Title: T17 not hashing
Post by: Nthny77 on October 25, 2021, 12:10:54 AM
Hello, This is my first machine bought refurbished. I am having trouble getting it hashing and I am not sure what the problem is. I am using SlushPool and the worker appears on my account but is always offline. I contacted support and miner configuration looks good. The pool is alive but everything is discarded. Also my ethernet connects direct to my modem, the port is orange and should be green - I thought. I can post any info requested. Here is my Kernal Log, I am still learning to read them. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203752K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25624K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12584K (cceb7000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 3266144891 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 4B3EE8FB-0A19-441D-A20E-85C2F357BFFF, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 7/4, WL threshold: 4096, image sequence number: 100324054 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 058C0E40-6EAA-4676-9C52-F694F6D34F3B, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab013 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized macb e000b000.ethernet eth0: link down macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) macb e000b000.ethernet eth0: link down macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) Oct 24 23:20:18 (none) local0.notice bmminer: set_start_time_point total_tv_start_sys=856 total_tv_end_sys=857 Oct 24 23:20:19 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_api_detect return: 0 Oct 24 23:20:20 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_update_job return: 0 Oct 24 23:20:21 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_shutdown return: 0 Oct 24 23:20:21 (none) local0.err cgminer: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17 Oct 24 23:20:21 (none) local0.notice cgminer[2763]: about to send detect Oct 24 23:20:21 (none) local0.notice cgminer[2763]: set_start_time_point total_tv_start_sys=859 total_tv_end_sys=860 Oct 24 23:20:21 (none) local0.notice cgminer[2763]: Probing for an alive pool Oct 24 23:20:21 (none) local0.notice cgminer[2763]: Pool 0 difficulty changed to 8192 Oct 24 23:20:21 (none) local0.notice cgminer[2763]: Pool 2 difficulty changed to 8192 Oct 24 23:20:21 (none) local0.notice cgminer[2763]: LOW POWER MODE! Oct 24 23:20:21 (none) local0.notice cgminer[2763]: in stratum_sthread Oct 24 23:20:21 (none) local0.notice cgminer[2763]: POOL 0 support ab mode! Oct 24 23:20:21 (none) local0.notice cgminer[2763]: Network diff set to 20.1T Oct 24 23:20:21 (none) local0.notice cgminer[2763]: Pool 1 difficulty changed to 8192 Oct 24 23:20:21 (none) local0.notice cgminer[2763]: LOW POWER MODE! Oct 24 23:20:21 (none) local0.notice cgminer[2763]: in stratum_sthread Oct 24 23:20:21 (none) local0.notice cgminer[2763]: LOW POWER MODE! Oct 24 23:20:21 (none) local0.notice cgminer[2763]: in stratum_sthread Oct 24 23:20:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:20:22 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:20:22 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:20:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:20:22 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:20:27 (none) local0.warn cgminer[2763]: API running in IP access mode on port 4028 (14) Oct 24 23:20:51 (none) local0.notice cgminer[2763]: Pool 0 difficulty changed to 1638 Oct 24 23:20:51 (none) local0.notice cgminer[2763]: Stratum from pool 0 requested work restart Oct 24 23:20:51 (none) local0.notice cgminer[2763]: update job Oct 24 23:20:51 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:20:51 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:20:51 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:20:51 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:21:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:21:22 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:21:22 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:21:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:21:22 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:21:51 (none) local0.notice cgminer[2763]: Pool 0 difficulty changed to 512 Oct 24 23:21:51 (none) local0.notice cgminer[2763]: Stratum from pool 0 requested work restart Oct 24 23:21:51 (none) local0.notice cgminer[2763]: update job Oct 24 23:21:51 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:21:51 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:21:51 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:21:51 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:22:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:22:22 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:22:22 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:22:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:22:22 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:22:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:22:52 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:22:52 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:22:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:22:52 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:23:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:23:22 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:23:22 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:23:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:23:22 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:23:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:23:52 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:23:52 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:23:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:23:52 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:24:09 (none) local0.notice cgminer[2763]: Stratum from pool 0 detected new block at height 706524 Oct 24 23:24:09 (none) local0.notice cgminer[2763]: update job Oct 24 23:24:09 (none) local0.notice cgminer[2763]: job buf total len:2061, offset:2061 Oct 24 23:24:09 (none) local0.notice cgminer[2763]: about to send job, size is 2061 Oct 24 23:24:09 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2061 Oct 24 23:24:09 (none) local0.notice bmminer: parse job buf len:2061 Oct 24 23:24:10 (none) local0.notice cgminer[2763]: update job Oct 24 23:24:10 (none) local0.notice cgminer[2763]: job buf total len:2446, offset:2446 Oct 24 23:24:10 (none) local0.notice cgminer[2763]: about to send job, size is 2446 Oct 24 23:24:10 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2446 Oct 24 23:24:10 (none) local0.notice bmminer: parse job buf len:2446 Oct 24 23:24:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:24:22 (none) local0.notice cgminer[2763]: job buf total len:2446, offset:2446 Oct 24 23:24:22 (none) local0.notice cgminer[2763]: about to send job, size is 2446 Oct 24 23:24:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2446 Oct 24 23:24:22 (none) local0.notice bmminer: parse job buf len:2446 Oct 24 23:24:38 (none) local0.notice cgminer[2763]: Stratum from pool 0 detected new block at height 706525 Oct 24 23:24:38 (none) local0.notice cgminer[2763]: update job Oct 24 23:24:38 (none) local0.notice cgminer[2763]: job buf total len:2061, offset:2061 Oct 24 23:24:38 (none) local0.notice cgminer[2763]: about to send job, size is 2061 Oct 24 23:24:38 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2061 Oct 24 23:24:38 (none) local0.notice bmminer: parse job buf len:2061 Oct 24 23:24:40 (none) local0.notice cgminer[2763]: update job Oct 24 23:24:40 (none) local0.notice cgminer[2763]: job buf total len:2382, offset:2382 Oct 24 23:24:40 (none) local0.notice cgminer[2763]: about to send job, size is 2382 Oct 24 23:24:40 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2382 Oct 24 23:24:40 (none) local0.notice bmminer: parse job buf len:2382 Oct 24 23:24:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:24:52 (none) local0.notice cgminer[2763]: job buf total len:2382, offset:2382 Oct 24 23:24:52 (none) local0.notice cgminer[2763]: about to send job, size is 2382 Oct 24 23:24:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2382 Oct 24 23:24:52 (none) local0.notice bmminer: parse job buf len:2382 Oct 24 23:25:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:25:22 (none) local0.notice cgminer[2763]: job buf total len:2414, offset:2414 Oct 24 23:25:22 (none) local0.notice cgminer[2763]: about to send job, size is 2414 Oct 24 23:25:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2414 Oct 24 23:25:22 (none) local0.notice bmminer: parse job buf len:2414 Oct 24 23:25:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:25:52 (none) local0.notice cgminer[2763]: job buf total len:2446, offset:2446 Oct 24 23:25:52 (none) local0.notice cgminer[2763]: about to send job, size is 2446 Oct 24 23:25:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2446 Oct 24 23:25:52 (none) local0.notice bmminer: parse job buf len:2446 Oct 24 23:26:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:26:22 (none) local0.notice cgminer[2763]: job buf total len:2446, offset:2446 Oct 24 23:26:22 (none) local0.notice cgminer[2763]: about to send job, size is 2446 Oct 24 23:26:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2446 Oct 24 23:26:22 (none) local0.notice bmminer: parse job buf len:2446 Oct 24 23:26:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:26:52 (none) local0.notice cgminer[2763]: job buf total len:2446, offset:2446 Oct 24 23:26:52 (none) local0.notice cgminer[2763]: about to send job, size is 2446 Oct 24 23:26:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2446 Oct 24 23:26:52 (none) local0.notice bmminer: parse job buf len:2446 Oct 24 23:27:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:27:22 (none) local0.notice cgminer[2763]: job buf total len:2446, offset:2446 Oct 24 23:27:22 (none) local0.notice cgminer[2763]: about to send job, size is 2446 Oct 24 23:27:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2446 Oct 24 23:27:22 (none) local0.notice bmminer: parse job buf len:2446 Oct 24 23:27:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:27:52 (none) local0.notice cgminer[2763]: job buf total len:2478, offset:2478 Oct 24 23:27:52 (none) local0.notice cgminer[2763]: about to send job, size is 2478 Oct 24 23:27:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2478 Oct 24 23:27:52 (none) local0.notice bmminer: parse job buf len:2478 Oct 24 23:28:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:28:22 (none) local0.notice cgminer[2763]: job buf total len:2478, offset:2478 Oct 24 23:28:22 (none) local0.notice cgminer[2763]: about to send job, size is 2478 Oct 24 23:28:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2478 Oct 24 23:28:22 (none) local0.notice bmminer: parse job buf len:2478 Oct 24 23:28:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:28:52 (none) local0.notice cgminer[2763]: job buf total len:2478, offset:2478 Oct 24 23:28:52 (none) local0.notice cgminer[2763]: about to send job, size is 2478 Oct 24 23:28:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2478 Oct 24 23:28:52 (none) local0.notice bmminer: parse job buf len:2478 Oct 24 23:29:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:29:22 (none) local0.notice cgminer[2763]: job buf total len:2478, offset:2478 Oct 24 23:29:22 (none) local0.notice cgminer[2763]: about to send job, size is 2478 Oct 24 23:29:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2478 Oct 24 23:29:22 (none) local0.notice bmminer: parse job buf len:2478 Oct 24 23:29:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:29:52 (none) local0.notice cgminer[2763]: job buf total len:2478, offset:2478 Oct 24 23:29:52 (none) local0.notice cgminer[2763]: about to send job, size is 2478 Oct 24 23:29:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2478 Oct 24 23:29:52 (none) local0.notice bmminer: parse job buf len:2478 Oct 24 23:30:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:30:22 (none) local0.notice cgminer[2763]: job buf total len:2478, offset:2478 Oct 24 23:30:22 (none) local0.notice cgminer[2763]: about to send job, size is 2478 Oct 24 23:30:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2478 Oct 24 23:30:22 (none) local0.notice bmminer: parse job buf len:2478 Oct 24 23:30:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:30:52 (none) local0.notice cgminer[2763]: job buf total len:2478, offset:2478 Oct 24 23:30:52 (none) local0.notice cgminer[2763]: about to send job, size is 2478 Oct 24 23:30:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2478 Oct 24 23:30:52 (none) local0.notice bmminer: parse job buf len:2478 Oct 24 23:31:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:31:22 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:31:22 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:31:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:31:22 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:31:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:31:52 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:31:52 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:31:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:31:52 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:32:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:32:22 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:32:22 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:32:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:32:22 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:32:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:32:52 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:32:52 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:32:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:32:52 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:33:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:33:22 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:33:22 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:33:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:33:22 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:33:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:33:52 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:33:52 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:33:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:33:52 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:34:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:34:22 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:34:22 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:34:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:34:22 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:34:48 (none) user.info kernel: macb e000b000.ethernet eth0: link down Oct 24 23:35:37 (none) local0.notice cgminer[2763]: Stratum connection to pool 0 interrupted Oct 24 23:35:37 (none) local0.notice cgminer[2763]: update job Oct 24 23:35:47 (none) local0.warn cgminer[2763]: Waiting for work to be available from pools. Oct 24 23:36:17 (none) local0.warn cgminer[2763]: Pool 0 stratum+tcp://ca.stratum.slushpool.com:3333 not responding! Oct 24 23:37:51 (none) user.warn kernel: macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz Oct 24 23:37:51 (none) user.info kernel: macb e000b000.ethernet eth0: link up (100/Full) Oct 24 23:37:52 (none) local0.notice cgminer[2763]: Pool 0 successfully negotiated resume with the same session ID Oct 24 23:37:52 (none) local0.notice cgminer[2763]: Pool 0 difficulty changed to 8192 Oct 24 23:37:52 (none) local0.notice cgminer[2763]: LOW POWER MODE! Oct 24 23:37:52 (none) local0.notice cgminer[2763]: Stratum from pool 0 requested work restart Oct 24 23:37:52 (none) local0.warn cgminer[2763]: Work available from pools, resuming. Oct 24 23:37:52 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:37:52 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:37:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:37:52 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:37:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:37:52 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:37:52 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:37:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:37:52 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:37:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:37:52 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:37:52 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:37:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:37:52 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:37:52 (none) local0.notice cgminer[2763]: POOL 0 support ab mode! Oct 24 23:37:57 (none) user.info kernel: macb e000b000.ethernet eth0: link down Oct 24 23:37:58 (none) user.warn kernel: macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz Oct 24 23:37:58 (none) user.info kernel: macb e000b000.ethernet eth0: link up (100/Full) Oct 24 23:38:02 (none) local0.notice cgminer[2763]: Pool 1 successfully negotiated resume with the same session ID Oct 24 23:38:02 (none) local0.notice cgminer[2763]: Pool 2 successfully negotiated resume with the same session ID Oct 24 23:38:02 (none) local0.notice cgminer[2763]: Pool 1 difficulty changed to 8192 Oct 24 23:38:02 (none) local0.notice cgminer[2763]: Pool 2 difficulty changed to 8192 Oct 24 23:38:02 (none) local0.notice cgminer[2763]: LOW POWER MODE! Oct 24 23:38:02 (none) local0.notice cgminer[2763]: LOW POWER MODE! Oct 24 23:38:02 (none) local0.notice cgminer[2763]: POOL 2 support ab mode! Oct 24 23:38:02 (none) local0.notice cgminer[2763]: POOL 1 support ab mode! Oct 24 23:38:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:38:22 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:38:22 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:38:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:38:22 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:38:52 (none) local0.notice cgminer[2763]: Pool 0 difficulty changed to 1638 Oct 24 23:38:52 (none) local0.notice cgminer[2763]: Stratum from pool 0 requested work restart Oct 24 23:38:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:38:52 (none) local0.notice cgminer[2763]: job buf total len:2510, offset:2510 Oct 24 23:38:52 (none) local0.notice cgminer[2763]: about to send job, size is 2510 Oct 24 23:38:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2510 Oct 24 23:38:52 (none) local0.notice bmminer: parse job buf len:2510 Oct 24 23:39:22 (none) local0.notice cgminer[2763]: Pool 0 difficulty changed to 512 Oct 24 23:39:22 (none) local0.notice cgminer[2763]: Stratum from pool 0 requested work restart Oct 24 23:39:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:39:22 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:39:22 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:39:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:39:22 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:39:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:39:52 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:39:52 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:39:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:39:52 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:40:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:40:22 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:40:22 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:40:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:40:22 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:40:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:40:52 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:40:52 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:40:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:40:52 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:41:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:41:22 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:41:22 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:41:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:41:22 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:41:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:41:52 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:41:52 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:41:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:41:52 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:42:22 (none) local0.notice cgminer[2763]: update job Oct 24 23:42:22 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:42:22 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:42:22 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:42:22 (none) local0.notice bmminer: parse job buf len:2542 Oct 24 23:42:52 (none) local0.notice cgminer[2763]: update job Oct 24 23:42:52 (none) local0.notice cgminer[2763]: job buf total len:2542, offset:2542 Oct 24 23:42:52 (none) local0.notice cgminer[2763]: about to send job, size is 2542 Oct 24 23:42:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2542 Oct 24 23:42:52 (none) local0.notice bmminer: parse job buf len:2542 2021-10-24 23:14:53 driver-btm-api.c:663:init_freq_mode: This is scan-user version 2021-10-24 23:14:53 driver-btm-api.c:2028:bitmain_soc_init: opt_multi_version = 1 2021-10-24 23:14:53 driver-btm-api.c:2029:bitmain_soc_init: opt_bitmain_ab = 1 2021-10-24 23:14:53 driver-btm-api.c:2030:bitmain_soc_init: opt_bitmain_work_mode = 0 2021-10-24 23:14:53 driver-btm-api.c:2031:bitmain_soc_init: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17 2021-10-24 23:14:53 driver-btm-api.c:2032:bitmain_soc_init: commit version: 1c5be6f 2020-04-20 16:18:14, build by: lol 2020-04-23 16:35:04 2021-10-24 23:14:53 driver-btm-api.c:1844:show_sn: no SN got, please write SN to /nvdata/sn 2021-10-24 23:14:53 driver-btm-api.c:1167:miner_device_init: Detect 256MB control board of XILINX 2021-10-24 23:14:53 driver-btm-api.c:1115:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2021-10-24 23:14:53 thread.c:885:create_read_nonce_reg_thread: create thread 2021-10-24 23:14:59 driver-btm-api.c:1099:init_miner_version: miner ID : 81384c2c5c208814 2021-10-24 23:14:59 driver-btm-api.c:1105:init_miner_version: FPGA Version = 0xB013 2021-10-24 23:15:01 eeprom.c:431:check_pattern_test_level: L1 board 2021-10-24 23:15:03 eeprom.c:431:check_pattern_test_level: L1 board 2021-10-24 23:15:04 eeprom.c:431:check_pattern_test_level: L1 board 2021-10-24 23:15:04 driver-btm-api.c:737:get_product_id: product_id[0] = 1 2021-10-24 23:15:04 driver-btm-api.c:737:get_product_id: product_id[1] = 1 2021-10-24 23:15:04 driver-btm-api.c:737:get_product_id: product_id[2] = 1 2021-10-24 23:15:04 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[0] = 1 2021-10-24 23:15:04 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[1] = 1 2021-10-24 23:15:04 driver-btm-api.c:1666:get_ccdly_opt: ccdly_opt[2] = 1 2021-10-24 23:15:04 driver-btm-api.c:1919:bitmain_board_init: g_ccdly_opt = 1 2021-10-24 23:15:04 driver-btm-api.c:676:_set_project_type: project:2 2021-10-24 23:15:04 driver-btm-api.c:706:_set_project_type: Project type: Antminer T17 2021-10-24 23:15:04 driver-btm-api.c:717:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2021-10-24 23:15:04 driver-btm-api.c:718:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2021-10-24 23:15:04 driver-btm-api.c:717:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2021-10-24 23:15:04 driver-btm-api.c:718:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2021-10-24 23:15:04 driver-btm-api.c:717:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2021-10-24 23:15:04 driver-btm-api.c:718:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2021-10-24 23:15:05 driver-btm-api.c:1939:bitmain_board_init: Fan check passed. 2021-10-24 23:15:07 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2021-10-24 23:15:11 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9 2021-10-24 23:15:12 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2021-10-24 23:15:16 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9 2021-10-24 23:15:18 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2021-10-24 23:15:21 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9 2021-10-24 23:15:21 thread.c:880:create_pic_heart_beat_thread: create thread 2021-10-24 23:15:21 power_api.c:55:power_init: power init ... 2021-10-24 23:15:21 driver-btm-api.c:1949:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2021-10-24 23:15:53 power_api.c:232:set_iic_power_to_highest_voltage: setting to voltage: 17.00 ... 2021-10-24 23:15:59 power_api.c:124:check_voltage_multi: retry time: 0 2021-10-24 23:16:01 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.732344 2021-10-24 23:16:02 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.071054 2021-10-24 23:16:04 power_api.c:86:get_average_voltage: chain[2], voltage is: 16.936347 2021-10-24 23:16:04 power_api.c:97:get_average_voltage: aveage voltage is: 17.246582 2021-10-24 23:16:04 power_api.c:182:set_iic_power_by_voltage: now set voltage to : 17.000000 2021-10-24 23:16:04 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26 2021-10-24 23:16:16 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[0]: find 30 asic, times 0 2021-10-24 23:16:26 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[1]: find 30 asic, times 0 2021-10-24 23:16:36 driver-btm-api.c:1042:check_asic_number_with_power_on: Chain[2]: find 30 asic, times 0 2021-10-24 23:16:39 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1 2021-10-24 23:16:39 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1 2021-10-24 23:16:40 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1 2021-10-24 23:16:40 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0xb4 2021-10-24 23:16:40 uart.c:80:set_baud: set fpga_baud = 3000000, fpga_divider = 0 2021-10-24 23:16:40 driver-btm-api.c:1693:check_clock_counter: freq 50 clock_counter_limit 6 2021-10-24 23:16:41 uart.c:80:set_baud: set fpga_baud = 115200, fpga_divider = 26 2021-10-24 23:16:41 voltage[0] = 1730 2021-10-24 23:16:41 voltage[1] = 1730 2021-10-24 23:16:41 voltage[2] = 1730 2021-10-24 23:16:41 power_api.c:140:set_working_voltage: working_voltage = 17.300000 2021-10-24 23:16:42 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. 2021-10-24 23:16:43 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. 2021-10-24 23:16:45 temperature.c:282:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. 2021-10-24 23:16:45 uart.c:80:set_baud: set fpga_baud = 6000000, fpga_divider = 3 2021-10-24 23:16:46 driver-btm-api.c:252:check_bringup_temp: Bring up temperature is 26 2021-10-24 23:16:46 thread.c:900:create_check_miner_status_thread: create thread 2021-10-24 23:16:46 thread.c:890:create_set_miner_status_thread: create thread 2021-10-24 23:16:46 driver-btm-api.c:613:calculate_timeout: dev->timeout = 392 2021-10-24 23:16:46 thread.c:875:create_temperature_monitor_thread: create thread 2021-10-24 23:16:46 freq_tuning.c:159:freq_tuning_get_max_freq: Max freq of tuning is 760 2021-10-24 23:16:46 power_api.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 18.00 ... 2021-10-24 23:17:19 power_api.c:124:check_voltage_multi: retry time: 0 2021-10-24 23:17:21 power_api.c:86:get_average_voltage: chain[0], voltage is: 17.989511 2021-10-24 23:17:22 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.848681 2021-10-24 23:17:24 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.946650 2021-10-24 23:17:24 power_api.c:97:get_average_voltage: aveage voltage is: 17.928281 2021-10-24 23:19:05 thread.c:734:check_temperature: over max temp, pcb temp 72 (max 80), chip temp 104(max 103) 2021-10-24 23:19:05 driver-btm-api.c:205:set_miner_status: ERROR_TEMP_TOO_HIGH 2021-10-24 23:19:05 driver-btm-api.c:146:stop_mining: stop mining: over max temp 2021-10-24 23:19:05 thread.c:920:cancel_temperature_monitor_thread: cancel thread 2021-10-24 23:19:05 thread.c:930:cancel_read_nonce_reg_thread: cancel thread 2021-10-24 23:19:05 driver-btm-api.c:131:killall_hashboard: ****power off hashboard**** 2021-10-24 23:19:33 driver-btm-api.c:644:set_timeout: freq 700 final timeout=168 2021-10-24 23:19:33 power_api.c:397:slowly_set_iic_power_to_working_voltage: slowly setting to voltage: 17.30 ... 2021-10-24 23:20:00 power_api.c:124:check_voltage_multi: retry time: 0 2021-10-24 23:20:03 power_api.c:86:get_average_voltage: chain[0], voltage is: 18.026250 2021-10-24 23:20:06 power_api.c:86:get_average_voltage: chain[1], voltage is: 17.854804 2021-10-24 23:20:09 power_api.c:86:get_average_voltage: chain[2], voltage is: 17.971142 2021-10-24 23:20:09 power_api.c:97:get_average_voltage: aveage voltage is: 17.950732 2021-10-24 23:20:09 frequency.c:654:get_current_min_freq: current min freq 700 2021-10-24 23:20:09 driver-btm-api.c:1693:check_clock_counter: freq 700 clock_counter_limit 89 2021-10-24 23:20:12 register.c:1416:quick_dump_core_hash_clock_counter: bad clock counter. chain = 0, asic = 5, core = 0, found 0, clock counter 0x00000000 2021-10-24 23:20:12 driver-btm-api.c:2139:bitmain_soc_init: clock count check failed after retry, wait for hash rate protect later. 2021-10-24 23:20:12 thread.c:895:create_check_system_status_thread: create thread 2021-10-24 23:20:13 driver-btm-api.c:2155:bitmain_soc_init: Init done! 2021-10-24 23:20:13 driver-btm-api.c:205:set_miner_status: STATUS_INIT 2021-10-24 23:20:18 driver-btm-api.c:205:set_miner_status: STATUS_OKAY 2021-10-24 23:20:22 driver-btm-api.c:1325:dhash_chip_send_job: Version num 4 2021-10-24 23:37:52 driver-btm-api.c:1325:dhash_chip_send_job: Version num 1 2021-10-24 23:38:22 driver-btm-api.c:1325:dhash_chip_send_job: Version num 4
Title: Re: T17 not hashing
Post by: wndsnb on October 25, 2021, 01:05:32 AM
2021-10-24 23:19:05 thread.c:734:check_temperature: over max temp, pcb temp 72 (max 80), chip temp 104(max 103) 2021-10-24 23:19:05 driver-btm-api.c:205:set_miner_status: ERROR_TEMP_TOO_HIGH 2021-10-24 23:19:05 driver-btm-api.c:146:stop_mining: stop mining: over max temp 2021-10-24 23:19:05 thread.c:920:cancel_temperature_monitor_thread: cancel thread 2021-10-24 23:19:05 thread.c:930:cancel_read_nonce_reg_thread: cancel thread 2021-10-24 23:19:05 driver-btm-api.c:131:killall_hashboard: ****power off hashboard****
Looks like it is overheating. What is the room temperature where you're running it? Also, what firmware is it running? 103deg C for the maximum chip temp seems too high. Thought it was normally 90deg C. Can you post a screenshot of the status page?
Title: Re: T17 not hashing
Post by: Nthny77 on October 25, 2021, 01:23:57 AM
Title: Re: T17 not hashing
Post by: wndsnb on October 25, 2021, 01:41:29 AM
Chip temps are way to high for 23deg room temp. Are the fans running at full speed during startup? They should be very loud. Like hard to have a conversation in the same room loud.
I'd start by flashing stock firmware. Probably best to flash it with a SD card rather than the GUI because whoever "refurbished" your miner may have put some nasty firmware on there and you might not be able to get rid of it through the GUI.
Title: Re: T17 not hashing
Post by: robertpaulsen on October 25, 2021, 09:42:48 AM
It seems that one of your hashboards has decent temperature, so possibly the other two could have heatsinks fallen off. Or the fans aren't blowing in the right direction.
Title: Re: T17 not hashing
Post by: BitMaxz on October 25, 2021, 03:38:54 PM
Your miner is running with the latest version of firmware according to your logs 2021-10-24 23:14:53 driver-btm-api.c:2031:bitmain_soc_init: Miner compile time: Thu Apr 23 16:29:07 CST 2020 type: Antminer T17 2021-10-24 23:14:53 driver-btm-api.c:2032:bitmain_soc_init: commit version: 1c5be6f 2020-04-20 16:18:14, build by: lol 2020-04-23 16:35:04 So I don't think that the miner has hacked firmware. but flashing it through an SD card is worth trying. @Nthny77 Did you properly set up your miner airflow I mean did you exhaust the heat from your miner? If you have an exhaust and bring the heat outside this shouldn't cause "ERROR_TEMP_TOO_HIGH" or maybe robertpaulsen is right checking it physically if there are some heatsink fallen. And another thing that I would like to suggest is to edit your whole post above and use a code tag with the icon "#" to make your thread clean not look messy.
Title: Re: T17 not hashing
Post by: Nthny77 on November 09, 2021, 01:36:09 AM
Hello again, thank you for all the comments.
Following up on my problem I increased my ventilation with 2 of these: https://www.amazon.ca/gp/product/B07FPFVZTZ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
It has solved my temperature problems. I do notice the fans are running at max rpm but I am unsure if I should be concerned. It is operating in a box with x2 - 6inch ducts (in and out, so x4).
Here is my current status page: https://imgur.com/a/Z3tvQ5u
Title: Re: T17 not hashing
Post by: BitMaxz on November 09, 2021, 03:45:23 PM
It has solved my temperature problems. I do notice the fans are running at max rpm but I am unsure if I should be concerned. It is operating in a box with x2 - 6inch ducts (in and out, so x4).
The status seems fine so nothing to worry about the RPM unless if you want to reduce the noise and power consumption. You can able to change the fan speed if you want you can follow the guide from mikeywith guide here (https://bitcointalk.org/index.php?topic=5202112.0) since you already have a cooling booster I guess it will stay at the same RPM.
Title: Re: T17 not hashing
Post by: robertpaulsen on November 09, 2021, 06:20:49 PM
Here is my current status page: https://imgur.com/a/Z3tvQ5u
Those chip temps on board #2 look pretty high compared to pcb temp and other boards...
Title: Re: T17 not hashing
Post by: mikeywith on November 09, 2021, 09:42:21 PM
Those chip temps on board #2 look pretty high compared to pcb temp and other boards...
It's pretty normal for the chips on the middle dashboard to run slightly hotter than the other two, the difference in that picture is a bit over the average but nothing concerning to me at least, I have seen far greater variance than this, it could also be caused by something blocking the airway in the heatsink around the sensor that reports 82c. if this was another gear I would advise him to clean it, but since this is a T17, I rather not touch them if they work, I remember a bunch of heatsinks coming off when I used an air blower to clean them, it's like they installed them using saliva instead of solder.
Title: Re: T17 not hashing
Post by: BitMaxz on November 09, 2021, 11:21:02 PM
Those chip temps on board #2 look pretty high compared to pcb temp and other boards...
But still, it's far from the maximum ranges better check the temp ranges here "Miner normal operating temperature range (https://support.bitmain.com/hc/en-us/articles/360005088914-Miner-normal-operating-temperature-range)" if this was another gear I would advise him to clean it, but since this is a T17, I rather not touch them if they work, I remember a bunch of heatsinks coming off when I used an air blower to clean them, it's like they installed them using saliva instead of solder.
That is why I always recommend using a brush to clean out the dust while blowing because sometimes blowing the dust without brushing cause some problems and issue. I do recommend this brush https://i.imgur.com/t8Zyd0K.pngWhile slightly blowing it with air.
Title: Re: T17 not hashing
Post by: Nthny77 on November 12, 2021, 03:05:35 AM
I opened it up and used the vacuum with light brush to clean, did not pull the hashboards out but Ill do that one day need to learn it.
I did a few more improvements on my ventilation and it looks to be running better again. etc Taped my seals and gaps, used clamps instead of zip ties, added ducting support.
Interesting my fans speeds are now much lower, the sound is very good, like a loud bedroom fan.
SS below https://imgur.com/a/hygPtSv
|