Title: problem with my a1 Post by: johnnyFl on April 05, 2022, 10:41:32 PM Hello friends i am new at mining. One of my cards on my a1 suddently stopped hashing(seems 0mh). I reboot my machine and i only see three cards(chains). I saw the log file and i thin i detect the problem, but i cant understand what it really is.
First a problem with chain 1 chain1: power down Apr 06 04:28:52 rockchip cgminer[286]: fan0 speed:5760, fan1 speed:5880 Apr 06 04:28:53 rockchip cgminer[286]: chain1: encore first mode Apr 06 04:28:56 rockchip cgminer[286]: dm_compat.c,5164: poll fail ! Apr 06 04:28:56 rockchip cgminer[286]: spi_cmd_reset poll fail ! Apr 06 04:28:56 rockchip cgminer[286]: failed to reset chain 1!,try again Apr 06 04:28:57 rockchip cgminer[286]: fan0 speed:5820, fan1 speed:5880 Apr 06 04:28:59 rockchip cgminer[286]: dm_compat.c,5164: poll fail ! Apr 06 04:28:59 rockchip cgminer[286]: spi_cmd_reset poll fail ! Apr 06 04:28:59 rockchip cgminer[286]: failed to reset chain 1!,try again Apr 06 04:29:02 rockchip cgminer[286]: dm_compat.c,5164: poll fail ! Apr 06 04:29:02 rockchip cgminer[286]: spi_cmd_reset poll fail ! Apr 06 04:29:02 rockchip cgminer[286]: failed to reset chain 1!,try again Apr 06 04:29:02 rockchip cgminer[286]: fan0 speed:5790, fan1 speed:5820 Apr 06 04:29:05 rockchip cgminer[286]: dm_compat.c,5164: poll fail ! Apr 06 04:29:05 rockchip cgminer[286]: spi_cmd_reset poll fail ! . .what is first and second mode? . chain1: encore second mode Apr 06 04:29:17 rockchip cgminer[286]: fan0 speed:5790, fan1 speed:5820 Apr 06 04:29:21 rockchip cgminer[286]: dm_compat.c,5164: poll fail ! Apr 06 04:29:21 rockchip cgminer[286]: spi_cmd_reset poll fail ! Apr 06 04:29:21 rockchip cgminer[286]: failed to reset chain 1!,try again Apr 06 04:29:22 rockchip cgminer[286]: fan0 speed:5850, fan1 speed:5880 Apr 06 04:29:24 rockchip cgminer[286]: 1: detected 72 chips Apr 06 04:29:24 rockchip cgminer[286]: collect core success Apr 06 04:29:24 rockchip cgminer[286]: chain1: pre init OK, retries:1 . .and at the same session problem but with chain 3(only one card is off) .first 54 ppls set ok Apr 06 05:39:16 rockchip cgminer[292]: Chain 3 VID 0 voltage 410.6 Apr 06 05:39:16 rockchip cgminer[292]: Chain 3 unable to get above target voltage 425 by VID 0 Apr 06 05:39:16 rockchip cgminer[292]: B1 chain[3] set pll, start_pll:54, target_pll:120 Apr 06 05:39:16 rockchip cgminer[292]: T1 3 set default 54 PLL success Apr 06 05:39:16 rockchip cgminer[292]: T1 3 set default 55 PLL success . .all between ppls are ok . Apr 06 05:39:21 rockchip cgminer[292]: T1 3 set default 91 PLL success Apr 06 05:39:21 rockchip cgminer[292]: T1 3 set default 92 PLL success Apr 06 05:39:21 rockchip cgminer[292]: T1 3 set default 93 PLL success Apr 06 05:39:21 rockchip cgminer[292]: T1 3 set default 94 PLL success Apr 06 05:39:21 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:21 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:21 rockchip cgminer[292]: Failed to set PLL Lv.95 on T1 3 in T1_SetT1PLLClock Apr 06 05:39:21 rockchip cgminer[292]: set default PLL fail Apr 06 05:39:21 rockchip cgminer[292]: spi_cmd_read_write_reg0d poll fail ! Apr 06 05:39:21 rockchip cgminer[292]: spi_cmd_read_register poll fail ! . .same error multiple times . Apr 06 05:39:21 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:21 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:21 rockchip cgminer[292]: chain3 find_chain_vid: start_vid = 0, target_volt = 407 Apr 06 05:39:21 rockchip cgminer[292]: spi_cmd_read_register poll fail ! Apr 06 05:39:21 rockchip cgminer[292]: failed to read voltage for chain3 chip1 Apr 06 05:39:21 rockchip cgminer[292]: spi_cmd_read_register poll fail ! Apr 06 05:39:21 rockchip cgminer[292]: failed to read voltage for chain3 chip2 Apr 06 05:39:21 rockchip cgminer[292]: spi_cmd_read_register poll fail ! . . Apr 06 05:39:21 rockchip cgminer[292]: spi_cmd_read_register poll fail ! Apr 06 05:39:21 rockchip cgminer[292]: failed to read voltage for chain3 chip70 Apr 06 05:39:21 rockchip cgminer[292]: spi_cmd_read_register poll fail ! Apr 06 05:39:21 rockchip cgminer[292]: failed to read voltage for chain3 chip71 Apr 06 05:39:21 rockchip cgminer[292]: spi_cmd_read_register poll fail ! Apr 06 05:39:21 rockchip cgminer[292]: failed to read voltage for chain3 chip72 Apr 06 05:39:21 rockchip cgminer[292]: Chain 3 VID 0 voltage nan Apr 06 05:39:23 rockchip cgminer[292]: spi_cmd_read_register poll fail ! . .72 chips fails again . Apr 06 05:39:24 rockchip cgminer[292]: Chain 3 VID 0 voltage nan Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_read_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: fan0 speed:5790, fan1 speed:6240 Apr 06 05:39:25 rockchip cgminer[292]: chain_detect: chain: 0, n_chips: 0 Apr 06 05:39:26 rockchip cgminer[292]: Chain 0 Voltage information. Highest Vol:435, Average Vol:416, Lowest Vol:402 Apr 06 05:39:26 rockchip cgminer[292]: 0: found 72 chips with total 2304 active cores Apr 06 05:39:27 rockchip cgminer[292]: Chain 0 Post Balance Voltage. Highest Vol:435.000000, Average Vol:416.000000, Lowest Vol:400.000000. Apr 06 05:39:28 rockchip cgminer[292]: chain_detect: chain: 1, n_chips: 0 Apr 06 05:39:28 rockchip cgminer[292]: Chain 1 Voltage information. Highest Vol:438, Average Vol:419, Lowest Vol:397 Apr 06 05:39:29 rockchip cgminer[292]: 1: found 72 chips with total 2304 active cores Apr 06 05:39:29 rockchip cgminer[292]: Chain 1 Post Balance Voltage. Highest Vol:438.000000, Average Vol:419.000000, Lowest Vol:397.000000. Apr 06 05:39:29 rockchip cgminer[292]: fan0 speed:5880, fan1 speed:6210 Apr 06 05:39:30 rockchip cgminer[292]: chain_detect: chain: 2, n_chips: 0 Apr 06 05:39:31 rockchip cgminer[292]: Chain 2 Voltage information. Highest Vol:435, Average Vol:414, Lowest Vol:397 Apr 06 05:39:31 rockchip cgminer[292]: 2: found 72 chips with total 2304 active cores Apr 06 05:39:32 rockchip cgminer[292]: Chain 2 Post Balance Voltage. Highest Vol:435.000000, Average Vol:414.000000, Lowest Vol:397.000000. Apr 06 05:39:32 rockchip cgminer[292]: Detected the 0 B1 chain with 72 chips / 2304 cores Apr 06 05:39:32 rockchip cgminer[292]: Detected the 1 B1 chain with 72 chips / 2304 cores Apr 06 05:39:32 rockchip cgminer[292]: Detected the 2 B1 chain with 72 chips / 2304 cores Apr 06 05:39:32 rockchip cgminer[292]: B1 detect finish seems that chain 3 is dead but something wrong with chain 1? My miner its not new but second hand Title: Re: problem with my a1 Post by: BitMaxz on April 05, 2022, 11:15:24 PM Is that Love core Aisen a1 miner?
Actually, there is no official support for this unit here or website but I will try to help you find a solution to your problem. Would you mind posting the whole logs make sure it is the whole logs and put them into the insert code tag a # button you can find them when you edit your post above or if you have limited character use pastebin.com and paste the logs there and paste the URL here For now the only thing that I could suggest is to try to flash it you can download the firmware from their old link below - https://pan.baidu.com/s/19lVmLi85rNEzgKoVImAaQg extraction code: n7h3 Title: Re: problem with my a1 Post by: johnnyFl on April 06, 2022, 08:16:47 AM https://pastebin.com/iz0t13pi (https://pastebin.com/iz0t13pi)
Title: Re: problem with my a1 Post by: BitMaxz on April 06, 2022, 05:53:49 PM Chain 1 got some error at the first run but it works for a while. Unlike chain 3 stop working causes a low hash rate.
Would you mind trying to run them one by one or only chain 3 if it can run stable and know if the PSU is not giving enough power? Also, try to clean up all PSU terminals and swap all cables to another hashboard then check for changes. Title: Re: problem with my a1 Post by: johnnyFl on April 07, 2022, 10:41:43 AM if found out that the wire wasnt good, so i replaced it. But the 4 hashbord heat the wire melt, so i found another hashboard and everything is fine. What is the second mode?
Title: Re: problem with my a1 Post by: BitMaxz on April 07, 2022, 11:11:53 PM if found out that the wire wasnt good, so i replaced it. But the 4 hashbord heat the wire melt, so i found another hashboard and everything is fine. What is the second mode? Where did you get a replacement wire? It will melt if you are using very thin wire or cables. I'm a bit confused do you have stocks of hashboard as a replacement? What exactly second mode are you talking about? A mostly short circuit is the reason why wire and cables are melting without a multitester we do not know if the hashboard is shorted or not. If I were you hire a professional Hashboard technician to repair your hashboard you can check this https://www.zeusbtc.com/ASIC-Miner-Repair/ You can also get an idea of how to repair hashboard at the bottom of that page. Title: Re: problem with my a1 Post by: obiee77 on April 24, 2022, 04:43:39 PM Hello,
I am planning to buy a Aisen A1 Pro. Are these reliable machines? I know some miners have trouble operating under high heat such as the avalonminer and some are better at higher heats such as whatsminer. How would you rate these Aisen miners? Overall, would you recommend these miners? FYI, I basically have access to almost free electricity. Best, Obi Title: Re: problem with my a1 Post by: BitMaxz on April 24, 2022, 10:20:10 PM Hello, I am planning to buy a Aisen A1 Pro. Are these reliable machines? I know some miners have trouble operating under high heat such as the avalonminer and some are better at higher heats such as whatsminer. How would you rate these Aisen miners? Overall, would you recommend these miners? FYI, I basically have access to almost free electricity. Best, Obi Not a good option if you are going to buy this unit there is no support here or support website for this unit. I suggest you better ASIC miners that have support like Antminer. If you want to look for a list of manufacturers then I suggest you read this thread - https://bitcointalk.org/index.php?topic=5045732.0 Title: Re: problem with my a1 Post by: tornado_blade on April 28, 2022, 01:34:27 PM Apr 06 05:39:24 rockchip cgminer[292]: Chain 3 VID 0 voltage nan Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_read_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: dm_compat.c,5164: poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: spi_cmd_write_register poll fail ! Apr 06 05:39:24 rockchip cgminer[292]: fan0 speed:5790, fan1 speed:6240 Apr 06 05:39:25 rockchip cgminer[292]: chain_detect: chain: 0, n_chips: 0 Apr 06 05:39:26 rockchip cgminer[292]: Chain 0 Voltage information. Highest Vol:435, Average Vol:416, Lowest Vol:402 Apr 06 05:39:26 rockchip cgminer[292]: 0: found 72 chips with total 2304 active cores Apr 06 05:39:27 rockchip cgminer[292]: Chain 0 Post Balance Voltage. Highest Vol:435.000000, Average Vol:416.000000, Lowest Vol:400.000000. Apr 06 05:39:28 rockchip cgminer[292]: chain_detect: chain: 1, n_chips: 0 Apr 06 05:39:28 rockchip cgminer[292]: Chain 1 Voltage information. Highest Vol:438, Average Vol:419, Lowest Vol:397 Apr 06 05:39:29 rockchip cgminer[292]: 1: found 72 chips with total 2304 active cores Apr 06 05:39:29 rockchip cgminer[292]: Chain 1 Post Balance Voltage. Highest Vol:438.000000, Average Vol:419.000000, Lowest Vol:397.000000. Apr 06 05:39:29 rockchip cgminer[292]: fan0 speed:5880, fan1 speed:6210 Apr 06 05:39:30 rockchip cgminer[292]: chain_detect: chain: 2, n_chips: 0 Apr 06 05:39:31 rockchip cgminer[292]: Chain 2 Voltage information. Highest Vol:435, Average Vol:414, Lowest Vol:397 Apr 06 05:39:31 rockchip cgminer[292]: 2: found 72 chips with total 2304 active cores Apr 06 05:39:32 rockchip cgminer[292]: Chain 2 Post Balance Voltage. Highest Vol:435.000000, Average Vol:414.000000, Lowest Vol:397.000000. Apr 06 05:39:32 rockchip cgminer[292]: Detected the 0 B1 chain with 72 chips / 2304 cores Apr 06 05:39:32 rockchip cgminer[292]: Detected the 1 B1 chain with 72 chips / 2304 cores Apr 06 05:39:32 rockchip cgminer[292]: Detected the 2 B1 chain with 72 chips / 2304 cores Apr 06 05:39:32 rockchip cgminer[292]: B1 detect finish seems that chain 3 is dead but something wrong with chain 1? My miner its not new but second hand check your psu and replace with another one. maybe your psu is bad. |