|
Title: Nanofury nf2 setup problems Post by: jeppe on April 27, 2014, 01:25:01 PM hi,
I have some nf2's that i cant get working i ran the nf2_init test and it passed, What settings are you all running them with? Thanks, JT Title: Re: Nanofury nf2 setup problems Post by: benjamin6green6 on August 13, 2014, 05:51:24 PM What mining software are you using?
if you are using BFGMiner do NOT use zadig to change the driver. zadig is only needed if you are using CGMiner. BFGMiner will automatically detect a NanoFury device using the standard HID Compliant Device driver it installs when plugged in. My suggestion is if you used zadig and you will be running BFGMiner to go into device manager, Right click on the NanoFury and click Uninstall, then unplug the NanoFury and plug it back in, then allow it to install the regular HID Compliant Device drivers and then run BFGMiner. Remember zadig breaks the drivers by forcefully changing them to a different driver. also zadig is only to be used for CFGMiner. if this helps please donate to 139DYVB1SG2TzipdcNNGym5n2DyEsmadYs |