Bitcoin Forum

Alternate cryptocurrencies => Mining (Altcoins) => Topic started by: Biggermens on May 07, 2021, 01:18:16 PM



Title: What card causes stale shares ???
Post by: Biggermens on May 07, 2021, 01:18:16 PM
Hi Everyone

I am using phoenixminer also MBMiner and i was wondering if there was a way to see what GPU is causing the stale shares ????
I understand that network latency has a part in it, I average about 15ms i think that is pretty good ??



Thanks
Biggs


Title: Re: What card causes stale shares ???
Post by: philipma1957 on May 07, 2021, 01:48:12 PM
Hi Everyone

I am using phoenixminer also MBMiner and i was wondering if there was a way to see what GPU is causing the stale shares ????
I understand that network latency has a part in it, I average about 15ms i think that is pretty good ??



Thanks
Biggs

15ms is world class good.

So the question is not your connection speed.

What are your mining gpus and what is the percent of stale over 5% is bad.

so do you have a lot of stales like 20%


my guess would would your clocks are wrong


Title: Re: What card causes stale shares ???
Post by: Commie on May 07, 2021, 02:19:23 PM
Hi Everyone

I am using phoenixminer also MBMiner and i was wondering if there was a way to see what GPU is causing the stale shares ????
I understand that network latency has a part in it, I average about 15ms i think that is pretty good ??

Thanks
Biggs

Awesome miner allows you to see accepted/rejected shares for each GPU.

https://www.awesomeminer.com/img/miner-gpu01.png

15ms is great, try to play with your OC settings and see if % of rejected shares goes lower. But usually 1-3% is okay.


Title: Re: What card causes stale shares ???
Post by: miner29 on May 07, 2021, 03:37:03 PM
Miner output on PM shows it per card as well..

Look at the actual output from the miner and will see

Eth speed: 187.894 MH/s, shares: 11657/2/17, time: 76:11
GPUs: 1: 31.332 MH/s (1921/17) 2: 31.334 MH/s (1862) 3: 31.332 MH/s (1982) 4: 31.332 MH/s (1954) 5: 31.333 MH/s (1990) 6: 31.232 MH/s (1950)

Not on GPU1 shows 31.332MH/s (1921/17)  this is 1921 accepted / 17 rejected.


miners like Teamredminer show per gpu accepted/rejected/hw error....

Just gotta look at the actual output screen of the miner software.


Title: Re: What card causes stale shares ???
Post by: JayDDee on May 07, 2021, 04:07:43 PM
GPUs don't cause stale shares.


Title: Re: What card causes stale shares ???
Post by: miner29 on May 07, 2021, 09:38:41 PM
GPUs don't cause stale shares.

You are correct was thinking he meant rejected shares....


Title: Re: What card causes stale shares ???
Post by: MCcryptonia on May 08, 2021, 02:02:41 PM
Too much OC can cause stale shares and rejected shares and that same goes to bad internet connection too, fix these two areas and it's a bye bye to the problems


Title: Re: What card causes stale shares ???
Post by: jgonzi on May 08, 2021, 03:01:52 PM
Hi Everyone

I am using phoenixminer also MBMiner and i was wondering if there was a way to see what GPU is causing the stale shares ????
I understand that network latency has a part in it, I average about 15ms i think that is pretty good ??



Thanks
Biggs

Try to improve your connection to a better server and also try others miners


Title: Re: What card causes stale shares ???
Post by: batsonxl on May 08, 2021, 05:32:30 PM
Too much OC can cause stale shares and rejected shares and that same goes to bad internet connection too, fix these two areas and it's a bye bye to the problems
No stale share is different to rejected share.
    Stale share is correct share but you are too late to submit it. It happens in 2 circumstances. 1st :bad network. 2nd: Your hashrate is too low for that pool, other miners are much faster than you.if your hashrate is too low you must find pool with pps+ which pays you for every share.
   Rejected share is incorrect share which happens with too much OC.