Title: Building my first dedicated rig, how to not blow up mobo with risers? Post by: VirosaGITS on May 01, 2014, 08:32:26 PM I would like to understand how it works, learn from other's experience.
I got a H81 pro btc. I was told that if i use Ribbons riser, they all need to be on PSU 1, and then i can mix GPUs on PSU 1 and PSU 2. However if i have USB powered riser, i can do mobo + 3x gpu + risers on PSU 1 and 3x gpu + usb riser on PSU. Is that accurate? Can i mix USB and non usb risers as long as ribbons riser are on same PSU as mobo? Etc? Title: Re: Building my first dedicated rig, how to not blow up mobo with risers? Post by: VirosaGITS on May 02, 2014, 03:05:27 PM Does nobody knows or is it wished that i blow up my mobo? ;)
Title: Re: Building my first dedicated rig, how to not blow up mobo with risers? Post by: fattypig on May 02, 2014, 04:26:34 PM Does nobody knows or is it wished that i blow up my mobo? ;) Actually no, but it is better to have the riser in first psu cause when you power up. Everything go up at the same time. Its just better... Title: Re: Building my first dedicated rig, how to not blow up mobo with risers? Post by: VirosaGITS on May 02, 2014, 09:35:49 PM Okay thanks, i'll stick to all risers of any types on mobo's psu.
|