|
Title: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: chungenhung on January 12, 2012, 07:46:29 PM For those that run large scale mining opeations what kind of setup do you use to make sure your miners are always on, and with minimal support needed if pool went offline? Right now, I am leaning towards WIn7 for my rigs.
I am having a hard time finding a mining software that works under Win7 with fail-over support. GuiMiner is popular, but it doesn't have fail-over support for phoenix miners. I like phoenix miner with phatk2 kernel. Diablo miner has fail-over support, but I am getting a bit lower hash rate than phoenix with phatk2. Also still trying to figure out how to assign each GPU a different username, so I can track each GPU on the web separately. Another method is to just run the miners from a batch file. Is there a way to create a batch file to launch the miner, and if it failed to connect, auto reconnect to another pool? What are your solutions in Linux and Win7? Thanks Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: Epoch on January 12, 2012, 07:49:12 PM following ...
Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: rjk on January 12, 2012, 07:50:00 PM Search "BAMT" on this forum.
Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: jamesg on January 12, 2012, 07:52:26 PM For those that run large scale mining opeations what kind of setup do you use to make sure your miners are always on, and with minimal support needed if pool went offline? Right now, I am leaning towards WIn7 for my rigs. Use BAMT. https://bitcointalk.org/index.php?topic=28967.0 I am having a hard time finding a mining software that works under Win7 with fail-over support. GuiMiner is popular, but it doesn't have fail-over support for phoenix miners. I like phoenix miner with phatk2 kernel. BAMT has failover support and uses phoenix 1.6.2 with the phatk2 kernel. Diablo miner has fail-over support, but I am getting a bit lower hash rate than phoenix with phatk2. Also still trying to figure out how to assign each GPU a different username, so I can track each GPU on the web separately. BAMT has monitoring tools like mgpumon and gpumon so you do not have to worry about having seperate workers for each video card. What are your solutions in Linux and Win7? The best solutions is BAMT. Use it and donate to the creator. I run over 30Gh and have no issues with this system. Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: jamesg on January 12, 2012, 07:53:15 PM BTW, did I mention to use BAMT? ;D
Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: chungenhung on January 12, 2012, 07:54:38 PM BTW, did I mention to use BAMT? ;D ok, BAMT it is! Will take a hard look at it.Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: teek on January 12, 2012, 10:13:36 PM BTW, did I mention to use BAMT? ;D +1 we are in the process of moving ~20GH over to BAMT, about 10GH is up and running on bamt for the past week or two and I do agree it is nicely done.. Only downfall is the original dev seems to have stopped working on it.. but if you're handy with linux that is not that big of a deal.. The mgpumon program is sweeeet for monitoring your farm from a central console, you can have miners from all over the place report to it as well.. If you set it up right, you can change all your aggregate hashpower on all miners to another pool in 1 minute, literally. Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: chungenhung on January 12, 2012, 10:26:03 PM What if you have machines in MULTIPLE physical locations? Say one at home, another at work, and another at your little data center.
What would be the best way to manage it? I am thinking installing logmein hamachi, so I can access the rigs remotely. But I am having problem installing hamachi on Linux. Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: teek on January 12, 2012, 10:38:15 PM What if you have machines in MULTIPLE physical locations? Say one at home, another at work, and another at your little data center. What would be the best way to manage it? I am thinking installing logmein hamachi, so I can access the rigs remotely. But I am having problem installing hamachi on Linux. I haven't even looked at how the miners report, what port or protocol they are using, but if you have miners in multiple locations that have vpn between them like we do, then it's great for multiple physical locations, as long as the miners have a route to the the box running mgpumon.. If you investigate which port(s) to forward and set it up correctly, this could theoretically work without vpn.. As for actually managing the miners, you would have to be able to ssh to them, one way or another.. Theoretically you could build openvpn into the miners and have them connect back to you as soon as they get internet whereever they go or something like that.. Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: rjk on January 12, 2012, 10:43:08 PM I am thinking installing logmein hamachi, so I can access the rigs remotely. But I am having problem installing hamachi on Linux. Is hamachi even available for linux? I use NeoRouter (http://neorouter.com/) because it is cross-platform.Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: chungenhung on January 12, 2012, 11:17:05 PM yes, hamachi is available on windows, linux, and.....ARM!!!!
Downloaded and installed on Ubuntu. It worked this time. Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: Transisto on January 13, 2012, 07:08:04 AM mgpumon does not allow for monitoring of miners outside of the subnet.
I wonder how hard it would be to modify it. Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: P4man on January 13, 2012, 08:40:44 AM BAMT looks good, but does it support things like dynamic fan and clocks the way cgminer does?
If it doesnt, I would also consider cgminer on linuxcoin. Its essentially maintenance free (pool failover, auto recovery of stalled gpus etc). Consolidating the information in one screen the way BAMT does is still a bit work in progress, but its getting there. Anubis already lets you monitor (but not configure/manage) all your rigs from a single webpage. Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: trilby on January 13, 2012, 10:06:39 AM I am after a similar solution. I am wondering if BAMT can also support ZTEX FPGA's
Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: jamesg on January 13, 2012, 11:54:39 AM mgpumon does not allow for monitoring of miners outside of the subnet. I wonder how hard it would be to modify it. BAMT does support sending mgpumon info to a direct ip address. Please read the docs over at github. Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: chungenhung on January 13, 2012, 02:50:55 PM Testing out BAMT.
I try to install the lsb package using Code: apt-get install lsb http://img683.imageshack.us/img683/4709/53841654.jpg (http://imageshack.us/photo/my-images/683/53841654.jpg/) How do I manually download and install it? Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: JWU42 on January 14, 2012, 07:38:50 PM Trying to figure how to use BAMT on ABCpool where each miner is a GPU. The pools part seems to just allow one login. Guess I need that info on each GPU line?!?
Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: teek on January 14, 2012, 07:41:28 PM Trying to figure how to use BAMT on ABCpool where each miner is a GPU. The pools part seems to just allow one login. Guess I need that info on each GPU line?!? You can have as many pools as you want, add to /etc/bamt/pools one pool per line, if you look at the docs there are timeouts / submitted share thresholds too you can use in that file.. Alternatively, you could specify a separate pool file for each gpu if you so desire.. Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: chungenhung on January 15, 2012, 03:52:08 AM Testing out BAMT. I solved this. Simply need to do I try to install the lsb package using Code: apt-get install lsb http://img683.imageshack.us/img683/4709/53841654.jpg (http://imageshack.us/photo/my-images/683/53841654.jpg/) How do I manually download and install it? Code: apt-get update Title: Re: Best way to manage multiple rigs. Mgt program, miner, fallback, etc. Post by: The LT on January 16, 2012, 08:04:20 PM Linux + cgminer + mrtg does the job nicely.
|
