Title: help with error message s17pro Post by: dadtothemax on August 05, 2021, 12:30:51 AM I recently purchased a s17 pro and I'm having trouble getting the thing to work. the rig will only stay running for 5 or 15 minutes then power down. I posted below the error that keeps coming up. pleas help ya favorite boomer dad
[2021/08/05 00:19:57] INFO: Power ON [2021/08/05 00:19:59] INFO: Starting FPGA queue [2021/08/05 00:19:59] INFO: Initializing hash boards [2021/08/05 00:19:59] INFO: chain[2] - Initializing [2021/08/05 00:19:59] INFO: chain[1] - Initializing [2021/08/05 00:19:59] INFO: chain[0] - Initializing [2021/08/05 00:20:14] INFO: chain[2] - 48 chips detected [2021/08/05 00:20:16] INFO: chain[0] - 48 chips detected [2021/08/05 00:20:17] INFO: chain[1] - 48 chips detected [2021/08/05 00:20:25] INFO: Start-up temperature is 26 C (min -15 C) [2021/08/05 00:20:25] INFO: Switching to manual fan control (100 %) [2021/08/05 00:20:25] INFO: Changing voltage from 21000 to 16400 mV gradually [2021/08/05 00:21:26] ERROR: driver-btm-chain.c:687 chain[1] - Voltage is different, cur=16905 mV tgt=16400 mV [2021/08/05 00:21:41] ERROR: driver-btm-chain.c:687 chain[1] - Voltage is different, cur=16917 mV tgt=16400 mV [2021/08/05 00:21:55] ERROR: driver-btm-chain.c:687 chain[1] - Voltage is different, cur=16924 mV tgt=16400 mV [2021/08/05 00:21:56] ERROR: driver-btm-base.c:289 Failed to verify PSU output voltage [2021/08/05 00:21:56] ERROR: driver-btm-base.c:853 Failed to verify final voltage [2021/08/05 00:21:56] ERROR: driver-btm-base.c:1788 Failed to set open-core voltage [2021/08/05 00:21:56] ERROR: driver-btm-base.c:2196 Failed to set operating frequencies [2021/08/05 00:21:56] INFO: Shutting down the miner Title: Re: help with error message s17pro Post by: gt_addict on August 05, 2021, 07:55:38 AM I would say you need a new psu.
Title: Re: help with error message s17pro Post by: philipma1957 on August 09, 2021, 02:56:20 PM new psu is almost certainly need.
do you have proper power 210 to 240 volts? if you do. try opening gear and using only 1 of the three hash boards. if that works try using two hash boards. more likely the psu is dead. if the power is 210 to 240 volts. once in a while you can run a board or two boards if the psu is weak. finding a new psu will be very very very hard. good luck on that. |