.
This is the smallest consumption that I have been able to get. I also have Gigabytes and Asus, they give more hashrate and more power consumption. Gigabytes of RX5600XT give 42 MH out of the box, I haven't even upgraded their BIOS. Title: Re: My First ETH Mining Rig Post by: fmz89 on March 30, 2021, 02:04:26 PM Hey, congrats for great start, and hopefully this is the begining of your mining journey, red & green team, maybe is all you got that mixed card for this time being gpu rarely seen on msrp price...This is my first ETH Mining Rig I ever made. Total 6 Cards (1 in Shipping): 1. GTX 1660 Ti x2 2. GTX 1660 Super x2 3. RX 570 8GB x2 Hashrate: 143 Mh/s (with 5 cards) @ 460 W on PhoenixMiner. https://i.imgur.com/Dk4YGRx.jpg https://i.imgur.com/6W10fB4.jpg Title: Re: My First ETH Mining Rig Post by: batsonxl on March 30, 2021, 02:06:29 PM You are using phoenixminer just add in bat file this. -cclock 1150 -cvddc 900 -mclock 2000 -mvddc 950 -rxboost 1 It is most stable clocks you can play with them later until it gets unstable. in your case you have 6 gpus so your command will look like this : -cclock 1150,0,0,1150,0,0 here is gpu 1 and 4 is rx. look what you have press s letter you will see which gpu 1,2,3,4,5,6 make screenshot and show us so we can give you exact command I am using nanominer from nanopool, I have here a 3 running rx5600 xt, AMD cards. I don't know how to set this up, current set up is stock and I am waiting for someone to post similar cards but never manage to see one here. So I have leave it for a while, can you somehow send me some tips if I can still improve the hahrrate of each card? I am getting 39 mh/s on each card on eth mining. https://www.youtube.com/watch?v=7n4X3YGtNCk&t=543s he got from 40mhs to 44mhs. |