|
Title: T17e - problem with "red" frequencies Post by: Perverza on August 14, 2021, 06:11:40 PM Hello,
i have one hash board which have a bad frequencies. Log is without failure. Used firmware HiveOS . Here is explanation: When is a hash board in Chain 0, problem is with line 4. When i insert board to Chain 1, problem is with line number 3. I dont understand. :/ is it mystery for me. What sets up the frequencies for lines/Asics ? What do these lines have in common? I changed 2x 0,8Volts and 1,8V regulators for line 4, next i changed first and last asic chip in the line, but same issue, after 5 minutes are Asics in line red. Check picture https://imgur.com/a/irei6WZ Thank you for help. M. |