Title: What does this error mean
Post by: Kasposhi on March 28, 2025, 09:45:42 PM
Just setup the KS3 Antminer and its overheating and shutting down within 2 minutes, hoping someone could give some insight into this error message: ===========================================Miner log===========================================
time="2025-03-28 10:57:39" level=error pid=1372 msg="invalid URL -- ''"
time="2025-03-28 10:57:39" level=error pid=1372 msg="invalid URL -- ''"
time="2025-03-28 10:57:39" level=error pid=1372 msg="invalid URL -- ''"
time="2025-03-28 10:57:39" level=notice pid=1372 msg="opt_algo 11, kas_2380"
time="2025-03-28 10:57:39" level=notice pid=1372 msg="Miner compile time: Tue Apr 9 16:43:13 CST 2024 type: Antminer KS3"
time="2025-03-28 10:57:39" level=error pid=1372 msg="No valid pools, please configure them first!"
time="2025-03-28 10:57:39" level=notice pid=1372 msg=platform_topol_init
time="2025-03-28 10:57:39" level=notice pid=1372 msg="Start api function"
time="2025-03-28 10:57:39" level=notice pid=1372 msg=check_machine_info
time="2025-03-28 10:57:39" level=warn pid=1372 msg="port 427 already exported"
time="2025-03-28 10:57:39" level=warn pid=1372 msg="port 429 already exported"
time="2025-03-28 10:57:39" level=warn pid=1372 msg="port 431 already exported"
time="2025-03-28 10:57:39" level=warn pid=1372 msg="port 433 already exported"
time="2025-03-28 10:57:39" level=warn pid=1372 msg="no board pluged in socket 432"
time="2025-03-28 10:57:39" level=warn pid=1372 msg="port 426 already exported"
time="2025-03-28 10:57:39" level=warn pid=1372 msg="port 428 already exported"
time="2025-03-28 10:57:39" level=warn pid=1372 msg="port 430 already exported"
time="2025-03-28 10:57:39" level=warn pid=1372 msg="port 432 already exported"
time="2025-03-28 10:57:39" level=notice pid=1372 msg="chain_offset 0, chain 0"
time="2025-03-28 10:57:39" level=notice pid=1372 msg="chain_offset 1, chain 1"
time="2025-03-28 10:57:39" level=notice pid=1372 msg="chain_offset 2, chain 2"
time="2025-03-28 10:57:39" level=notice pid=1372 msg="reset fpga"
time="2025-03-28 10:57:39" level=notice pid=1372 msg="Begain check_fan_valiad"
time="2025-03-28 10:57:40" level=notice pid=1372 msg="check_fan_speed ok, fan_num = 4"
time="2025-03-28 10:57:40" level=notice pid=1372 msg="eeprom add device: 0"
time="2025-03-28 10:57:40" level=notice pid=1372 msg="eeprom add device: 1"
time="2025-03-28 10:57:40" level=notice pid=1372 msg="eeprom add device: 2"
time="2025-03-28 10:57:52" level=notice pid=1372 msg="start the http thread."
time="2025-03-28 10:57:52" level=notice pid=1372 msg="start listen on 6060 ..."
time="2025-03-28 10:57:52" level=notice pid=1372 msg="httpListenThread start ret=0"
time="2025-03-28 10:57:52" level=error pid=1372 msg="Sweep error string = N:4"
time="2025-03-28 10:57:52" level=error pid=1372 msg="No servers were found that could be used to get work from."
time="2025-03-28 10:57:52" level=error pid=1372 msg="Please check the details from the list below of the servers you have input."
time="2025-03-28 10:57:52" level=error pid=1372 msg="Most likely you have input the wrong URL, forgotten to add a port, have not set up workers, or the network was disconnected."
time="2025-03-28 10:57:52" level=warn pid=1372 msg="Pool: 0 URL: User: Password: "
time="2025-03-28 10:57:52" level=warn pid=1372 msg="Pool: 1 URL: User: Password: "
time="2025-03-28 10:57:52" level=warn pid=1372 msg="Pool: 2 URL: User: Password: "
time="2025-03-28 10:57:52" level=error pid=1372 msg="No servers could be used!"
time="2025-03-28 10:59:02" level=warn pid=1372 msg="Pool is activing."
time="2025-03-28 10:59:02" level=notice pid=1372 msg="all backend runtimes have been poweroff."
time="2025-03-28 10:59:02" level=notice pid=1372 msg="set_miner_start_time total_tv_start_sys=123 total_tv_end_sys=124"
time="2025-03-28 10:59:08" level=notice pid=1372 msg="Initializing the power, please wait, this may take up 1 minute..."
time="2025-03-28 11:00:13" level=notice pid=1372 msg="bitmain power fw version: 0019"
time="2025-03-28 11:00:19" level=notice pid=1372 msg=start_heartbeat_thread
time="2025-03-28 11:00:20" level=notice pid=1372 msg="enable power watchdog: 0x0001"
time="2025-03-28 11:00:21" level=notice pid=1372 chain=0 msg="ChipSetting_get_addr_KAS_2380 detect 92 chips"
time="2025-03-28 11:00:21" level=notice pid=1372 chain=0 msg="top_init_kas start"
time="2025-03-28 11:00:23" level=notice pid=1372 chain=0 msg="ChipSetting_get_addr_KAS_2380 detect 92 chips"
time="2025-03-28 11:00:25" level=notice pid=1372 chain=1 msg="ChipSetting_get_addr_KAS_2380 detect 92 chips"
time="2025-03-28 11:00:25" level=notice pid=1372 chain=1 msg="top_init_kas start"
time="2025-03-28 11:00:27" level=notice pid=1372 chain=1 msg="ChipSetting_get_addr_KAS_2380 detect 92 chips"
time="2025-03-28 11:00:30" level=notice pid=1372 chain=2 msg="ChipSetting_get_addr_KAS_2380 detect 92 chips"
time="2025-03-28 11:00:30" level=notice pid=1372 chain=2 msg="top_init_kas start"
time="2025-03-28 11:00:32" level=notice pid=1372 chain=2 msg="ChipSetting_get_addr_KAS_2380 detect 92 chips"
time="2025-03-28 11:00:34" level=notice pid=1372 msg="check bringup temperature 40 C"
time="2025-03-28 11:00:34" level=notice pid=1372 msg="Initializing chip cluster, please wait, this may take up to 2 minutes..."
time="2025-03-28 11:01:40" level=notice pid=1372 msg="set PT2_freq to 675.00, current voltage 1700"
time="2025-03-28 11:01:50" level=notice pid=1372 msg="set_miner_start_time total_tv_start_sys=291 total_tv_end_sys=292"
time="2025-03-28 11:01:55" level=notice pid=1372 msg=start_voltage_monitor
time="2025-03-28 11:01:55" level=notice pid=1372 msg="start freq_compensate_thread"
time="2025-03-28 11:02:40" level=warn pid=1372 chain=0 msg="Chip temperature is too high, enable protection. Bias freq:-10.00"
time="2025-03-28 11:02:41" level=warn pid=1372 chain=1 msg="Chip temperature is too high, enable protection. Bias freq:-10.00"
time="2025-03-28 11:02:42" level=warn pid=1372 chain=2 msg="Chip temperature is too high, enable protection. Bias freq:-10.00"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:51" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:02:52" level=warn pid=1372 poolno=0 msg="reject reason: duplicate"
time="2025-03-28 11:03:42" level=fatal pid=1372 chain=2 msg="high temp exceed limit (3), max_chip_temp = 93, max_pcb_temp = 78!"
time="2025-03-28 11:03:42" level=error pid=1372 msg="Sweep error string = P:1."
time="2025-03-28 11:03:43" level=error pid=1372 chain=2 error="temp too high" msg=check_temp
time="2025-03-28 11:03:43" level=error pid=1372 msg="Sweep error string = P:1"
time="2025-03-28 11:03:43" level=fatal pid=1372 chain=2 msg="high temp exceed limit (4), max_chip_temp = 93, max_pcb_temp = 78!"
time="2025-03-28 11:03:43" level=error pid=1372 msg="Sweep error string = P:1."
time="2025-03-28 11:03:44" level=fatal pid=1372 chain=2 msg="high temp exceed limit (5), max_chip_temp = 93, max_pcb_temp = 78!"
time="2025-03-28 11:03:44" level=error pid=1372 msg="Sweep error string = P:1."
time="2025-03-28 11:03:45" level=fatal pid=1372 chain=2 msg="high temp exceed limit (6), max_chip_temp = 93, max_pcb_temp = 78!"
time="2025-03-28 11:03:45" level=error pid=1372 msg="Sweep error string = P:1."
time="2025-03-28 11:03:46" level=fatal pid=1372 chain=2 msg="high temp exceed limit (7), max_chip_temp = 94, max_pcb_temp = 79!"
time="2025-03-28 11:03:46" level=error pid=1372 msg="Sweep error string = P:1."
time="2025-03-28 11:03:47" level=fatal pid=1372 chain=2 msg="high temp exceed limit (8), max_chip_temp = 94, max_pcb_temp = 79!"
time="2025-03-28 11:03:47" level=error pid=1372 msg="Sweep error string = P:1."
time="2025-03-28 11:03:48" level=fatal pid=1372 chain=2 msg="high temp exceed limit (9), max_chip_temp = 94, max_pcb_temp = 79!"
time="2025-03-28 11:03:48" level=error pid=1372 msg="Sweep error string = P:1."
time="2025-03-28 11:03:49" level=fatal pid=1372 chain=2 msg="high temp exceed limit (10), max_chip_temp = 94, max_pcb_temp = 79!"
time="2025-03-28 11:03:49" level=error pid=1372 msg="Sweep error string = P:1."
time="2025-03-28 11:03:50" level=fatal pid=1372 poweroff=true msg="high temp 1 low temp 0 fan err 0 read no temp 0, uneffective temp 0, lost connection too long 0"
Would a faulty PSU cause these kind of errors?
Title: Re: What does this error mean
Post by: miner29 on March 29, 2025, 01:47:15 PM
First line says URL is invalid.
Check your url as you dont appear to be connecting to a pool
Title: Re: What does this error mean
Post by: JayDDee on March 29, 2025, 08:53:57 PM
I think the answer is in the question. It's overheating, deal with that. Make sure the fans are all working & clean
& you have good air flow. ASICs are designed for data centres that have environmental control so you might
need more cooling.
Title: Re: What does this error mean
Post by: Kasposhi on March 31, 2025, 02:34:48 AM
First line says URL is invalid.
Check your url as you dont appear to be connecting to a pool
Eventually it connects to pool and once the hasboards start hashing, the temperature increases, excessively infact. I think the answer is in the question. It's overheating, deal with that. Make sure the fans are all working & clean
& you have good air flow. ASICs are designed for data centres that have environmental control so you might
need more cooling.
I think you're right, its 4 miners in a small room, with little air flow. Was just wondering if there was some hardware failure. Thanks, I shall address the cooling situation.
Title: Re: What does this error mean
Post by: Ers900 on April 29, 2025, 10:03:25 PM
Did you manage to find a solution?
I’m in a similar dilemma!
|