|
Title: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: BitJrive on May 05, 2014, 11:09:45 PM In hand 3.5 TH miner including 3 1200w Plat PSUs and 1 860w Plat PSU. Ready to go. I took the ASIC's out of the crappy case and it dropped my temps by 10c. if you want the cases let me know. They are currently set up "all datorhall" style in my office/sauna. I also have 8 working 200 GH/s replacement cards im including, So another 1.6 TH/s minus the 2 required controller cards and the heat sinks. Im also throwing in another 10 KnC ASICs that either have some dead die issues or don't work at all. Most of all the loose cards work, again to some degree (most between 50-100+ GH/s) so if you like to tinker these are something to mess with. I just don't have the time to screw around with them. If you do find some of the loose cards that are completely dead I may be able to get them replaced under warranty. Maybe. SO to sum it all up....
3.5+ TH/s currently mining here: http://eligius.st/~wizkid057/newstats/userstats.php/14rrzZYLQyyfnp2z56B3DN1aEqDKLBvGYJ 1.6 TH/s loose cards that work but will need 2 controller cards and heat sinks (Or you can drown them in oil to save on heat sinks) 750 GH/s (On average) loose cards again no heat sinks and will require controller cards. 3 1200w platinum PSUs included. 1 860w platinum PSU included. Selling it all for $4.07 per GH or PM your best offer. Escrow fine if you pay any fees and the person has to be mutual. Local pick up in SOFL. Pics here: https://www.flickr.com/photos/124230236@N05/ Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: BitJrive on May 06, 2014, 11:47:38 PM Bump Anyone?
Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: padrino on May 07, 2014, 12:21:49 AM I just want to make sure I am reading this right.. You are selling 3.5Th for over $12K USD when the forum is running rampant with more power efficient 1Th/s systems just over $2K, say $6.5K for 3.5Th/s..
It's so high I want to make sure you didn't make a mistake with your asking price.. Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: BitJrive on May 07, 2014, 03:07:38 AM I just want to make sure I am reading this right.. You are selling 3.5Th for over $12K USD when the forum is running rampant with more power efficient 1Th/s systems just over $2K, say $6.5K for 3.5Th/s.. It's so high I want to make sure you didn't make a mistake with your asking price.. No mistake. OBO I don't see any 1 th miners for 2k that can be in hand in by tomorrow.... Nor do I see them shipping with 3 1200w platinum PSU's... Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: samsonn25 on May 07, 2014, 05:46:18 AM $2 GH is alot already
Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: Killerloop on May 07, 2014, 07:07:12 AM Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: nitehawk on May 07, 2014, 07:13:33 AM I just want to make sure I am reading this right.. You are selling 3.5Th for over $12K USD when the forum is running rampant with more power efficient 1Th/s systems just over $2K, say $6.5K for 3.5Th/s.. It's so high I want to make sure you didn't make a mistake with your asking price.. i had to ask the same question.... I think thats south Florida.. but not sure Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: Killerloop on May 07, 2014, 07:27:08 AM Ok, when price drops to 1.5$ this equipment may be worth consideration :)
Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: ChuckBuck on May 07, 2014, 02:56:59 PM I just want to make sure I am reading this right.. You are selling 3.5Th for over $12K USD when the forum is running rampant with more power efficient 1Th/s systems just over $2K, say $6.5K for 3.5Th/s.. It's so high I want to make sure you didn't make a mistake with your asking price.. No mistake. OBO I don't see any 1 th miners for 2k that can be in hand in by tomorrow.... Nor do I see them shipping with 3 1200w platinum PSU's... Not tomorrow but within days. S2 is $2200 after $400 coupon and the Bit-tech 950 GH/s A1 clone is $2150. PSU's included already. Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: BitJrive on May 07, 2014, 05:04:20 PM I just want to make sure I am reading this right.. You are selling 3.5Th for over $12K USD when the forum is running rampant with more power efficient 1Th/s systems just over $2K, say $6.5K for 3.5Th/s.. It's so high I want to make sure you didn't make a mistake with your asking price.. i had to ask the same question.... I think thats south Florida.. but not sure Yes, SOuth FLorida Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: BitJrive on May 07, 2014, 05:21:45 PM I just want to make sure I am reading this right.. You are selling 3.5Th for over $12K USD when the forum is running rampant with more power efficient 1Th/s systems just over $2K, say $6.5K for 3.5Th/s.. It's so high I want to make sure you didn't make a mistake with your asking price.. No mistake. OBO I don't see any 1 th miners for 2k that can be in hand in by tomorrow.... Nor do I see them shipping with 3 1200w platinum PSU's... Not tomorrow but within days. S2 is $2200 after $400 coupon and the Bit-tech 950 GH/s A1 clone is $2150. PSU's included already. Yeah I have had my fair share of issues with bitmain.. No reboot after power hit, issues with SDs.... These are KnC cards that are up and running no issues. When running 3k+ watts its just dumb imo to run anything less than a plat psu. Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: dominic25 on July 26, 2014, 02:49:43 PM I just want to make sure I am reading this right.. You are selling 3.5Th for over $12K USD when the forum is running rampant with more power efficient 1Th/s systems just over $2K, say $6.5K for 3.5Th/s.. It's so high I want to make sure you didn't make a mistake with your asking price.. No mistake. OBO I don't see any 1 th miners for 2k that can be in hand in by tomorrow.... Nor do I see them shipping with 3 1200w platinum PSU's... Not tomorrow but within days. S2 is $2200 after $400 coupon and the Bit-tech 950 GH/s A1 clone is $2150. PSU's included already. Yeah I have had my fair share of issues with bitmain.. No reboot after power hit, issues with SDs.... These are KnC cards that are up and running no issues. When running 3k+ watts its just dumb imo to run anything less than a plat psu. Hello, I am looking for a controller board for a Neptune. Mine stopped working after a few weeks. Does anyone have one to sell me? I am in South Florida. Delray Beach. Thanks! Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: zulover on July 26, 2014, 03:07:47 PM I just want to make sure I am reading this right.. You are selling 3.5Th for over $12K USD when the forum is running rampant with more power efficient 1Th/s systems just over $2K, say $6.5K for 3.5Th/s.. It's so high I want to make sure you didn't make a mistake with your asking price.. No mistake. OBO I don't see any 1 th miners for 2k that can be in hand in by tomorrow.... Nor do I see them shipping with 3 1200w platinum PSU's... i can pick up 4ths for 4k next day. $4 per gig lol that worlds dead Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: ashe on July 26, 2014, 05:55:59 PM accept paypal?
Title: Re: [WTS] 3.5 TH KnC Franken Joops In hand. Post by: dogie on July 26, 2014, 08:24:36 PM I just want to make sure I am reading this right.. You are selling 3.5Th for over $12K USD when the forum is running rampant with more power efficient 1Th/s systems just over $2K, say $6.5K for 3.5Th/s.. It's so high I want to make sure you didn't make a mistake with your asking price.. No mistake. OBO I don't see any 1 th miners for 2k that can be in hand in by tomorrow.... Nor do I see them shipping with 3 1200w platinum PSU's... i can pick up 4ths for 4k next day. $4 per gig lol that worlds dead This is a bumped thread from the start of May, jeez. |