Title: antminer S17, Failed to detect ASIC chips. Post by: Tatsuki on July 12, 2021, 08:28:00 AM [2021/07/12 08:09:02] INFO: Setting freq to 50 Mhz gradually
[2021/07/12 08:09:13] INFO: Detected 256 Mb of RAM [2021/07/12 08:09:13] INFO: Switching to manual fan control (30 %) [2021/07/12 08:09:13] INFO: Checking fans [2021/07/12 08:09:14] INFO: fan[0] - OK [2021/07/12 08:09:14] INFO: fan[1] - OK [2021/07/12 08:09:14] INFO: fan[2] - OK [2021/07/12 08:09:14] INFO: fan[3] - OK [2021/07/12 08:09:20] INFO: Power ON [2021/07/12 08:09:23] INFO: Starting FPGA queue [2021/07/12 08:09:23] INFO: Initializing hash boards [2021/07/12 08:09:23] INFO: chain[2] - Initializing [2021/07/12 08:09:23] INFO: chain[1] - Initializing [2021/07/12 08:09:23] INFO: chain[0] - Initializing [2021/07/12 08:09:38] INFO: chain[2] - 48 chips detected [2021/07/12 08:09:39] INFO: chain[1] - 48 chips detected [2021/07/12 08:09:42] WARN: chain[0] - 40 of 48 chips detected [2021/07/12 08:09:53] WARN: chain[0] - 40 of 48 chips detected [2021/07/12 08:10:05] WARN: chain[0] - 40 of 48 chips detected [2021/07/12 08:10:05] ERROR: driver-btm-chain.c:488 chain[0] - Failed to detect ASIC chips [2021/07/12 08:10:05] INFO: chain[0] - Shutting down the chain [2021/07/12 08:10:05] ERROR: driver-btm-base.c:356 chain[0] - Initialization failed [2021/07/12 08:10:09] INFO: Start-up temperature is 27 C (min -15 C) [2021/07/12 08:10:09] INFO: Switching to manual fan control (100 %) [2021/07/12 08:10:09] INFO: Changing voltage from 21000 to 17400 mV gradually [2021/07/12 08:10:51] INFO: Raising freq from 50 to 500 Mhz gradually [2021/07/12 08:11:02] INFO: Switching to manual fan control (100 %) [2021/07/12 08:11:02] INFO: Start mining! [2021/07/12 08:12:02] INFO: Changing voltage from 17400 to 17200 mV gradually [2021/07/12 08:12:27] INFO: Changing voltage from 17200 to 17000 mV gradually . hi, so 40 chips are being detected from 48, sometimes its only 37. https://ibb.co/V9cB8QS (image link) so only 2 hashboards are working. is there any way i can make first one work only on 40 chips? thanks in advance. Title: Re: antminer S17, Failed to detect ASIC chips. Post by: HagssFIN on July 12, 2021, 10:16:40 AM No, you can't configure with software the amount of ASIC chips that are in use.
Title: Re: antminer S17, Failed to detect ASIC chips. Post by: philipma1957 on July 12, 2021, 10:34:54 AM there are some people that may work on it for you. you likely need to reflow some chips.
Title: Re: antminer S17, Failed to detect ASIC chips. Post by: mikeywith on July 12, 2021, 04:41:49 PM The chips are in series, all of them need to be working, you seem to be having an issue with chip number 41, given the fact that this is a 17 model, chances are the chip lost contact with the board, you will need some tools and skills to fix that, or send it somewhere for repair.
|