Bitcoin Forum

UPDATE!


This thread is created for the purpose of listing x11 based coins, and to gather all info about the coin in one spot.
and to provide info on how to mine.

The page is currently a simple draft. will add more info as i collect it :)

Benefits of X11

Up to 55% less power draw than scrypt
Less heat output. My 280x is running at 45-50c, compared to 75-80 on scrypt

Coins:

AVCoin                          https://bitcointalk.org/index.php?topic=613049.0
Badgercoin                     https://bitcointalk.org/index.php?topic=585796.0
BankCoin                       https://bitcointalk.org/index.php?topic=606388.0
Citizencoin                     https://bitcointalk.org/index.php?topic=526076.0
Conspiracy Coin              https://bitcointalk.org/index.php?topic=590841.0
Darkcoin                        https://bitcointalk.org/index.php?topic=421615.0
DistroCoin                      https://bitcointalk.org/index.php?topic=614921.0
DreamCoin                     https://bitcointalk.org/index.php?topic=599854.0
Electronic LIRA               https://bitcointalk.org/index.php?topic=561954.0
EuropeCoin                    https://bitcointalk.org/index.php?topic=594797.0
GiveCoin                        https://bitcointalk.org/index.php?topic=529181.0
Global Denomination         https://bitcointalk.org/index.php?topic=578574.0
GroinCoin                       https://bitcointalk.org/index.php?topic=627521.0
HappyCoin                     https://bitcointalk.org/index.php?topic=616114.0
HashCoin                       https://bitcointalk.org/index.php?topic=568453.0
HighFiveCoin                   https://bitcointalk.org/index.php?topic=558286.0
Hirocoin                         https://bitcointalk.org/index.php?topic=516349.0
HuskyCoin                      https://bitcointalk.org/index.php?topic=615268.0
Juggalocoin                    https://bitcointalk.org/index.php?topic=555896.0
Lamacoin                       https://bitcointalk.org/index.php?topic=592983.0
Leagecoin                      https://bitcointalk.org/index.php?topic=620284.0
LibertyCoin                     https://bitcointalk.org/index.php?topic=600322.0
Limecoin                        https://bitcointalk.org/index.php?topic=559534.0
LitecoinX                       https://bitcointalk.org/index.php?topic=624378.0
Logicoin                         https://bitcointalk.org/index.php?topic=567114.0
Mental Health Awereness  https://bitcointalk.org/index.php?topic=590957.0
Muniti                            https://bitcointalk.org/index.php?topic=545886.0
Nuggetcoin                     https://bitcointalk.org/index.php?topic=619049.0
PinkCoin  (POS)               https://bitcointalk.org/index.php?topic=591666.0
PureCoin                        https://bitcointalk.org/index.php?topic=627749.0
PHCoin                          https://bitcointalk.org/index.php?topic=589992.0
Quebecoin                     https://bitcointalk.org/index.php?topic=552561.0
Ratcoin                         https://bitcointalk.org/index.php?topic=619051.0
Republicoin                    https://bitcointalk.org/index.php?topic=615432.0
RightCoin                       https://bitcointalk.org/index.php?topic=607076.0
RomanCoin                     https://bitcointalk.org/index.php?topic=617724.0
SummerCoin                   https://bitcointalk.org/index.php?topic=581065.0
Studentscoin                 https://bitcointalk.org/index.php?topic=594088.0
Sync                            https://bitcointalk.org/index.php?topic=607919.0
Supercoin                      https://bitcointalk.org/index.php?topic=618552.0
TwilightCoin                   https://bitcointalk.org/index.php?topic=576107.0
VirtualCoin                     https://bitcointalk.org/index.php?topic=557946.0
WildWildWest                 https://bitcointalk.org/index.php?topic=607493.0
Wincoin                         https://bitcointalk.org/index.php?topic=612352.0
X11 Coin                        https://bitcointalk.org/index.php?topic=600706.0

How to mine:

You need special miners for it to work. The kernel has to be set to darkcoin. (./sgminer -k darkcoin)

Links:

CPU:
Source for minerd 1.2c (SSE2): https://github.com/ig0tik3d/darkcoin-cpuminer-1.2c
Source for minerd 1.3 (SSE4/5/AVX/AES-NI): https://github.com/elmad/darkcoin-cpuminer-1.3-avx-aes
Windows miner for systems with no SSE2 instruction set: http://darkcoin.io/downloads/xcoin-miner.zip
Windows miner (1.2c) for SSE2 systems: http://darkcoin.io/downloads/darkcoin-minerd-1.2c.zip
Windows miner (1.3) for SSE4-5-AVX-AES-NI systems: http://download.darkcoin.fr/darkCoin-cpuminer-1.3-avx-aes-windows-binaries.zip

GPU:
SPH-Sgminer: https://bitcointalk.org/index.php?topic=475795.0

Example for sgminer.conf for 280x:


X11 Multipools:

https://pool.trademybit.com (20 coins) (auto switch most profitable coin) (auto Exchange)
http://www.coinmine.pw/ (6 coins)  (auto switch most profitable coin)
https://ipominer.com/ (auto switch most profitable coin)
http://www.hashharder.com (8 coins)

https://nicehash.com/ (Cloud mining service, might be more profitable at times. currently pays 0.81BTC per GH which equals 0.00081 per MH)



Donations

I would like to see which coins are better and which coins are shits.

X11 drew our attention due to some requests from the PH community. I'll follow this and hope to implement on our coin so its listed here. :)

Add BadgerCoin  !!!

You missed Badgercoin - First X11 with Pow/Pos launched.

https://i.imgur.com/wAp7KfD.png

https://bitcointalk.org/index.php?topic=585796.0

added Badgercoin
added urls to announcement threads

will add a pool list which will consist of todays recommended pool depending on the coin that is most profitable, and maybe some x11 auto switch pools.

Edit: will try and add seperate lists for good coins and bad coins, although with how the market is, this might be difficult if not impossible.

Edgecoin ? U got to be kidding me. Why not add emirate coin as well ?

Good thread!
Which X11 coin is the most profitable to mine now?

x11 will be huge.
scrypt is so yesterday.

How efficient is minerd vs sph-sgminer ?   Does the gpu miner blow it out of the water ? I've been looking for a good cpu miner to squeeze a little bit more out of my mining rigs.

Edgecoin was a scam.

Look into Groestl. The GPU to CPU ratio is about 5-10x, much better than x11. GPU mining with Groestl is also way more efficient.

Does somebody know?

This, it's my question too

I will go for badger for medium run  ...look at the charts on polo , he jump to 100 % yesterday before the polo shutdwon ...
i personnaly mine all the X 11 i can do :)
A new one is pink coin https://bitcointalk.org/index.php?topic=591666.0  it looks crap but look a all power delivered is that pool http://pc.pool.mn now have almost 7 Giga global hashrate.

Rank   Donor   User Name   KH/s   PC/Day

1      anthraxlin   172,515   1,974,525.305
2      Habana   116,823   1,337,105.933
3      anonymous   102,208   1,169,826.083
4      tornado225   51,208   586,105.795
5      anonymous   47,400   542,518.318
6           lolo   35,189   402,759.984
7      anonymous   32,405   370,896.735
8      hieusui   24,401   279,288.565
9      creatune   23,095   264,332.604
10      anonymous   22,513   257,671.452

Oh, so many . Keep updating , thanks.

Removed Edgecoin

Added Pink coin.
Added Mental Health Awereness coin

Added 2 multipools

Thx for an update, mate!

LOL! totally agreed! add emirate :P

I would like to see which coins are better and which coins are shits.
 ;D

Bitcoin is better, all other coins are shit ;)

Added conspiracy coin

do you guys know how many watts if I mine x11 coin or grosetlcoin?

2 x 290 non x and 2 x 270x gpu

Please add Conspiracy Coin to the list: https://bitcointalk.org/index.php?topic=590841.0

about half what you get with scrypt.

290 running at stock volt, uses about 250watt. so i imagine half of that. 270x uses about 200watt at stock?

ofc its better to undervolt them and go down a few in core clock.

my 280x runs at 1040mhz and is undervolted from 1.2volt, to 1volt. which makes it use about 190watt on scrypt coins.

Added Lamacoin

added Hasharder multipool

Can you also add a poll for each of them , then we can see which X11 coin is better among us.  That's my good idea! ;D

you can easy see it at the GPU-Z, of each card ;)

which one I look at vddc power out or power in?

x11 really worth mining?

calculated all x11 coins btc/mh/day and they are not so profitable even they consume half electricity

bdg   0.00486396
give   0.00363970
dark   0.00330847
hifive0.00313711
logi   0.00269571
jug   0.00223223
hash   0.00218658
qbc   0.00215038
lim   0.00169552
mun   0.00162767
hiro   0.00136401
lire   0.00086283
gdn   0.00080730

Not as profitable as scrypt but im running about 10 rigs, and its summer time. the cost of having those machines mine scrypt, they all run at a temp of 80c for each gpu. and i need 3 ac units + a fan that sucks the hot air out of the room.

i went from 10kw usage, to about 3.5kw.

so its absolutly worth it for me.

and is your calc based per MH? because my total MH is about 95, so the numbers arent that bad.

right now I am mining trademybit x11 pool. my house is 90 degrees in the room that I put the rig and all 4 gpus is 70-75 stable at least so far. 

so far it is good for me. without worrying 85-90 degree gpu to be burn up. :?

you know that 1 mh/s in scrypt is 3 mh/s in x11, so 0.004 for only 1 mh/s x11 is pretty good lol

but perhaps you mean 1 mh/s in scrypt, so 3 mh/s with x11

PHCoin is about to launch x11 on its first day of wallet release .. This coming Thursday

love x11

running 4 x 7970's @ 1050/1450 1.013v pulling 588 watts

i7-3820 @ 1.6 ghz, 2 water pumps and 8 high speed fans, two fan controllers.

Nice to see X11 thread here!

Can someone point me where I can find good X11 conf to my rig:
Gigabyte R9 280x rev 2.0 (GV-R928XOC-3GD-GA)
Gigabyte HD 7950 rev 2.0 (GV-R795WF3-3GD)

280x should run on 2 threads with no problems, but what about 7950? Do I need to make it run on 1 thread or can it handle 2 threads too?

Thanks  :)

Any x11 official supported pools? PHCoin is launching X11 and want to see some compatible X11 pools

List them here

For 7950, I run: TC = 24000, gpu-threads = 1, intensity = 18.
For 280X, I run: TC = 8192,  gpu-threads = 2, intensity = 13.

Im not sure about 7950, but any normal scrypt settings work fine with x11.
for 280x, look at the main thread.



pools for a specific coin can be found in their ANN threads. no need to clutter this thread with it. all i do is list multipools and auto switch pools.

EDIT* Added PHcoin to the list

 thanks for adding and good idea to keep this directly x11 relevant.

Anyone have a working CPU miner for X11?
It's suppose to be quite efficient, but none of them work for me.
My Scrypt minerd/cpuminers work fine, but the ones from Darkcoin for example, do not fully work.  They crash shortly after starting the threads up.
I'm using -a X11 which it reports is fine before it crashes.

Cool informative thread. Please add dreamcoin to the list https://bitcointalk.org/index.php?topic=599854.0  Also, you can remove electronic yen, don't think the coin will ever launch.

Guys,

I cant get more than 1.4Mhash from my R9 280X sapphire, what is wrong with it? I tested all the setting combinations but it cannot go beyond 1.4Mhash

Added conspiracy coin

I have the sapphire 7970 dual X which is similar to the R9 280X.

I use: xIntensity 4, thread-currency = 8192, Gpu-threads = 2. Vcore = 0.94v V, core/memory = 840/1000MHz, the hash rate is 1.65 MH/s. I used the lower setting to have high energy efficiency as my electricity cost is high.

what is a good xI for 290 non x and 270x?

-I 13 -g 2 --thread-concurrency 8191 --lookup-gap 2 --gpu-engine 1052 --gpu-memclock 1500 -w 256 --gpu-powertune -20

Gigabyte 280x & Sapphire 7970 Dual-X both getting 2.1 MH with the above with voltage set in the BIOS on both at 1.085

I Still cant get more than 1.4Mhash from my r9 280x sapphire card.

It has to be something wrong!

Cool informative thread. Please add dreamcoin to the list https://bitcointalk.org/index.php?topic=599854.0  Also, you can remove electronic yen, don't think the coin will ever launch.

Added conspiracy coin

Why didn't you just quote my message instead of copying it?

He is doing this everywhere look at his posts

I see. Not sure what benefit he's getting out of this. Weird dude.

Activity and get "trust"

Added Europecoin

Maybe add LibertyCoin? https://bitcointalk.org/index.php?topic=600322.0

There are a lots of coins using X11 algo but I can't find decent coin to mine or invest amongst them...
tried DRK, HIRO, MUN, QBC, BDG, ERC, DRM ... and I don't see bright future in any of them... (only badger is fun and I kept, even bought some)

You see no future in Darkcoin and you instead choose to buy Badgercoin. I can only guess you researched Darkcoin for about 2 seconds, if that. Sorry to derail I just saw this and had to say something.

you calculate the MH per second like this.

if all your gpus do 100mh on x11.

then its 100/2 x (btc/mh/day)

so you multiply half of your MH with for example currently dreamcoin is 0.005 BTC/mh day

50 x 0.005 = 0.25

(equals 0.25 BTC a day)


Which is better than scrypt :)

PHCoin is getting ready to launch the x11 algo for its coin launch giving miners what they want... Not efficiency when Mining a coin they believe in. Thanks to the official team supporting and creating x11 algo

I am trying to CPU solo mine an X11 coin.  Trying to get it to work with Minerd 1.2c.  Anyone know what my command line should look like so I could mine straight to the open wallet??? What ever I find and try does not seem to work. Not worried about pool mining right now, just the solo mining command line.....Thanks!

Been away for the weekend, will add more info on several other coins.

So far X11 has been fantastic!

Best configuration for AMD Sapphire R9 280x Vapor-x. Hashrate --> 2.35 MH/s , REJECTED UNDER 1% , WU 0,034/per card , runs almost 7 hours. Last card is 5770. After overclocking i hit 750 kH/s with 5770. .
If someone need help with settings write me personal massage. Thanks.

http://s28.postimg.org/8ti6lcvl9/DRK.png

power:       555 w (all 4 cards, 3x 280 and one 5770)
Drivers:      14.4
win:           Win 7 x64
ram:           4GB
cpu:           Athlon x4


Settings:

"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "1",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"shares" : "0",
"auto-fan" : true,
"gpu-threads" : "4,4,4,2",
"gpu-dyninterval" : "7",
"gpu-engine" : "1160,1160,1160,800",
"gpu-fan" : "30-95",
"gpu-platform" : "0",
"gpu-memclock" : "1600,1600,1600,1000",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"intensity" : "15,15,15,18",
"kernel" : "darkcoin",
"temp-target" : "53",
"temp-overheat" : "85",
"temp-cutoff" : "88",
"temp-hysteresis" : "3",
"worksize" : "256,256,256,256",
"lookup-gap" : "2,2,2,2",
"shaders" : "2048,2048,2048,800",
"thread-concurrency" : "24576,24576,24576,8192",
"no-client-reconnect" : true,
"failover-switch-delay" : "60",
"no-pool-disable" : true,
"tcp-keepalive" : "30"
}

my 6 280x card rig consumes like 550watt on x11 and i get about 2.08 MH per card running at 1040ish/1500

So i think its better to undervolt, and have less mh per card.

is list updated daily ? There are at least 10 new x11 coin not listed on OP.

So busy at work :/ will try and update it today and make 2 lists, one for new coins & pow, and one for POS coins.

Added more coins :)

Did you use power meter to measure the power consumption?

I have 8 GPU rig with combination of 7970/7990. The power consumption is 730W. Total hash = 13.5MH/s.
core/memory= 850/1000MHz. VCore = 0.94V.

yeah i used a power meter. scrypt i get about 1250watt. and x11 its somewhere in the range of 550-600.

not sure about the 7990 tho. do you cound it as 2 gpus in your rig? but still 730watt for 8 cards isnt bad at all.

1X7990  = 2GPU.

What are your voltage settings and other configurations?

You are using higher clocks, so higher voltage. Therefore should be less efficient, but

Your efficiency: 2080*5/550 = 22.7 kH/s/W
My efficiency: 13500/730 = 18.4 kH/s/W

all my cards have been flashed to precisly 0.943volts since MSI are retarded and only allows 0.943v or 1.2v on the cards i got with serial starting with sb38

then i add +0.1v through msi after burner to get about 1.043 (althou afterburner reports 0.995)

and running at 1040/1500 (some cards manage 1060, some 1080) and mem is always 1500. i get about 2.08MH per card.

other config is the cfg setting in the main post.

i have also deactived everything possible in bios, and im using a 30gig ssd disk, low voltage ram with further voltage drop to about 1.2volt, running at 800mhz. undervolted cpu as well but its mostly idle it doesnt matter that much tho.

New miner: http://cryptomining-blog.com/wp-content/files/sph-sgminer_x11mod.zip

set kernel to x11mod

so far im getting about 2.85MH instead of 2.08

intensity set at 15 :)

jedimindtriks, did you find Catalyst 14.4 is faster than 13.12?

interesting question, tried installing it on my six card rig but didnt have the modded driver at hand so aborted the test (the comp will only install the driver on 5/6 gpus without the mod)

give me 10 minutes to test it on my rig with 5 cards.

I notice the openCL version of 13.12 and 14.4 is the same. I just tested both on my computer using the 14.4Mod, they are the same speed.

I am wondering why your 1.04V, 1040/1500MHz cards consume the same power as my 0.94V, 840/1000MHz cards and have higher hash rate. It should be 50% more due to the high voltage and clock speed.

checked the voltage today, system usage is about 550watt for 5 card setup, and about 650watt for 6 card setup. all i have is the killawatt.

as i said before. not 100% how to measure vddc. since gpuz and afterburner show different results.
but in my previous posts i explained what i did to lower the power usage as much as possible.



and i notice about 0.025 increase in hash going from 13.12 to 14.4
so basicly no change :) but the reject rate is about 1% on 2 of the 5 cards.

PHCoin launches its official x11 release to support Philippines in its hot weather and jobless economy ... PHCoin will solve those problems. Check the threads. Www.PHCoin.org

Please add GroinCoin (GXG) to the list of X11 coins - just launched this week.  It is hashing at about 245MH/s as a I write this and has 5 pools up so far....


https://bitcointalk.org/index.php?topic=627521.0

Added Groincoin

The community loves x11... Now PHCoin team understands why x11 is a great algo. Its quark like speeds with primecoin days of mining. Fun fun fun

Difficulty went as high as 150++

Hope x11 continues just need more PHC support for mining and adoption in all parts of the world especially Philippines

Getting some excellent rates on the latest kernel (see first post)
Have 4x MSI 280X getting around 3.277 Mh/s each.

Nice! if you havent undervolted your cards, you can get more, like 3.4MH

Note: Added NiceHash.com cloud mining service to the pool list.

It perplexes me that, not just one but, two of ya in a row can make it all the way to "Full Members" complete with "OG status" type shiny badges, regalia that, in a more honest era, symbolized "time spent and wisdom earned" yet now apparently nothing more than a string of font serving as a flat surface, one ascends a ladder of plastic rungs strung on lines of credit to to stand atop while tossing the word "noob" down to those of lessor title, and at the end of the day still not even know of "cointweak.com, coinwarz.com, or coindust.com"? LOL Such Very Wow!

anyone wanna share their sgminer config ? i would like to put it here, http://www.tackon.us/

i think i shared mine in the initial thread.

but ill share again.

"intensity" : "15,15,15,15,15,15",
"worksize" : "400,400,400,400,400,400",
"kernel" : "x11mod,x11mod,x11mod,x11mod,x11mod,x11mod",
"lookup-gap" : "2,2,2,2,2,2",
"thread-concurrency" : "8193,8193,8193,8193,8193,8193",
"gpu-threads" : "2,2,2,2,2,2",
"gpu-engine" : "0-1035,0-1025,0-1005,0-1035,0-1015,0-1035",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"


All cards have their speed adjusted if they stop, i go down 5 mhz until stable.

i have MSI 280x cards that are undervolted to exactly 0.943, then i add 0.1v with afterburner. (bug in the MSI cards with serial number starting with 38SB, where you can only have 0.943 or 1.2v in bios)

Most cards in my rigs cant go over 1040mhz.

wonderful thread, and bro has done so wonderful work,  it is so nice for people to find more informaton about the coin....

yeal, it is fantastic, the bro is so good....

What date was this update and when was that new miner build released? I've gotten newer kernals from sgminer builds released this month. The sgminer build I'm using is dated July 7th.

What are people getting with undervolted/underclocked cards?

I'm running 2 R9 280x cards down at almost 1.00v and 930/1220 @ 18intensity. They're getting about 2.8Mh/s, is that terrible or ok if they're running 930/1220? Running them low to save on power/heat, and its hott as balls in my place right now.

"intensity" : "13",
"worksize" : "400",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "930",
"gpu-memclock" : "1220",

Add Influxcoin X11 Pow+Pos Hybrid
Pool cryptominers.xyz