|
Title: Can't connect Antminer S1 to Pool Post by: AndrewE on March 27, 2014, 04:46:37 PM Please Help! I have my Antminer S1 all setup now: PSU setup, IP address changed, and pool info entered. However, it doesn't seem to be mining. I think there is a connection problem. I took screenshots of everything here in this album: https://imgur.com/a/9EK94
Can someone please suggest a solution. Thank you! Title: Re: Can't connect Antminer S1 to Pool Post by: black3000gt on March 29, 2014, 06:19:27 AM is your network cable connected properly to your router and the miner? Are the LEDs on the network connector blinking? Do you hear anything beeping? Might want to try a factory reset and see if it mines before you change anything. Have you checked to make sure nothing else is assigned to the IP you gave the miner?
Title: Re: Can't connect Antminer S1 to Pool Post by: AndrewE on April 01, 2014, 05:38:08 AM My ethernet cable between my PC and miner is secure. The LED lights are blinking no sound though. I have an adequate PSU (750W). I've already done a factory reset and tried changing the IP address several times.
Title: Re: Can't connect Antminer S1 to Pool Post by: crazy987 on April 01, 2014, 09:21:23 AM Is there a firewall in your router which is blocking traffic?
Or maybe the ISP itself? Title: Re: Can't connect Antminer S1 to Pool Post by: Finnius on August 08, 2014, 02:07:13 AM Did you solve this problem - i have the same issue?
Thanks |