Bitcoin Forum

Bitcoin => Hardware => Topic started by: MXG125 on January 03, 2023, 02:27:38 AM



Title: Bitcoin merch Mars lander
Post by: MXG125 on January 03, 2023, 02:27:38 AM
hi there. just wondering if anyone has ever run a mars lander unit from bitcoin merch.com and used that as the primary ras pi set up and connected an external hub with additional conmpact f's and had success?


Title: Re: Bitcoin merch Mars lander
Post by: Stavroski on January 04, 2023, 07:09:01 PM
You can do this, as long as the hub is capable of supplying at least 2.1a or so per port. Do not plug extra sticks into the USB ports on the Mars Lander itself as the USB card in the device cant provide enough power.

HTH

Stav


Title: Re: Bitcoin merch Mars lander
Post by: MXG125 on January 04, 2023, 08:29:19 PM
i have a hub that is rated for 2.1 amps and currently connected 3 compac fs im not nearly getting the performance i should out of these. mostly in the 500-699ghz tops. any thoughts ?  thank you for your response.


Title: Re: Bitcoin merch Mars lander
Post by: Sledge0001 on January 04, 2023, 09:31:17 PM
To really get the most out of the Compac F's you need to drive them with 3.4A+ :)

Your USB hub is not supplying enough juice!


Title: Re: Bitcoin merch Mars lander
Post by: NotFuzzyWarm on January 04, 2023, 11:31:35 PM
i have a hub that is rated for 2.1 amps and currently connected 3 compac fs im not nearly getting the performance i should out of these. mostly in the 500-699ghz tops. any thoughts ?  thank you for your response.
Um, the Compac-F has their own thread (https://bitcointalk.org/index.php?topic=5355470.0) that you may want to read through. Bet most if not all of any questions you have - including power requirements and current pulled vs freq - are answered there...


Title: Re: Bitcoin merch Mars lander
Post by: MXG125 on January 06, 2023, 07:05:51 PM
To really get the most out of the Compac F's you need to drive them with 3.4A+ :)

Your USB hub is not supplying enough juice!

yea so i now have them connected to the gekko science hub i think thats the best one out there no?


Title: Re: Bitcoin merch Mars lander
Post by: Sledge0001 on January 07, 2023, 09:51:56 PM
To really get the most out of the Compac F's you need to drive them with 3.4A+ :)

Your USB hub is not supplying enough juice!

yea so i now have them connected to the gekko science hub i think thats the best one out there no?

Absolutely. Nothing comes close in my opinion.


Title: Re: Bitcoin merch Mars lander
Post by: writebhback on February 29, 2024, 01:54:59 PM
I have two of these and connected one to a hub (bitcoin merch hub), it would mine full strength for hours or days and then eventually stop hashing altogether. So I just run my hub from my computer now. Sad.

I would like to know if someone can tell me if there is a way to turn off the raspberry pi display screen at night. These are in my bedroom and my wife doesn't like the light  :-\


Title: Re: Bitcoin merch Mars lander
Post by: IAmGPIO on March 02, 2024, 10:51:17 PM
I have two of these and connected one to a hub (bitcoin merch hub), it would mine full strength for hours or days and then eventually stop hashing altogether. So I just run my hub from my computer now. Sad.

I would like to know if someone can tell me if there is a way to turn off the raspberry pi display screen at night. These are in my bedroom and my wife doesn't like the light  :-\

There isn't a.way to turn the screen off without logging in to the unit via ssh (username "pi", password "raspberry" and closing the process that runs the screen.

You can access this by typing "sudo screen -list" and attaching to the correct process running the screen program.

If this is a little too much for you, ask Idan at Bitcoin Merch to get a screen toggle / brightness slider implemented into the software and it'll get done.

Regards
IAmGpio



Title: Re: Bitcoin merch Mars lander
Post by: writebhback on March 04, 2024, 08:14:18 PM

If this is a little too much for you, ask Idan at Bitcoin Merch to get a screen toggle / brightness slider implemented into the software and it'll get done.


Great idea. Thanks!