Title: is there a Converter for this sata input so i can get a 4-6 pin Post by: Mahmoud70 on August 13, 2021, 06:42:12 PM https://preview.redd.it/pbbql2r4zzg71.png?width=724&format=png&auto=webp&s=6c6b4495f57ba585fbb3702ac5a5f04e985fdad4
i want to use a risers with 6pin cable but with molex or sata it's less power than the pcie needs(75)w and i don't want to use the main pcie entrances on the power supply becuse i want tp use them for the cards so i was thinking is there a cable i can use to convert this output to 8pin ? even if i use 2 to get one 8pin ? can i use that? Title: Re: is there a Converter for this sata input so i can get a 4-6 pin Post by: Philipma1957cellphone on August 13, 2021, 06:50:52 PM Yes.
Also this is for gpu mining not btc mining. Question should be in altcoins I will ask mods to move it. I will look for a link for what you want. https://www.walmart.com/ip/Cable-Matters-2-Pack-8-Pin-to-SATA-Power-Cable-SATA-to-8-Pin-PCIe-5-Inches/965486107? Now to feed sata into this use two Sata cables from separate jacks. So you can safely do two risers with four sata jacks. Title: Re: is there a Converter for this sata input so i can get a 4-6 pin Post by: Bitfort on August 13, 2021, 09:55:22 PM or something like this: https://www.ebay.com/itm/140662092231
(2x molex to pci-express 8-pin) Title: Re: is there a Converter for this sata input so i can get a 4-6 pin Post by: JayDDee on August 13, 2021, 10:04:01 PM I'm not aware of such a cable but it seems like a good idea. The thing is not all PSUs use the
same pinout so they would have to be custom made. Title: Re: is there a Converter for this sata input so i can get a 4-6 pin Post by: Philipma1957cellphone on August 13, 2021, 10:24:26 PM or something like this: https://www.ebay.com/itm/140662092231 (2x molex to pci-express 8-pin) I am not sure it is wired correctly but it can work with proper wiring. At op have the riser handle 50-80 watts usually only happens on high watt gpus. A 1080ti a 3080 a 3090 Title: Re: is there a Converter for this sata input so i can get a 4-6 pin Post by: batsonxl on August 14, 2021, 07:51:58 AM Yes you can use but dont overload these slots to much it melts easy. max 2 risers on 1 slot.
Title: Re: is there a Converter for this sata input so i can get a 4-6 pin Post by: deadsix on August 14, 2021, 08:26:31 AM i want to use a risers with 6pin cable but with molex or sata it's less power than the pcie needs(75)w and i don't want to use the main pcie entrances on the power supply becuse i want tp use them for the cards so i was thinking is there a cable i can use to convert this output to 8pin ? even if i use 2 to get one 8pin ? can i use that? No. And its not recommended - they arent meant to handle that kind of amps and will likely burn/melt. If using a low power GPU use a molex riser. Or if you still want to use a pcie powered riser, get a splitter cable and use that on your psu's pcie cable - use one end of the splitter to power the riser and the other to power the GPU. |