Bitcoin Forum

Bitcoin => Mining support => Topic started by: Beny44 on February 10, 2024, 07:20:21 AM


Title: Phase sequence wiring on S19 Hydro
Post by: Beny44 on February 10, 2024, 07:20:21 AM
As I wrote in an adjacent thread I'm having problems with chain drops on the PSU. Temperature is out of the question, that's not it. Internet should be fine as well. Last idea is the power supply. There could be a voltage drop in the mains if it is necessary to follow the phase sequence, as with an electric motor?
Tnx

Code:
2024-02-07 08:23:09 30m avg rate is 185605.11 in 30 mins
2024-02-07 08:53:15 30m avg rate is 185564.06 in 30 mins
2024-02-07 09:23:20 30m avg rate is 186006.91 in 30 mins

2024-02-07 09:33:02 chain avg vol drop to 0.95
2024-02-07 09:33:14 chain avg vol rise to 20.68
2024-02-07 09:33:21 entrance_temp = 33, work_vol = 2040, curr_vol = 2040, ->tgt_volt = 2050

Title: Re: Phase sequence wiring on S19 Hydro
Post by: BitMaxz on February 10, 2024, 02:07:38 PM
You already have a thread here https://bitcointalk.org/index.php?topic=5484547.0 you should check my suggestion first in your thread.


Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines