|
Title: S17 PRO - not hashing!? Post by: kungen12321 on October 27, 2022, 04:00:31 PM Hi!
Last time this forum was to big help so let see if someone know what my problem are. The miner starts up and but doesn`t start to hash. I will post pictures and logs. What I see is that on the System, overview page. For hardware version it says: Socket connect failed: Connection refused Does it says something to you guys? I found myself the problem, I change the pool address and now it`s working. Title: Re: S17 PRO - not hashing!? Post by: BitMaxz on October 27, 2022, 09:27:53 PM That's the common issue for Bitmain units even old units like s9 can experience this issue sometimes the issue is due to an internet connection or the pool you use is currently down/misspelled or sometimes you need to let run it first for hours before it runs normally.
Title: Re: S17 PRO - not hashing!? Post by: Rodemi on October 31, 2022, 05:52:57 AM Thanks for your sharing, I have seen an article about socket connect failed in zeusbtc, but it said "The troubleshooting step is applicable to A3, B3, D3, L3+, L3++, fixed frequency S9, V9, X3, Z9, Z9 mini", But these methods seem to work on the S17 pro as well.
Title: Re: S17 PRO - not hashing!? Post by: BitMaxz on October 31, 2022, 09:23:17 PM Thanks for your sharing, I have seen an article about socket connect failed in zeusbtc, but it said "The troubleshooting step is applicable to A3, B3, D3, L3+, L3++, fixed frequency S9, V9, X3, Z9, Z9 mini", But these methods seem to work on the S17 pro as well. Actually it works in all of the Bitmain units not just on selected units I experienced this many times when setting up the pool config misspellings/extra spaces are a common issue.Maybe Zeusbtc posted it long time ago when no s17 pro units yet but it should be still work to all Bitmain units not just s17 pro. |