|
Title: does anyone have cgminer reporting hash rates properly with gs blades Post by: jjj0923 on May 04, 2014, 03:42:57 PM I am not sure if I'm really hashing at full speed or not since the latest cgminer is not reporting my hash rates properly with my 3 gridseed blades.
I have these setting in my cgminer.conf "kernel-path" : "/usr/local/bin", "gridseed-options" : "baud=115200,freq=850,chips=80", "expiry" : "120", "hotplug" : "5", "log" : "5", "no-pool-disable" : true, "scrypt" : true, "shares" : "0" ideas? cgminer version 3.7.2 - Started: [2014-05-04 17:01:06] -------------------------------------------------------------------------------- (5s):3.472M (avg):3.422Mh/s | A:495509 R:0 HW:5 WU:0.9/m ST: 97 SS: 0 NB: 586 LW: 758 GF: 115 RF: 0 Connected to 192.168.1.14 diff 67.5K with LP as user ninja Block: fad643b8... Diff:0 Started: [17:42:20] Best share: 151K -------------------------------------------------------------------------------- [P]ool management GSD 0: 48DA54503731 850 MHz | 578.8K/571.6Kh/s | A: 71646 R:0 HW:0 WU: 0.0/m GSD 1: 49024F5A3135 850 MHz | 578.8K/571.7Kh/s | A:201305 R:0 HW:0 WU: 0.1/m GSD 2: 48F0606E3135 850 MHz | 578.8K/571.7Kh/s | A:109260 R:0 HW:1 WU: 0.3/m GSD 3: 48F0733E3135 850 MHz | 578.7K/571.6Kh/s | A: 91263 R:0 HW:1 WU: 0.1/m GSD 4: 48FE854D3831 850 MHz | 578.8K/571.5Kh/s | A: 128 R:0 HW:2 WU: 0.1/m GSD 5: 48ED61673030 850 MHz | 578.8K/571.6Kh/s | A: 21907 R:0 HW:1 WU: 0.2/m -------------------------------------------------------------------------------- I think it should be showing a lot more as my hash rate Title: Re: does anyone have cgminer reporting hash rates properly with gs blades Post by: DiggerPhil on May 04, 2014, 04:40:29 PM Try chips=40
Title: Re: does anyone have cgminer reporting hash rates properly with gs blades Post by: jjj0923 on May 04, 2014, 04:44:07 PM Try chips=40 tried that - no change UGH! "gridseed-options" : "baud=115200,freq=850,chips=40,modules=1,usefifo=0,btc=0", Title: Re: does anyone have cgminer reporting hash rates properly with gs blades Post by: DiggerPhil on May 04, 2014, 05:04:58 PM That is pretty much what I have, although mine is clocked lower. My cgminer reports 2.722M per blade, which is also reflected in the stats at the pool I mine at.
--gridseed-options=baud=115200,freq=800,chips=40,modules=1,usefifo=0 Have you tried pointing it at a pool and seeing what their stats report? Title: Re: does anyone have cgminer reporting hash rates properly with gs blades Post by: jjj0923 on May 04, 2014, 05:28:08 PM That is pretty much what I have, although mine is clocked lower. My cgminer reports 2.722M per blade, which is also reflected in the stats at the pool I mine at. --gridseed-options=baud=115200,freq=800,chips=40,modules=1,usefifo=0 Have you tried pointing it at a pool and seeing what their stats report? the pool does report that correct has rate - over 15 mhs in my case but I'd like cgminer to report it properly also - especially since I've seen examples my people whose cgminer is reporting properly - case in point: http://highoncoins.com/wp-content/uploads/2014/04/howto-make-gridseed-blade-mining-rig-6-690x454.jpg Title: Re: does anyone have cgminer reporting hash rates properly with gs blades Post by: DiggerPhil on May 04, 2014, 06:13:18 PM Are you running the cgminer that has been optimized for use with blades? The posting linked below indicates that some people were having issues with cgminer reporting the wrong hashrate with blades.
http://cryptomining-blog.com/1990-updated-cgminer-3-7-2-with-support-for-gridseed-5-chip-and-80-chip-gc3355-asics/ Title: Re: does anyone have cgminer reporting hash rates properly with gs blades Post by: jjj0923 on May 04, 2014, 07:47:41 PM Are you running the cgminer that has been optimized for use with blades? The posting linked below indicates that some people were having issues with cgminer reporting the wrong hashrate with blades. http://cryptomining-blog.com/1990-updated-cgminer-3-7-2-with-support-for-gridseed-5-chip-and-80-chip-gc3355-asics/ I actually downloaded a slighly different one found here: https://bitcointa.lk/threads/guide-gridseed-blade-80-chip-miner-support-tuning.299402/page-3 |
