Title: dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! Post by: odinloz92 on June 15, 2022, 09:54:53 PM Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc:
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 197340K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 32036K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 18996K (cc873000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 13/6, WL threshold: 4096, image sequence number: 962584129 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F3CF9EBA-AB9B-40C1-90D1-D87EAC95E58B, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 5723/3794, WL threshold: 4096, image sequence number: 1480851491 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID D014EEBF-9836-4B4F-B935-5D58BB40C952, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab01b In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized [2022-06-15 21:40:44.151] start listen on 6060 ... [2022-06-15 21:45:04.512] set_start_time_point total_tv_start_sys=975 total_tv_end_sys=976 2022-06-15 21:40:14 driver-btm-soc.c:7273:init_freq_mode: This is scan-user version 2022-06-15 21:40:14 driver-btm-soc.c:8125:bitmain_soc_init: T15 2022-06-15 21:40:14 driver-btm-soc.c:8126:bitmain_soc_init: opt_multi_version=1 2022-06-15 21:40:14 driver-btm-soc.c:8127:bitmain_soc_init: opt_bitmain_ab=1 2022-06-15 21:40:14 driver-btm-soc.c:8128:bitmain_soc_init: opt_bitmain_economic_mode=false 2022-06-15 21:40:14 driver-btm-soc.c:8129:bitmain_soc_init: opt_bitmain_work_mode_test = 0 2022-06-15 21:40:14 driver-btm-soc.c:7682:_show_sn: no SN got, please write SN to /nvdata/sn 2022-06-15 21:40:14 driver-btm-soc.c:7304:init_phy_mem_nonce2_jobid_address: Detect 256MB control board of XILINX 2022-06-15 21:40:14 driver-btm-soc.c:8149:bitmain_soc_init: Miner compile time: Fri Dec 13 15:46:16 CST 2019 type: Antminer T15 2022-06-15 21:40:14 driver-btm-soc.c:8151:bitmain_soc_init: last commit version: 53156cb commit time: 2019-11-06 10:21:42 build: 2019-12-13 15:53:57 2022-06-15 21:40:14 driver-btm-soc.c:7336:check_fan_multi: check fan for 20 times... 2022-06-15 21:40:16 driver-btm-soc.c:8214:bitmain_soc_init: miner ID : 806815801c20881c 2022-06-15 21:40:16 driver-btm-soc.c:7410:init_miner_version: FPGA Version = 0xB01B 2022-06-15 21:40:16 driver-btm-soc.c:1092:check_chain: get_hash_on_plug is 0x7 2022-06-15 21:40:16 driver-btm-soc.c:1104:check_chain: !! chain[0]is exist 2022-06-15 21:40:16 driver-btm-soc.c:1104:check_chain: !! chain[1]is exist 2022-06-15 21:40:16 driver-btm-soc.c:1104:check_chain: !! chain[2]is exist 2022-06-15 21:40:24 eeprom.c:1418:eeprom_load: done 2022-06-15 21:40:24 driver-btm-soc.c:7431:init_pcb_version: chain[0] PCB Version : 0x0101 2022-06-15 21:40:24 driver-btm-soc.c:7449:init_pcb_version: chain[0] BOM Version : 0x0100 2022-06-15 21:40:24 driver-btm-soc.c:7431:init_pcb_version: chain[1] PCB Version : 0x0101 2022-06-15 21:40:24 driver-btm-soc.c:7449:init_pcb_version: chain[1] BOM Version : 0x0100 2022-06-15 21:40:24 driver-btm-soc.c:7431:init_pcb_version: chain[2] PCB Version : 0x0101 2022-06-15 21:40:24 driver-btm-soc.c:7449:init_pcb_version: chain[2] BOM Version : 0x0100 2022-06-15 21:40:24 dspic33ep16gs202.c:538:reset_pic: chain[0] ok 2022-06-15 21:40:29 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[0] ok 2022-06-15 21:40:29 dspic33ep16gs202.c:538:reset_pic: chain[1] ok 2022-06-15 21:40:34 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[1] ok 2022-06-15 21:40:34 dspic33ep16gs202.c:538:reset_pic: chain[2] ok 2022-06-15 21:40:39 dspic33ep16gs202.c:504:jump_to_app_from_loader: chain[2] ok 2022-06-15 21:40:39 power.c:137:power_init: power init ... 2022-06-15 21:40:39 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 2 2022-06-15 21:40:39 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 1 2022-06-15 21:40:39 driver-btm-soc.c:3130:heart_beat_func_one_chain: for chain 0 2022-06-15 21:40:41 dspic33ep16gs202.c:409:hashboard_power_cntl:
2022-06-15 21:41:15 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[0] = 19.500000 2022-06-15 21:41:15 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[1] = 19.500000 2022-06-15 21:41:15 driver-btm-soc.c:7626:set_working_voltage_by_eeprom: eeprom voltage[2] = 19.500000 2022-06-15 21:41:15 driver-btm-soc.c:7630:set_working_voltage_by_eeprom: max = 19.50, min = 19.50 2022-06-15 21:41:15 power.c:149:set_working_voltage: working_voltage = 19.500000 2022-06-15 21:41:15 power.c:274:set_iic_power_to_highest_voltage: setting to voltage: 20.00 ... 2022-06-15 21:41:15 power.c:227:set_iic_power_by_voltage: now setting voltage to : 20.000000 2022-06-15 21:41:16 eeprom.c:840:travel_eeprom_store: chain[0] data in eeprom is: magic number: 0x7f freq data per ASIC: IC[000]:435 IC[001]:435 IC[002]:420 IC[003]:435 IC[004]:405 IC[005]:405 IC[006]:420 IC[007]:435 IC[008]:435 IC[009]:435 IC[010]:435 IC[011]:435 IC[012]:435 IC[013]:420 IC[014]:405 IC[015]:405 IC[016]:435 IC[017]:420 IC[018]:435 IC[019]:435 IC[020]:435 IC[021]:435 IC[022]:435 IC[023]:420 IC[024]:405 IC[025]:405 IC[026]:435 IC[027]:435 IC[028]:435 IC[029]:420 IC[030]:405 IC[031]:420 IC[032]:435 IC[033]:435 IC[034]:435 IC[035]:420 IC[036]:405 IC[037]:435 IC[038]:435 IC[039]:435 IC[040]:435 IC[041]:435 IC[042]:435 IC[043]:420 IC[044]:405 IC[045]:405 IC[046]:420 IC[047]:435 IC[048]:435 IC[049]:435 IC[050]:435 IC[051]:435 IC[052]:435 IC[053]:420 IC[054]:405 IC[055]:420 IC[056]:405 IC[057]:435 IC[058]:435 IC[059]:435 voltage: 18.80 V hash rate: 06515 GH/s freq data per ASIC in mode2: IC[000]:495 IC[001]:495 IC[002]:495 IC[003]:495 IC[004]:480 IC[005]:480 IC[006]:495 IC[007]:495 IC[008]:495 IC[009]:495 IC[010]:495 IC[011]:495 IC[012]:495 IC[013]:495 IC[014]:480 IC[015]:480 IC[016]:495 IC[017]:495 IC[018]:495 IC[019]:495 IC[020]:495 IC[021]:495 IC[022]:495 IC[023]:495 IC[024]:480 IC[025]:495 IC[026]:495 IC[027]:495 IC[028]:480 IC[029]:495 IC[030]:495 IC[031]:480 IC[032]:495 IC[033]:495 IC[034]:495 IC[035]:495 IC[036]:495 IC[037]:480 IC[038]:495 IC[039]:495 IC[040]:495 IC[041]:495 IC[042]:495 IC[043]:495 IC[044]:480 IC[045]:480 IC[046]:495 IC[047]:495 IC[048]:495 IC[049]:495 IC[050]:495 IC[051]:495 IC[052]:495 IC[053]:495 IC[054]:480 IC[055]:495 IC[056]:480 IC[057]:495 IC[058]:495 IC[059]:495 voltage in mode2: 19.50 V hash rate in mode2: 07512 GH/s 2022-06-15 21:41:16 eeprom.c:840:travel_eeprom_store: chain[1] data in eeprom is: magic number: 0x7f freq data per ASIC: IC[000]:450 IC[001]:450 IC[002]:450 IC[003]:450 IC[004]:435 IC[005]:450 IC[006]:435 IC[007]:450 IC[008]:450 IC[009]:450 IC[010]:450 IC[011]:435 IC[012]:450 IC[013]:450 IC[014]:450 IC[015]:450 IC[016]:435 IC[017]:450 IC[018]:450 IC[019]:450 IC[020]:450 IC[021]:450 IC[022]:435 IC[023]:450 IC[024]:450 IC[025]:450 IC[026]:450 IC[027]:450 IC[028]:450 IC[029]:435 IC[030]:450 IC[031]:450 IC[032]:450 IC[033]:450 IC[034]:435 IC[035]:450 IC[036]:435 IC[037]:450 IC[038]:450 IC[039]:450 IC[040]:450 IC[041]:450 IC[042]:450 IC[043]:450 IC[044]:435 IC[045]:435 IC[046]:450 IC[047]:450 IC[048]:450 IC[049]:450 IC[050]:450 IC[051]:450 IC[052]:450 IC[053]:450 IC[054]:435 IC[055]:435 IC[056]:450 IC[057]:450 IC[058]:450 IC[059]:450 voltage: 18.80 V hash rate: 06849 GH/s freq data per ASIC in mode2: IC[000]:525 IC[001]:525 IC[002]:525 IC[003]:525 IC[004]:510 IC[005]:525 IC[006]:510 IC[007]:525 IC[008]:525 IC[009]:525 IC[010]:525 IC[011]:510 IC[012]:525 IC[013]:525 IC[014]:525 IC[015]:525 IC[016]:510 IC[017]:525 IC[018]:525 IC[019]:525 IC[020]:525 IC[021]:525 IC[022]:510 IC[023]:525 IC[024]:525 IC[025]:525 IC[026]:525 IC[027]:525 IC[028]:525 IC[029]:510 IC[030]:525 IC[031]:525 IC[032]:525 IC[033]:525 IC[034]:510 IC[035]:525 IC[036]:510 IC[037]:525 IC[038]:525 IC[039]:525 IC[040]:525 IC[041]:525 IC[042]:525 IC[043]:525 IC[044]:510 IC[045]:510 IC[046]:525 IC[047]:525 IC[048]:525 IC[049]:525 IC[050]:525 IC[051]:525 IC[052]:525 IC[053]:525 IC[054]:510 IC[055]:510 IC[056]:525 IC[057]:525 IC[058]:525 IC[059]:525 voltage in mode2: 19.50 V hash rate in mode2: 07990 GH/s 2022-06-15 21:41:16 eeprom.c:840:travel_eeprom_store: chain[2] data in eeprom is: magic number: 0x7f freq data per ASIC: IC[000]:435 IC[001]:420 IC[002]:435 IC[003]:435 IC[004]:435 IC[005]:420 IC[006]:435 IC[007]:435 IC[008]:435 IC[009]:435 IC[010]:420 IC[011]:435 IC[012]:435 IC[013]:435 IC[014]:435 IC[015]:435 IC[016]:435 IC[017]:435 IC[018]:420 IC[019]:435 IC[020]:435 IC[021]:435 IC[022]:435 IC[023]:420 IC[024]:435 IC[025]:435 IC[026]:435 IC[027]:420 IC[028]:435 IC[029]:435 IC[030]:435 IC[031]:435 IC[032]:435 IC[033]:420 IC[034]:435 IC[035]:420 IC[036]:435 IC[037]:435 IC[038]:435 IC[039]:435 IC[040]:435 IC[041]:435 IC[042]:435 IC[043]:420 IC[044]:435 IC[045]:435 IC[046]:420 IC[047]:435 IC[048]:435 IC[049]:435 IC[050]:435 IC[051]:435 IC[052]:435 IC[053]:435 IC[054]:420 IC[055]:420 IC[056]:435 IC[057]:435 IC[058]:435 IC[059]:435 voltage: 18.80 V hash rate: 06611 GH/s freq data per ASIC in mode2: IC[000]:495 IC[001]:510 IC[002]:510 IC[003]:510 IC[004]:510 IC[005]:495 IC[006]:510 IC[007]:510 IC[008]:510 IC[009]:510 IC[010]:510 IC[011]:510 IC[012]:510 IC[013]:510 IC[014]:495 IC[015]:510 IC[016]:510 IC[017]:510 IC[018]:495 IC[019]:510 IC[020]:495 IC[021]:510 IC[022]:510 IC[023]:510 IC[024]:510 IC[025]:510 IC[026]:510 IC[027]:495 IC[028]:510 IC[029]:510 IC[030]:510 IC[031]:510 IC[032]:510 IC[033]:495 IC[034]:510 IC[035]:495 IC[036]:510 IC[037]:510 IC[038]:510 IC[039]:510 IC[040]:510 IC[041]:510 IC[042]:510 IC[043]:495 IC[044]:510 IC[045]:510 IC[046]:495 IC[047]:510 IC[048]:510 IC[049]:510 IC[050]:510 IC[051]:510 IC[052]:510 IC[053]:510 IC[054]:495 IC[055]:495 IC[056]:510 IC[057]:510 IC[058]:510 IC[059]:510 voltage in mode2: 19.50 V hash rate in mode2: 07749 GH/s 2022-06-15 21:41:17 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=0! 2022-06-15 21:41:17 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9 2022-06-15 21:41:20 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:41:23 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0 2022-06-15 21:41:23 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 0 2022-06-15 21:41:23 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:23 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0 2022-06-15 21:41:23 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:24 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0 2022-06-15 21:41:24 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:25 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0 2022-06-15 21:41:25 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:26 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0 2022-06-15 21:41:26 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9 2022-06-15 21:41:29 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:41:32 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 0, find asic num = 60 2022-06-15 21:41:33 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=1! 2022-06-15 21:41:33 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2022-06-15 21:41:36 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:41:39 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0 2022-06-15 21:41:39 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 1 2022-06-15 21:41:39 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:39 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1 2022-06-15 21:41:39 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:40 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1 2022-06-15 21:41:40 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:41 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1 2022-06-15 21:41:41 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:42 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1 2022-06-15 21:41:42 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2022-06-15 21:41:45 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:41:48 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 1, find asic num = 60 2022-06-15 21:41:48 dspic33ep16gs202.c:409:hashboard_power_cntl: [1] ok, i2c=2! 2022-06-15 21:41:48 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-06-15 21:41:51 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:41:54 driver-btm-soc.c:5456:check_asic_num_by_pre_open_core: Try to find asic by pre core: times 0 2022-06-15 21:41:54 driver-btm-soc.c:5412:check_asic_num_without_power_off: Open 16 core for chain 2 2022-06-15 21:41:54 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:55 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2 2022-06-15 21:41:55 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:56 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2 2022-06-15 21:41:56 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:57 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2 2022-06-15 21:41:57 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:41:57 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2 2022-06-15 21:41:57 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-06-15 21:42:00 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:42:04 driver-btm-soc.c:5426:check_asic_num_without_power_off: chain 2, find asic num = 60 2022-06-15 21:42:04 driver-btm-soc.c:7238:balance_domain_voltage: To balance voltage domain, open all core and reset hash board after find asic num. 2022-06-15 21:42:04 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 0 2022-06-15 21:42:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:42:04 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0 2022-06-15 21:42:04 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9 2022-06-15 21:42:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:42:10 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 1 2022-06-15 21:42:10 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:42:11 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1 2022-06-15 21:42:11 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2022-06-15 21:42:14 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:42:17 driver-btm-soc.c:7249:balance_domain_voltage: Open core 16 for chain 2 2022-06-15 21:42:17 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:42:18 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2 2022-06-15 21:42:18 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-06-15 21:42:21 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:42:24 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 0 2022-06-15 21:42:24 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32 2022-06-15 21:42:25 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0 2022-06-15 21:42:25 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9 2022-06-15 21:42:28 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:42:31 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 1 2022-06-15 21:42:31 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32 2022-06-15 21:42:33 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1 2022-06-15 21:42:33 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2022-06-15 21:42:36 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:42:39 driver-btm-soc.c:7249:balance_domain_voltage: Open core 32 for chain 2 2022-06-15 21:42:39 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 32 2022-06-15 21:42:40 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2 2022-06-15 21:42:40 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-06-15 21:42:43 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:42:46 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 0 2022-06-15 21:42:46 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64 2022-06-15 21:42:49 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0 2022-06-15 21:42:49 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff9 2022-06-15 21:42:52 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:42:55 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 1 2022-06-15 21:42:55 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64 2022-06-15 21:42:58 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1 2022-06-15 21:42:58 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffa 2022-06-15 21:43:01 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:43:04 driver-btm-soc.c:7249:balance_domain_voltage: Open core 64 for chain 2 2022-06-15 21:43:04 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 64 2022-06-15 21:43:07 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2 2022-06-15 21:43:07 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fffc 2022-06-15 21:43:10 znyq.c:193:set_reset_hashboard: set_reset_hashboard = 0x0000fff8 2022-06-15 21:43:24 driver-btm-soc.c:7475:calculate_timeout: dev->timeout = 857 2022-06-15 21:43:24 driver-btm-soc.c:3012:set_baud: set baud=1 2022-06-15 21:43:24 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2022-06-15 21:43:24 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2022-06-15 21:43:24 chip1391.c:336:set_baud_one_chain: cmd_buf[0]=0x51090018, cmd_buf[1]=0x2101, cmd_buf[2]=0x11000000, misc=0x2101 2022-06-15 21:43:24 driver-btm-soc.c:3023:set_baud: read bc write is 0x82001a 2022-06-15 21:43:24 driver-btm-soc.c:4076:set_clock_delay_control: core_data = 0x04 2022-06-15 21:43:24 driver-btm-soc.c:8293:bitmain_soc_init: Open 1/4 core for reading temperature. 2022-06-15 21:43:24 driver-btm-soc.c:3992:open_core_BM1391_pre_open: pre open core = 16 2022-06-15 21:43:25 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 0 2022-06-15 21:43:26 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 1 2022-06-15 21:43:26 driver-btm-soc.c:3967:pre_open_core_one_chain: for chain 2 2022-06-15 21:43:26 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-06-15 21:43:26 temperature.c:422:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom.. sensor type = 0,sensor num = 4 sensor pos: 15 11 45 41 0 0 0 0 sensor offset: 0 0 0 0 0 0 0 0 2022-06-15 21:43:26 temperature.c:448:calibration_sensor_offset: chain[0] temp chip I2C addr=0x98 2022-06-15 21:43:26 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-06-15 21:43:26 temperature.c:531:calibration_sensor_offset: Warning: Chain[0] has no temp info ! we will fix it 2022-06-15 21:43:26 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131 2022-06-15 21:43:27 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[14] 2022-06-15 21:43:27 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[14] get middle temp offset=-5 typeID=55 2022-06-15 21:43:27 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131 2022-06-15 21:43:28 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[10] 2022-06-15 21:43:28 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[10] get middle temp offset=-5 typeID=55 2022-06-15 21:43:28 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131 2022-06-15 21:43:29 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[44] 2022-06-15 21:43:29 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[44] get middle temp offset=-5 typeID=55 2022-06-15 21:43:29 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131 2022-06-15 21:43:30 temperature.c:553:calibration_sensor_offset: Chain[0] use default temp chip[40] 2022-06-15 21:43:30 temperature.c:562:calibration_sensor_offset: Chain[0] Chip[40] get middle temp offset=-5 typeID=55 2022-06-15 21:43:30 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-06-15 21:43:30 temperature.c:422:calibration_sensor_offset: chain[1] temp info,Bad. Reload from eeprom.. sensor type = 0,sensor num = 4 sensor pos: 15 11 45 41 0 0 0 0 sensor offset: 0 0 0 0 0 0 0 0 2022-06-15 21:43:30 temperature.c:448:calibration_sensor_offset: chain[1] temp chip I2C addr=0x98 2022-06-15 21:43:30 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-06-15 21:43:30 temperature.c:531:calibration_sensor_offset: Warning: Chain[1] has no temp info ! we will fix it 2022-06-15 21:43:30 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131 2022-06-15 21:43:31 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[14] 2022-06-15 21:43:31 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[14] get middle temp offset=-5 typeID=55 2022-06-15 21:43:31 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131 2022-06-15 21:43:32 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[10] 2022-06-15 21:43:32 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[10] get middle temp offset=-5 typeID=55 2022-06-15 21:43:32 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131 2022-06-15 21:43:33 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[44] 2022-06-15 21:43:33 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[44] get middle temp offset=-5 typeID=55 2022-06-15 21:43:33 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131 2022-06-15 21:43:34 temperature.c:553:calibration_sensor_offset: Chain[1] use default temp chip[40] 2022-06-15 21:43:34 temperature.c:562:calibration_sensor_offset: Chain[1] Chip[40] get middle temp offset=-5 typeID=55 2022-06-15 21:43:34 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-06-15 21:43:34 temperature.c:422:calibration_sensor_offset: chain[2] temp info,Bad. Reload from eeprom.. sensor type = 0,sensor num = 4 sensor pos: 15 11 45 41 0 0 0 0 sensor offset: 0 0 0 0 0 0 0 0 2022-06-15 21:43:34 temperature.c:448:calibration_sensor_offset: chain[2] temp chip I2C addr=0x98 2022-06-15 21:43:34 temperature.c:306:is_tempsensor_data_correct: Bad,temp_info.type = 0 2022-06-15 21:43:34 temperature.c:531:calibration_sensor_offset: Warning: Chain[2] has no temp info ! we will fix it 2022-06-15 21:43:34 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41093818, cmd_buf[1]=0x6131, cmd_buf[2]=0x2000000, misc=0x6131 2022-06-15 21:43:35 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[14] 2022-06-15 21:43:35 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[14] get middle temp offset=-5 typeID=55 2022-06-15 21:43:35 chip1391.c:729:set_misc_control: cmd_buf[0]=0x41092818, cmd_buf[1]=0x6131, cmd_buf[2]=0x1000000, misc=0x6131 2022-06-15 21:43:36 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[10] 2022-06-15 21:43:36 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[10] get middle temp offset=-5 typeID=55 2022-06-15 21:43:36 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109b018, cmd_buf[1]=0x6131, cmd_buf[2]=0x9000000, misc=0x6131 2022-06-15 21:43:37 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[44] 2022-06-15 21:43:37 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[44] get middle temp offset=-5 typeID=55 2022-06-15 21:43:37 chip1391.c:729:set_misc_control: cmd_buf[0]=0x4109a018, cmd_buf[1]=0x6131, cmd_buf[2]=0xa000000, misc=0x6131 2022-06-15 21:43:38 temperature.c:553:calibration_sensor_offset: Chain[2] use default temp chip[40] 2022-06-15 21:43:38 temperature.c:562:calibration_sensor_offset: Chain[2] Chip[40] get middle temp offset=-5 typeID=55 2022-06-15 21:43:41 temperature.c:589:do_calibration_temperature_sensor: bring up lowest temperature is 27 ENV 28 FAN 5880 2022-06-15 21:43:49 driver-btm-soc.c:8298:bitmain_soc_init: Boot environment temperature is 28 2022-06-15 21:43:49 driver-btm-soc.c:8308:bitmain_soc_init: set TICKET_MASK 2022-06-15 21:43:49 driver-btm-soc.c:4130:open_core_bm1391: Start Open Core!! 2022-06-15 21:43:56 driver-btm-soc.c:4202:open_core_bm1391: End Open Core!! 2022-06-15 21:43:56 freq_tuning.c:312:freq_tuning_get_max_freq: Max freq of tuning is 550 ENV 28 FAN 5880 2022-06-15 21:43:56 power.c:379:slowly_set_iic_power_to_custom_voltage: slowly setting to voltage: 19.50 ... 2022-06-15 21:43:56 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[22] = 19.920982 2022-06-15 21:43:56 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 20.000000 2022-06-15 21:43:57 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[27] = 19.837553 2022-06-15 21:43:57 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.920982 2022-06-15 21:43:58 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[32] = 19.754124 2022-06-15 21:43:58 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.837553 2022-06-15 21:43:59 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[37] = 19.670696 2022-06-15 21:43:59 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.754124 2022-06-15 21:44:00 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[42] = 19.587267 2022-06-15 21:44:00 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.670696 2022-06-15 21:44:01 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[44] = 19.553896 2022-06-15 21:44:02 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.587267 2022-06-15 21:44:03 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[46] = 19.520524 2022-06-15 21:44:03 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.553896 2022-06-15 21:44:04 power.c:210:get_power_voltage_from_iic_value: iic_index for voltage[47] = 19.503839 2022-06-15 21:44:04 power.c:244:set_iic_power_by_iic_data: now setting voltage to : 19.520524 2022-06-15 21:44:05 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 0. to 480 2022-06-15 21:44:05 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 125.00M 2022-06-15 21:44:06 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 150.00M 2022-06-15 21:44:07 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 175.00M 2022-06-15 21:44:08 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 200.00M 2022-06-15 21:44:09 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 225.00M 2022-06-15 21:44:10 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 250.00M 2022-06-15 21:44:11 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 275.00M 2022-06-15 21:44:12 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 300.00M 2022-06-15 21:44:13 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 325.00M 2022-06-15 21:44:14 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 350.00M 2022-06-15 21:44:15 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 375.00M 2022-06-15 21:44:16 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 400.00M 2022-06-15 21:44:17 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 425.00M 2022-06-15 21:44:18 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 450.00M 2022-06-15 21:44:19 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 475.00M 2022-06-15 21:44:20 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 480.00M 2022-06-15 21:44:24 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 1. to 510 2022-06-15 21:44:24 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 125.00M 2022-06-15 21:44:25 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 150.00M 2022-06-15 21:44:26 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 175.00M 2022-06-15 21:44:27 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 200.00M 2022-06-15 21:44:28 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 225.00M 2022-06-15 21:44:29 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 250.00M 2022-06-15 21:44:30 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 275.00M 2022-06-15 21:44:31 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 300.00M 2022-06-15 21:44:32 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 325.00M 2022-06-15 21:44:33 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 350.00M 2022-06-15 21:44:34 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 375.00M 2022-06-15 21:44:35 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 400.00M 2022-06-15 21:44:36 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 425.00M 2022-06-15 21:44:37 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 450.00M 2022-06-15 21:44:39 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 475.00M 2022-06-15 21:44:40 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 500.00M 2022-06-15 21:44:41 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 510.00M 2022-06-15 21:44:44 driver-btm-soc.c:6651:increase_freq_by_eeprom_slowly: Increase eeprom frequency slowly for chain 2. to 495 2022-06-15 21:44:44 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 125.00M 2022-06-15 21:44:45 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 150.00M 2022-06-15 21:44:46 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 175.00M 2022-06-15 21:44:47 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 200.00M 2022-06-15 21:44:48 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 225.00M 2022-06-15 21:44:49 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 250.00M 2022-06-15 21:44:51 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 275.00M 2022-06-15 21:44:52 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 300.00M 2022-06-15 21:44:53 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 325.00M 2022-06-15 21:44:54 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 350.00M 2022-06-15 21:44:55 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 375.00M 2022-06-15 21:44:56 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 400.00M 2022-06-15 21:44:57 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 425.00M 2022-06-15 21:44:58 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 450.00M 2022-06-15 21:44:59 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 475.00M 2022-06-15 21:45:00 driver-btm-soc.c:4963:increase_freq_slowly: Increase frequency to 495.00M 2022-06-15 21:45:04 driver-btm-soc.c:6051:set_timeout: freq 510 final timeout=462 ENV 28 FAN 6000 2022-06-15 21:45:04 freq_tuning.c:621:freq_tuning_prepare_works: Fail to open test pattern file /dev/91602_pattern_60.txt. 2022-06-15 21:45:04 freq_tuning.c:3090:do_pre_test_for_user_mode: Pre-test cost 0s. 2022-06-15 21:45:05 power.c:458:get_chain_voltage: chain[0], voltage is: 19.64 2022-06-15 21:45:06 power.c:458:get_chain_voltage: chain[1], voltage is: 19.64 2022-06-15 21:45:06 power.c:458:get_chain_voltage: chain[2], voltage is: 19.58 2022-06-15 21:45:06 power.c:482:get_average_voltage: average voltage is: 19.62 2022-06-15 21:45:06 driver-btm-soc.c:8387:bitmain_soc_init: Init done! 2022-06-15 21:45:06 driver-btm-soc.c:8389:bitmain_soc_init: ideal_hash_rate_fixed 23000 2022-06-15 21:45:07 temperature.c:1087:read_temp_func: bring_up_pcb_temp = 30 2022-06-15 21:45:33 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254! 2022-06-15 21:45:35 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254! 2022-06-15 21:45:37 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[0], b[0] = 254, b[2] = 254! 2022-06-15 21:45:38 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254! 2022-06-15 21:45:40 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254! 2022-06-15 21:45:42 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[1], b[0] = 254, b[2] = 254! 2022-06-15 21:45:43 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! 2022-06-15 21:45:45 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! 2022-06-15 21:45:47 dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! 2022-06-15 21:47:17 temperature.c:1126:update_error_status: Fatal Error: network connection lost! 2022-06-15 21:47:17 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 1, error status: 2 2022-06-15 21:47:30 temperature.c:1126:update_error_status: Fatal Error: network connection lost! 2022-06-15 21:47:30 temperature.c:1166:check_error_protect: fatal_error_counter increase as: 2, error status: 2 Title: Re: dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! Post by: BitMaxz on June 15, 2022, 10:44:22 PM Please learn how to put all kernel logs into an insert code tag sample like this
Code: All my kernel logs here If you can't able to or has character limitation you can use pastebin.com and paste the URL here And this is not the right place to post this it should be in the mining support (https://bitcointalk.org/index.php?board=40.0) About your problem, would you mind to try to flash it first with the latest firmware available from Bitmain here (https://shop.bitmain.com/support/download) I also suggest you try to run the unit and test hashboards one by one. The error that I notice is the temp sensor Code: 2022-06-15 21:43:26 temperature.c:422:calibration_sensor_offset: chain[0] temp info,Bad. Reload from eeprom.. That is why I do recommend you to try to test them one by one. Title: Re: dspic33ep16gs202.c:64:volt_clamp: failed on Chain[2], b[0] = 254, b[2] = 254! Post by: GFDhd on July 29, 2022, 02:26:12 AM Did you try changing the firmware? In your kernel log, all 3 boards show no temperature information found. Please swipe the SD card program to restore the control board, and replace a power supply and testing.
|