|
Title: Antminer T17 Hashboard Repair - LDO registers incorrectly. Post by: patoshi on November 18, 2022, 07:33:41 PM I'm working on a Antminer T17 and this was a verified working board, but for whatever reason it stopped working. Using a STASIC hashboard tester, I isolated the issue to the first domain region. The LDO is measuring 3.2v, but should be 1.8. The other domains are measuring 1.8, but I'm unsure what's the cause of it because this is the FIRST domain and what comes before this? Pics below:
https://img001.prntscr.com/file/img001/hddd4BSpRJiYl8sK-fGWEw.png https://prnt.sc/rmzqDEcmiOUs Title: Re: Antminer T17 Hashboard Repair - LDO registers incorrectly. Post by: BitMaxz on November 18, 2022, 11:04:09 PM If it's a 3.2v I believe the test point you are checking is the LDO power supply that's the normal value. Also, check its resistance if it's shorted or has abnormal resistance.
If I were you don't go directly to hardware better start to diagnose the issue through the miner's logs and it might be just a PIC program issue. Replacing it with working PIC file should fix this issue you can get the PIC file from other known working hashboard. Title: Re: Antminer T17 Hashboard Repair - LDO registers incorrectly. Post by: patoshi on November 21, 2022, 09:33:20 AM If it's a 3.2v I believe the test point you are checking is the LDO power supply that's the normal value. Also, check its resistance if it's shorted or has abnormal resistance. If I were you don't go directly to hardware better start to diagnose the issue through the miner's logs and it might be just a PIC program issue. Replacing it with working PIC file should fix this issue you can get the PIC file from other known working hashboard. The LDO is not normal value of 3.2v, it should be 1.8v as the other LDO's are reading 1.8v and I have another working hashboard to compare to. Which is also 1.8v. You can't goto the miner logs, if the boards reads: 0 ASICs found! Thanks for you help anyways. Title: Re: Antminer T17 Hashboard Repair - LDO registers incorrectly. Post by: BitMaxz on November 22, 2022, 01:34:03 PM The LDO is not normal value of 3.2v, it should be 1.8v as the other LDO's are reading 1.8v and I have another working hashboard to compare to. Which is also 1.8v. You can't goto the miner logs, if the boards reads: 0 ASICs found! Thanks for you help anyways. Why not share the kernel logs here so that we know what exactly your miner's issue is? Or try to follow the guide from zeusBTC on how to check them if its abnormal voltage value or not. Here's the link https://www.zeusbtc.com/manuals/Antminer-T17-Hash-Board-Repair-Guide.asp Title: Re: Antminer T17 Hashboard Repair - LDO registers incorrectly. Post by: Rodemi on November 29, 2022, 03:08:29 AM Is the domain voltage for this domain 1.7V? Have you re-tinned and soldered the LDO?
|
