Title: S9j 0 hashing Post by: PanTheo91 on May 26, 2022, 01:11:57 PM Hello everyone, i am facing a problem to one of my S9J's that not hashing. PSU Working fine
here is kernel log: https://pastebin.com/fMWvqc8r Thanks in advance Title: Re: S9j 0 hashing Post by: BitMaxz on May 26, 2022, 05:13:24 PM Based on the logs below read temp error it means that your control board can't detect any temp signal from your hashboard.
Code: Max pcb temp : 0 One of your hash boards might have a broken temp sensor or ribbon wires that are not plugged properly. Try to re-plug all of your ribbon wires then check it again through logs or if it's hashing. If still do not work then you can bypass this issue by flashing your unit with modded firmware like asic.to firmware or Braiins OS. Title: Re: S9j 0 hashing Post by: PanTheo91 on May 26, 2022, 10:09:33 PM Thank you for your help
Title: Re: S9j 0 hashing Post by: rust-project on May 27, 2022, 06:24:08 AM I think the control board is broken.
|