Bitcoin Forum

Hi,

Welcome to my trust thread for  LeaseRig.net lessors can comment here.

My RIG name are Skynet_1, Skynet_2 currently running at 1.3 Mh/s each, monitored and maintaned by me 24/7.

Rent my rig with a great starting low price! 8)

will send 0.05 BTC for the deposit in a couple of days :)

Hope to have a great business with you guys!

Holding a deposit of 66,000 DOGE

Happy Leasing.

Hi All,

Rigs are now up and running!

Ready for leasing at a very competitive price

Please post your feedback on this thread whether good/bad!  ;)

For emergency issues that requires immediate attention please reach me through skype: timoyskie - online 24/7  ;D

Happy leasing!

Hi,

I dont know when your rig stop. But it is currently off

Ive noticed it was still hashing but shows currently off in leaserig. Please just do check maybe you have a hardware problem.

hardware/rig is running fine. iam unable to connect to leaserig.net sorry for the inconveniece will compensate this issue as soon as possible

hi there SKYNET_2 seems to be dead?

ive rented this user's rig for only 2 hours and it went perfect, without any trouble. The communication with this user was fast too and useful. Recommended!

hi,
please check and refresh page of your pool status in leaserig.net if alive and accepting shares, check your pool settings. check your dashboard for hashrates.

i have checked the rig is working fine and accepting shares kindly check on your end

Hi Sieshin,

Yes it is dead due to wrong pool configurations.

Kindly check your user name and password settings for pools config. As error pertains to failed pool authentication. Make sure you are registered in that pool. Input in leaserig pool settings your "USERNAME.workername" and password.

 If this is a P2Pool kindly switch to non P2Pool. will extend lease hours once this has been resolved.

 Sorry for the late support, been drunk and wasted these past few days hehe.

Thank you for the Feedback :)

Always here to serve @timoyskie :D

Skynet_2 is now hashing

Paid for 48 hours yesterday but both skynet rigs are gone from account dashboard and available for someone, why?

http://extremepcbuilders.com/misc/skynet_hist.PNG

It is possible that the rigs went down and the lease auto cancelled.  You would see a refund transaction if that happened.

Ok yes i do see refund. Thank you for reply. Anyway to see chart after lease is up or have it emailed?

Skynet_2 (Scrypt 1.20 MH/s)

Error: Mining rig is not responding!

Hi

I hired your rig for two hours at 0.0036btc.
It only ran a short while and now stopped...
What happened?
Do I get a refund?

Again Skynet picked up my order on both rigs and both went down within 24 minutes in on a 72hr lease. One was refunded right away (less the fee) and the other appeared to reboot and continue on. The rig that went down right away picked up my order yet again a couple hours later and is cancelled yet again.

Either these rigs are very unstable or the rig is cherry picking orders and cancelling when something better comes along. This is definitely bad for renters as we are paying a fee to each time an order is picked up regardless whether seller follows through with the time allotment or not. Fee bombed because of seller is not in my interest. Wish there was a block available to exclude specific sellers when placing open orders.

At this time i recommend avoiding either of the skynet 1 or skynet 2 rigs. Nothing you can do when the rigs pick up your open order though.  :(

Both skynet_1 and skynet_2 is underperforming.

Should be 1.2 MH but do around 0.8 and 0.9 most of time.

Avoid these rigs. unfortunately, this was order picking so I had little influence.

Could you submit that as a ticket to the helpdesk so we can take a look at implementing it?

EDIT: if the rig goes down after 20-30 minutes you should effectively receive that time for free yes?

Hi everyone,

i had serious problems this last two days.

When the maintenance of Leaserig.net happened Skynet_1 and Skynet_2 are now hashing below 1mhash and automatically disconnects to LRP then leases were dropping and rigs were auto disabling.

i always get speed buffer filled error. Miaviator please help, my rigs were working just fine before the leaserig maintenance though.

will try to upgrade my ISP plan as soon as possible hope that would help.

rigs became very unstable after the leaserig.net maintenance.. still looking to all of the possibilities of why my rigs under performs.

i have no capability of cancelling orders. i just receive notifications that rig went down after hiring. we dont get paid if we dont hash for atleast an hour.

RIGS runs normal on my end.... please see screenshot below

Skynet_1

http://imagize[Suspicious link removed]ageshack.us/v2/xq90/838/3if9.jpg (https://imageshack.com/i/na3if9j)

Skynet_2

http://imagize[Suspicious link removed]ageshack.us/v2/xq90/835/20xk.jpg (https://imageshack.com/i/n720xkj)

Appreciate the response. I was going off the limited stats i have available to me on my end, hence why i posted. I rent a lot of rigs and haven't run into the dropped rig situation with another Leaser's rig before. I apologize for assuming the worse and i hope you get the stability issues figure. Thanks.

No problem, i understand your reactions. Doing my best to get this figured out. Well i was also frantic seeing the rigs get dropped and auto disabled without any of my control. been my first time encountering such issue too. I'm coordinating with Mia about this.  Thank you

P.S. i was out of town these past few days for holy week vacation. but i'm here now :)

Hi again, accidentally I hired your rig Skynet_1 (I didn't wnt after bad experience with you, but it happened)

My worst dream came true after one hour, when the rig disappeared. I can't see it in my active rigs

Please compensate.

24(-1409m)(C)

The provider is on local-payments.  When the rig went down the lease was cancelled and you were refunded including the leaserig fee.

thanks for explaining mia

ptr it seema that your pool is not advisable to my rigs due to my rig location.

I hired Skynet_2... worked fine for a couple hours but is now offline.  :'(

EDIT: It's up again.

kindly switch pool for skynet2

d@zcial.com

you are currently renting skynet1 . your pool seems to be dead please check account settings

iannick@bronick.com you are currently renting skynet1

please check your pool account as it shows dead status. kindly switch to east based pools for better hash and stability. thankyou

Hi! I'm renting your SKYNET_2 (SCRYPT 1.30 MH/S) rig. It's currently shwon as dead (I can't say for long because I don't check every 5minutes, but leaserig reports 0 since at least 10minutes by now) .
Your rig was a bit wonky but most times it was reporting a bit OVER the reported 1.30 mh!
So I hope you may extend my lease later, or we can work out a refund  or something. I won't be around this weekend sadly because I'm attending an event that I leave for in ~9hours. So I hope you have a nice weekend and resolve whatever the issue is :)
Cheers!

Renting SKYNET_2.

It's mining to your pool, I can't remove it. Then the rig went offline.

Please fix it.

Regards