Bitcoin Forum

FAKE SKYPE ID ALERT!!!

My Skype ID is "qiangminer" = "QIANGMINER" the one and only.
The Skype ID "qianqminer" = "QIANQMINER" is not mine. It's fake and scam!!!
http://a2.qpic.cn/psb?/V14YZN9x4UkdER/9cC1N*s.x0e1H2WkQeemCMcqiOi4U*otuswLrjLyKWo!/b/dD1c3OowDgAA&bo=WAJ8AQAAAAABAAA!&rf=viewer_4

Pls, be careful.



Hello, I am a sales agent of one of the ASIC miner factory based in Shenzhen China,
which has domestic sales more than 3,000 units of 1THs ASIC miner
since these third-gen miners have been released. The company that I work with
desires to increase volume output by exporting product and expanding its market coverage globally.
So, I want to offer the group buy deal for 1THs Coincraft A1 28nm ASIC miner as following details.
Moreover, I guarantee in every products as they are advertised and moderate price.
Any fake/false information is not allowed in my terms.

Features:

Hash rate: 1TH/s
Processor Chips: 32 * A1 28nm ASIC Chips
Modules: 4 module boards (250GH/s per board) +/- 20% tolerance.
Power supply: Included 1000 Watt Power Supply
Control Board: Raspberry PI with SD Card slot (ARM11 700MHz CPU, 512 MB RAM) and 8GB flash storage
Access: Web based interface via IP address (Linux 3.6.11 OS)
Network connection: Ethernet Cable
Cooling: Three x 12cm PWM fans and customized heat sink
Operating temperature: expected to be at 48°C ambient and should be able to test up to 35~40°C ambient
Stand alone: After configuring it, powerful stand-alone ASIC bitcoin miner
mines alone without a PC connection required

http://b398.photo.store.qq.com/psb?/V14YZN9x00weLz/LES5lE*bNBJyqCngVNNaIdnMrW.NJmhCn3Hy11qs1M0!/b/dCYwQO3bKgAA&bo=gAJVAwAAAAABAPM!

http://b394.photo.store.qq.com/psb?/V14YZN9x00weLz/mcEn36HGHzLvIt0tpNo9MkkWRpQdVbX85V0somDSdWI!/b/dK8H5.qwAwAA&bo=gAJVAwAAAAABAPM!


Note* no LCD monitor, we’re not Dragon miner.

Package :
Package Size: 565mm x 565mm x 280mm
Product Size: 505mm x 435mm x 160mm
Total weight: 17kg

Price and Payment options:
Price included shipping cost.  Buyers pay additional costs such as import duties, taxes,
and customs clearance fees which excluded in the total price.
Payments accepted bank transfer, western union, bitcoin and paypal
with customers pay a transaction fee. No escrow.  (Further details send via PM or Email)

Price Quotation:

$2,650 usd each

 
Note*  For business or buy more than 100 machines, please email: qiangminer@gmail.com)
 

Note** Paypal payment are subject to a commission charged by paypal , a fee that actually  is buyer's responsibility.

Note*** I can accept the bitcoin payment, but my quotation price is based on Coinbase exchange rates
and only valid within 24 hours (I will update everyday passed).
Please contact before transfer bitcoin to get current price for the product first.

Payment process:
You can transfer money or pay bitcoin and attach the transaction details via PM and email: qiangminer@gmail.com.
Then give me your information, such as, quantity, BTC address, paid amount, BTC transaction ID,
bank transfer evidence, receiver name, address, zip code, and telephone.
 I will reply you a confirm letter ASAP, track your order on this topic.

Shipment Date:
Miners are ready to ship. Orders are shipped on the following business day after confirmation of payment.
This is a first come first serve group buy, thus, if the manufacturer has product in stock, orders will ship immediately and respectively.

Worldwide shipping:
I support international shipping by EMS, DHL, UPS, FEDEX, TNT.
1: Only accept EMS for goods sending to Russian Federation and strongly recommend DHL for other counties.
2: Please make sure your shipping address and phone number is correct.
3: The insurance cost is not included, when you think it is necessary, let me know.
4: The casing maybe has some scratches and dents from importing/shipping but all are cosmetic.

Service:
1: This is an all-in-one solution, just plug in power and network cable, you can easily config via web interface.
2: Device will be tested to prevent DOA before shipping it to you, and my team provides post-sale technical support.
3: My team will help setting up the device for mining if required via Email.
4: I offer 3 month warranty except artificial damage. (customer is responsible for shipping cost)
5: I can conclude an agreement in form convenient for you;
6: If you want, I can enter into a contract of sale. We can print it, write identity data and signature.

Buyer must know:
1: There is limited repair service, because this miner machine can print money, repair work will take long time.
2: The company can change a new one within 48 hours after you receiving the shipment if you can approve this machine has problem.
3: Please confirm the shipment after you receiving the goods within 24 hours.
4: Returns accepted if product not as described, buyer pays return shipping, or keep the product & agree refund with seller
5: Do not overclock it, we won't take responsibility for overclocking.

Contact:
Name: Nattapon Sriapiraksakun
Email: qiangminer@gmail.com
Skype: qiangminer
Telephone: +8613166237639
QQ number: 2198397675
Bitcoin Address: 19b3U51QG9YPXbDVcvNFvUsiMrDSNv3SkP
Link for more pictures:

Pls click http://user.qzone.qq.com/2198397675/photo/V14YZN9x00weLz

http://user.qzone.qq.com/2198397675/main

Who am I?
I am a responsible and trustworthy Thai guy who studied bachelor’s degree in Shanghai China
and have been working as a sales agent and interpreter here for over 6 years without leaving.
(I can provide proof documents you want.) I ,thus ,have experience in marketing and dealing with many factories.
Last but not least, I value a long-term business, trust reputation, and my customers
as I want to achieve my own business not to invest in bitcoin by scam.  

Regards,
Nattapon


----------------------------------------------------------------------------


Buyers' status update

1. jleefly / 1 unit /via paypal / Product received
2. Xian01 / 1 unit /via paypal / Product received
3. end18 / 1 unit /via BTC / Product received
4.Chris / 1 unit / via paypal / Product received

Can you take Escrow like Ognasty

Sorry, I have no service on Escrow, paypal pls  :)

In the pictures, it appears that each hashing module has a ribbon connection and 1x 8pin power input. I was wondering if all the modules require 8 pin connections, or will 6pin work?

I am curious since the picture appears to use 8pin on one or two modules and 6pin (without the 2 extra pins available) connectors for the other modules. The description also says "3 +12V DC input" for power; is this accurate?

Further, the PSU supplied is 1k W and the A1 is clocked for 1TH. Does this imply that the efficiency is better than 1G/W, as there is usually some extra power being used (to run control board for example)?

Finally, if one puts a more powerful PSU in, what are the options for overclocking/underclocking? Does the manufacturer put in a kill switch when one tries to OC/UC, or is it an easy task of changing clock settings and cooling the device properly? If you can OC or UC it, do you know to what value and what the power consumption is?

Why does it cost more to buy more than 5 units?

Another scam....there will never be any deliveries of any working miners from this.

pretty sure that is the way around to gain trust... sell the first 5 to people cheaper so they can report back when they get it and everything is groovy

I'll take one escrowed for $2800, or I'll offer to pay you BTC upon delivery of product, shipping to the USA, if you are looking for members to verify this product.

I sent email to you.

You are in SZ

Can I send my friend in SZ to collect the goods and pay on collection?

Thank you for your consideration and good questions.
As I answer you in QQ, I do answer again here for others.

All the modules is 6 pin connections, the one u see as 8 pin,
actually another 2 pin are not connected. Connectors from PSU to power are about 25 pin.

In addition, our item is not overclock from the factory. One a1 chip's speed is 20-35 GH.
We set its speed at 32GH. So it made 1024 GH/machine. We don’t neither overclock nor underclock our item.
And definitely, we do not recommend you to overclock or underclock device.

If you want to overclock, we can make unit unlocks from the manufacturer for you in special case,
but the warranty would be canceled. By the way, the PSU may not enough to support the overclock,
so you have to change the PSU by yourself. The miner's power consumption is now 950watt
and the factory plans that the PSU may be changed from 1k Watt to 1100-1200W.

Finally, we do not sell products without PSU for lower price
because we have to test all miners for setting and running them before shipment.

Dear, gallery2000

Sorry for my poor English that made you feel confused.
I've edited this issue already "The First 5 units for sample and review : $2,800 usd each"

Thanks miter_myles for your kindly comment.

Please be patient. Give me a chance and a little time to prove myself.
Besides, if customers want to visit our manufactory , I appreciate and very welcome.

Of course, we can meet at North Huoqiang, Saige Plaza.
What's the time and date that your friend available?
I will contact you via PM for more details.

Thanks
 

Thank you for your offer.
I am replying your request via PM :)

Thank you and please kindly check your email.
Right now I have replied back to all emails and PM already.

paypal to qiangminer@gmail.com ?

 Have a thread going with Qiangminer via email, inquiring about purchasing a first run of these.

 I'm wondering if the WebGUI is in Chinese or English; I don't understand Chinese :(

 Hoping to do a deal via Paypal/USD.

ํYes sir

Hello,

I will provide an English manual for you and our clients since the WebGUI is in Chinese.
Don't worry about the language, I have many connection with English translators
My teams and I will give you a technical support enthusiastically.

Hope to deal with you too
Regards,

Sent payment by paypal. Will update the progress on my sample order for everyone.

I have received your both paypal payments already
and will update your miner status via this thread.

Thank you very much

Hi, I sent BTC to you.  :)

Should be able to use Google translate on the web UI

Right now I'm trying to follow your track at the logistics office.
I will update to you so so soon when I get it.

I apologize for your inconvenience

Tracking number received :) And now we wait...

Hey this is not cheaper than dragon, and has no LCD.

Im happy with LKETC , why should I choose you?

 How do you figure ? I've seen hosting deals for $2600, but could you direct me to a cheaper source for physical 1tH/s rigs ?

Sent you a PM!

You mean you you bought it for $2600?

Dragon is $3000.

It says $2,950 for group buy of 6 miners minimum?

I can buy a single directly from LKETC for the same price.

No, I mean $2,950 for 1 unit
but when I gather orders from every customers reaching 51+ units
the price will reduce to $2,900

Sorry for my poor English to make you confuse.

Dear, our customers

I'm going to answer every questions which are in this post, PM or Email.
Please kindly wait and be patience. Thank you very much. :)

Best regards
Nattapon

Yes, and I ask you again, what is your advantage compared to LKETC?

You dont have a better price, neither an LCD display, nor reputation, nor a website.

Question again, why should I buy from you?

 Considering 1tH/s rigs just became available for $2500 from competitors, shipping out tomorrow, I can see your point. However, lacking a LCD is not a deal-breaker as I'm mostly monitoring these via web interface anyway.

 Still waiting on some movement of my DHL tracking number, and can only hope the lack of movement is due to it being Sunday.

Can you please specify " Considering 1tH/s rigs just became available for $2500 from competitors,"  ??

Who are they?

https://bitcointalk.org/index.php?topic=409701.0

i see an advantage here: Paypal - lets you use your credit card

A few questions about the miner that I answer the customer:

- source code for cgminer modifications is available where?

We can’t provide you source code for cgminer modifications. For my opnion, others factories are the same.

- circuit schematics will be provided to customers? His is required for maintenance and/or repair

We can’t provide circuit schematics as a secret of our factory. In case, it’s need to repair, pls send its back to us.

- what is required to 'unlock' a miner to allow overclocking?

For A1 chip, it is locked from the factory and highly recommended to do not unlock.
We had pretested and tried out in every ways and found out this miner is very stable
at 1TH with our spec of material. If you want to unlock for overclock, we recommend
to use AVALON GEN3 chip which is designed for overclock miner.
However, our factory still do not release the AVALON GEN3 miner, sorry about that.

- with several manufacturers producing these clones why should I choose qiang?
Web GUI is in Chinese, unproven, no LCD screen, 1kw PSU only (lketc dragons are now shipped with 1.2kw PSU)
and price is essentially the same.

We are 100% brand new and first hand product. We don’t mine with them waiting for customers come to pick them up.
We can provide a translation of Web GUI for our customers.
No LCD to reduce a cost because LCD don’t help to mine BTC ,just show stat.

For PSU, the factory has changed them to 1300kw PSU within box of 1100kw PSU,
because these PSU spec we special order from a PSU factory,
but they don’t have 1,300 kw box for a while. However you can prove by open the box or use meter.


For the price, we try to lower its as much as we can. We guarantee our good quality, good after sale service,
good material with reasonable price. We extremely cannot reduce price anymore.
It’s up to the customers to choose what product and service are suitable for them.
The only thing we can say is we really try our best.


Best regards
Qiangminer

Thanks for the link, hadn't seen that.

We really can't sell at $2,500, we apologize about that. However, we can ship out on the next day after we confirm payment as well.
If we reach the gathering order of 51+ miners after group buy closing date. we will refund $50 back.


To.. Xian01

I think DHL should update your miner movement today too,
because I send it by the fastest express service of DHL (with high charge to me so).
From my export experience, sometimes DHL HK warehouse was overloaded with parcel posts so it maybe lil late.
I will pursue your express situation from my logistics service this morning and update you soon.

 I can't say that I support this stance. IMO, if you can't publish your changes to cgminer, then you should not be using cgminer to begin with. It's against the agreement included with the CGMiner source code.

 It's poor form and disrespectful to the hard work done by the authors of the software.

But what is the reason for having it locked?

Doesn't it make it suspicious?

Sorry that I don't have enough power to push the factory sharing the source code. :-[
I'm only a sales agent not the factory owner and the owner he doesn't care about share this modification
and spread them online. and I think another provider do same things like me.
Could anyone show up about dragon miner or other asic factories who share?

I sent BTC to Qiangminer and got a DHL tacking number last Saturday.

He is very kind and sent my miner quickly.

But, my miner doesn't have pick-up message.

It just [Shipment information received] state.

It mean, he reserved DHL delivery and DHL didn't got package.

Qiangminer didn't reply to my mail from yesterday.

So, I can't get any update from Qiangminer and DHL.


If you consider this Group Buy, be careful.


I can see picked-up message in my tacking information. :-)

Well your boss sounds like a thieving asshole.

Here is a sample of how other companies (your companies competitors) distribute source code:
https://github.com/bitsyncom
https://github.com/KnCMiner/cgminer
https://github.com/AntMiner/AntGen1
https://github.com/luke-jr/BitForce_SC (note that even BFL has released source)
https://github.com/gridseed

I could go on, but hopefully you get the point.

Package arrived ! Will see how she performs later today when I get a chance to set it up. No documentation. This is going to be fun !

https://i.imgur.com/TUUcrcq.jpg
https://i.imgur.com/Rhl5sqI.jpg

EDIT: It's alive !

https://i.imgur.com/uPPS24O.png

Nice man!  Thanks for sharing!

Keep us posting, this is interesting!

You have to be the only person on earth that possesses all the versions of the A1 clone 1Terra miners!!!

 ;D ;D ;D



ps. I am trying to catch up with you but I am still waiting for my tracking number .   ::)

Thank you for sharing. I get it.
I will try to negotiate to the factory owner again.

Sorry for any inconvenience caused to you.
Right now, I've seen that your miner is at your country customs.
Hope to see a miner in your hand soon.

 

Thank you

Hopefully BTC goes up! I have 4.6 coins and would love one of these.

wink wink nudge nudge ... feel free to PM me  ;D

Some updates after 5 hours of uptime, mining difficulty 1024 shares.

https://i.imgur.com/nSjWJow.png

I should note that I had difficulty getting changes to the pool settings to stick via the webgui, so I had to ssh in and configure the pool information with nano /var/www/accout.txt then shutdown -r now to reboot

User/pass is root/admin for ssh on these guys. You should have a number written on your unit and on the SD card. That is the last quad of the 192.168.1.xxx address of the system.

For changing a pool address,  stop mining first via Webgui, then change a pool address and save. After that, start mining again.

Miner arrived yesterday. Shipping was kinda late but hash speed at 1TH so far. :)

http://postfiles2.naver.net/20140419_97/jleefly02_13978792997058snB9_JPEG/q.jpg?type=w2

http://postfiles12.naver.net/20140419_27/jleefly02_1397879300128NoPgJ_PNG/qiang_miner.png?type=w2

https://www.dropbox.com/sc/d3d5ge332khfwx0/OUzzxha09j (https://www.dropbox.com/sc/d3d5ge332khfwx0/OUzzxha09j)

Today, I received it too.

Thank you, Nattapon.

Thank you very much all you guys for sharing

Would it be possible to provide us a download link to a RasPi image we can use to restore our units in the event of an SD corruption ?

Yeah do *ANY* of these manufacturers provide a firmware image?  My SD card went toast (tried several machines) and I have no image to go from.

use this image for the miner
https://dl.dropboxusercontent.com/u/92967009/dragon_image.7z (https://dl.dropboxusercontent.com/u/92967009/dragon_image.7z)
use this program to insert image in sd
http://sourceforge.net/projects/win32diskimager/ (http://sourceforge.net/projects/win32diskimager/)

Thank you for your kindness

Hello Sir,

Are you working on a 3TH/s clone right now?

We both know what to look for, as we both been bitcointalked rip-off, by looks like "AvalonShenzhen" same page layout..Newbie
here some info and not good:

Buyers' status update

1. jleefly / 1 unit /via paypal / Product received, from Busan, Korea!!
2. Xian01 / 1 unit /via paypal / Product received 1 unit shipped.?
3. end18 / 1 unit /via BTC / Product received,   From South Korea!!
4.Chris / 1 unit / via paypal / Product received, User not exiting!!

So maybe he shipped one unit...and waiting for the big payoff.

Ognasty is from same place..Korea

Could big scam from Korea, by same person

I reserve the right to edit.
edit: https://bitcointalk.org/index.php?topic=424621.0
edit: https://bitcointalk.org/index.php?topic=467404.0
edit: The National Cyber Security Centre (NCSC) is responsible for overseeing digital security in the Netherlands

Mine is running right now actually.  Chris is my first name and you can guess what my last is LOL!

I'll post screen shots later and a pic of the unit hashing with my Dragon Miners (have 12 A1 clones right now).  But I booted it up, the the IP was justed as Xer0 had posted (192.168.1. the digits on front of the case), setup the network and added my pool information.  It's currently hashing at 1-1.02 TH/s for last 2 days.   

 What is specifically not good ? My Qiangminer is working quite well so far. Look forward to purchasing another in the near future.

Is Qianminer your?

What?

Anyone know if it's easy to do solo mining with these ones, I need one of these for mining others sha256 coins...

Qianminer is not mine.The correct and only one is Qiangminer

Another one that is trying to be you is Qangminer.  This is not you right?

Are these clones still in stock?  If so, are you still selling them for $2,650?  Good luck with that.

Not that good luck with such price.   ;D

I was being facetious. ;D

BTW, does anybody know the actual draw at the wall for these clones?  I don't think it was ever mentioned in the OP.

FWIW, the SD Card in my Qiangminer got fubar'd the other night. Loading the dragon image posted in this thread onto a new SD card got the system back up and running in short order. (Make sure you have an IP scanner to locate it's IP. If memory serves, I believe the image in this thread defaults to 192.168.1.163.)

Is it hashing at a full 1T?  What's your wattage at the wall?

If i am not mistaken it hashes at 1t with the dragons firmware.

 Don't have a Kill-A-Watt handy to measure power draw. It's performing as expected, at 1THs with the dragon image.

Thanks guys.

The mind boggles as to why they keep slapping those puny 1000W PSUs in these 1T boxes?

Now, if they could only update their price to a more competitive one...

Why dont you go with the S2?

Is it necessary to have 28nm?

What ever happened to Qiangminer ? No longer interested in selling units ?

It seems he has a better market in China.

Zoomhash has this listed as a 220v only unit. Is this correct or can I plug into a 110v outlet?

Excuse me this image work to A1 gid miner?
http://gawminers.com/products/1-1-th-s-a1-by-gridseed-1-month-of-free-zencloud-hosting-service-24-hour-activation-asic-bitcoin-miner