Title: Send button does nothing Post by: clowncoin on April 10, 2014, 04:46:42 PM I am running Armory 0.90-beta on OSX.
I am trying to send all my bitcoins from my Armory wallet. However, when I enter the desired address, and hit "MAX", the "Send" button gives no response. If I lower the total a bit and hit send I get a message complaining the the transaction fee of .0001 is too low and asking me to accept .0002. If I hit OK to accept nothing happens, including no change to .0002 in the transaction fee field. If I manually enter .0002 and try to send I still get no response. I am not trying to send more than my total balance including the new fee. If I click on "Wallet Properties" on the main window I am shown a few addresses with a total balance of about 1.22. However my balance in my wallet under "Available Wallets" shows as 7.47, which is how much I expect! I have opened a support ticket as well, but maybe someone here can help me faster. https://dl.dropboxusercontent.com/u/2925090/armorylog_20140410_1215.txt (https://dl.dropboxusercontent.com/u/2925090/armorylog_20140410_1215.txt) https://dl.dropboxusercontent.com/u/2925090/Screen%20Shot%202014-04-10%20at%2012.26.33%20PM.png (https://dl.dropboxusercontent.com/u/2925090/Screen%20Shot%202014-04-10%20at%2012.26.33%20PM.png) https://dl.dropboxusercontent.com/u/2925090/Screen%20Shot%202014-04-10%20at%2012.26.56%20PM.png (https://dl.dropboxusercontent.com/u/2925090/Screen%20Shot%202014-04-10%20at%2012.26.56%20PM.png) Title: Re: Send button does nothing Post by: doug_armory on April 10, 2014, 05:14:43 PM I am running Armory 0.90-beta on OSX. I am trying to send all my bitcoins from my Armory wallet. However, when I enter the desired address, and hit "MAX", the "Send" button gives no response. If I lower the total a bit and hit send I get a message complaining the the transaction fee of .0001 is too low and asking me to accept .0002. If I hit OK to accept nothing happens, including no change to .0002 in the transaction fee field. If I manually enter .0002 and try to send I still get no response. I am not trying to send more than my total balance including the new fee. If I click on "Wallet Properties" on the main window I am shown a few addresses with a total balance of about 1.22. However my balance in my wallet under "Available Wallets" shows as 7.47, which is how much I expect! I have opened a support ticket as well, but maybe someone here can help me faster. https://dl.dropboxusercontent.com/u/2925090/armorylog_20140410_1215.txt (https://dl.dropboxusercontent.com/u/2925090/armorylog_20140410_1215.txt) https://dl.dropboxusercontent.com/u/2925090/Screen%20Shot%202014-04-10%20at%2012.26.33%20PM.png (https://dl.dropboxusercontent.com/u/2925090/Screen%20Shot%202014-04-10%20at%2012.26.33%20PM.png) https://dl.dropboxusercontent.com/u/2925090/Screen%20Shot%202014-04-10%20at%2012.26.56%20PM.png (https://dl.dropboxusercontent.com/u/2925090/Screen%20Shot%202014-04-10%20at%2012.26.56%20PM.png) Hi. Have you tried v0.91, which came out a few days ago? We've made a lot of changes and made the code much more OSX-friendly. Title: Re: Send button does nothing Post by: clowncoin on April 10, 2014, 05:32:52 PM I think I am zeroing in on the problem.
The first thing I did was delete mempool.bin and relaunched Armory. Now the unconfirmed transaction has disappeared and my balance shows as 8.72228367, which I believe is correct after checking all my records. When I look under my wallet properties I now see a new address with a balance of 7 BTC. However, when I look up this address in the blockchain, it shows a final balance of 0! It was used to send a smaller transaction and 5.75 were sent back to a change address. When I look up the change address on blockchain.info it shows the correct balance. When I expand my change addresses under wallet properties in Armory I can see that I have this change address in my wallet. However the balance shows as 0 in Armory! What is going on? Where are my 5.75BTC that blockchain.info shows I should have in this address?? Title: Re: Send button does nothing Post by: doug_armory on April 10, 2014, 05:50:00 PM I think I am zeroing in on the problem. The first thing I did was delete mempool.bin and relaunched Armory. Now the unconfirmed transaction has disappeared and my balance shows as 8.72228367, which I believe is correct after checking all my records. When I look under my wallet properties I now see a new address with a balance of 7 BTC. However, when I look up this address in the blockchain, it shows a final balance of 0! It was used to send a smaller transaction and 5.75 were sent back to a change address. When I look up the change address on blockchain.info it shows the correct balance. When I expand my change addresses under wallet properties in Armory I can see that I have this change address in my wallet. However the balance shows as 0 in Armory! What is going on? Where are my 5.75BTC that blockchain.info shows I should have in this address?? Again, I highly recommend that you give v0.91 a try. v0.90 works but is somewhat unstable on OSX. v0.91 should be a more stable experience. It also has quite a few bug fixes that apply across all platforms. I believe some of them may have to do with what you're seeing. Title: Re: Send button does nothing Post by: CircusPeanut on April 10, 2014, 08:13:02 PM https://dl.dropboxusercontent.com/u/2925090/Screen%20Shot%202014-04-10%20at%2012.26.56%20PM.png (https://dl.dropboxusercontent.com/u/2925090/Screen%20Shot%202014-04-10%20at%2012.26.56%20PM.png) In this screen shot the change addresses are hidden. Uncheck "Hide Change" and see if the screen makes more sense. Title: Re: Send button does nothing Post by: clowncoin on April 10, 2014, 09:23:37 PM In this screen shot the change addresses are hidden. Uncheck "Hide Change" and see if the screen makes more sense. Yes I did that as I described in my second post. The Wallet Properties screen showed an address with 7 BTC that really has 0 on blockchain.info. According to blockchain.info I sent 1.25 BTC from this address and the remaining 5.7499 after fee was sent to a change address. This change address shows 5.7499 on blockchain.info as expected. When I expand my change addresses in Wallet Properties I see this change address, but it is listed as having 0 balance. I rescanned the blockchain with Bitcoin-Qt and rebuilt and rescanned databases with Armory. Then I tried to send my balance again as I originally intended, and Armory quit unexpectedly after I entered my password to unlock my wallet. I opened it again and it proceeded to rescan my entire transaction history from scratch even though it just completed this a few seconds ago. The Wallet Properties window then showed the correct balance in my change address. Then when I tried to send my transaction again it finally went through and the client did not crash. So I guess everything is solved for now (?) I will definitely upgrade to the new beta soon. |