Title: Avalon 1041 help Post by: smracer on April 07, 2021, 02:28:52 PM I have a bunch of Avalon 1041's (They are 1046's but they say 1041 on the side).
Every once in a while, one of them will just stop mining. They always do the same thing. I am attaching a screenshot of the log and status screen. Has anyone seen this before or know how to fix this issue? Maybe a PSU issue? If it was a bad hashboard you would think it would mine at a lower speed. After reboot they just come up the same way. I have been just putting them in a pile and grabbing a new one to replace them when this happens. I probably have 20 with the same issue. Any help would be great. https://i.ibb.co/Zxm1wR1/avalonbad.png https://i.ibb.co/dGpfrZp/avalonbadlog.png Imgur link https://imgur.com/a/DdEQWqI EDIT: SOLUTION. If anyone has the same problem. It is the small PSU fans. One of them freezes up and needs to be replaced. Title: Re: Avalon 1041 help Post by: deusopus on June 15, 2023, 09:57:53 PM can you just add another one in series and plug it into the control box (raspberry pi module) and have it "just work"?
Title: Re: Avalon 1041 help Post by: BitMaxz on June 15, 2023, 10:57:58 PM can you just add another one in series and plug it into the control box (raspberry pi module) and have it "just work"? I think yes if it does not have Ethernet socket then it requires control box/Raspberry pi and auc3.However, base on the old guide from this link below it is already have a built-in controller so you don't need them in order to communicate to the unit unlike old models like 721, 741, 761, 821 and 841 that requires both auc3 and control box. - https://bitcointalk.org/index.php?topic=5164326 |